Top 10 Most-Read PCB Design Articles of 2017


Reading time ( words)

1. TTM Shines a Light on Optical Interconnect

Are embedded optics on PCBs set to make a breakthrough in the upcoming years? According to Dr. Craig Davidson, VP of Corporate Technology at TTM, it might be closer than you’d expect. In a recent interview with the I-Connect007 team, Craig outlines TTM’s current pursuit of high-volume manufacturing lines able to deliver embedded optical interconnect, what that would mean for the PCB industry, and why he thinks there will be manufacturing production capability by 2020.

2. Tom Hausherr Discusses PCB Libraries’ BOM Builder Service

PCB Libraries CEO Tom Hausherr and Editor Kelly Dack discuss PCB Libraries’ new BOM Builder service during IPC APEX EXPO. Equipped with the new LEAP technology, the BOM Builder can potentially save PCB designers days or weeks of time normally spent turning a BOM into a CAD library.

3. Perpetual or Subscription EDA Tool Licenses? That is the Question

After I began working at Altium, I started learning all I could about PCB design software licensing. I wondered about the pros and cons of perpetual vs. subscription licenses. I wanted to learn firsthand from PCB designers what kind of benefits they received and challenges they faced as a result of how EDA companies offered design tools. I reached out to a variety of sources to get a broad slice of insight into this evolving issue, and thus began my trip down the EDA licensing software rabbit hole.

4. Sales and Marketing with DownStream Technologies

From its inception, DownStream Technologies has been a new kind of software tool company. DownStream’s post-processing tools address one of the most unpopular parts of the design process: documentation. DownStream's CEO Rick Almeida discusses some of his firm’s marketing and sales methods, the trends that he sees, and the influence of the Internet on marketing.

5. Altium’s Sales Plan: Deal Directly with Designers

 Altium has been shaking up the EDA world for quite some time. The Australian company once slashed the cost of Altium Designer by 75% to grow market share, and who could forget their famous (or infamous) “Bunny” ad campaign? In this email interview with Lawrence Romine, Altium’s global head of field marketing, he shares his views on sales and marketing in the EDA world, as well as Altium’s philosophy on selling EDA tools.

6. The Evolution of PCB Design and Designers

According to Rainer Asfalg of Altium, VP Sales EMEA, EDA companies owe it to their customers to provide much more than just a standard design tool. Barry Matties met with Rainer at the recent electronica show to discuss the continued evolution of the design process towards automation, and what this might mean for the education and overall requirements of PCB designers going forward.

7. A Handy Compilation of Our Top 10 DFM Articles

When we started working on this DFM issue, I searched through our files and found that we’ve published some great DFM articles over the past year or so. While topics like signal integrity tend to get most of the limelight, in the end it all comes down to solid DFM practices. So, without further ado, we present this compilation of our Top 10 DFM articles and columns.

8. Happy Holden and Charles Pfeil Discuss the Past and Future of PCB Design, Part 1

When it comes to the PCB design community and the challenges facing it, as well as where design has been and where it’s heading, there aren’t many people as qualified to speak on the topic as long-time industry veterans Happy Holden and Charles Pfeil. Joined by I-Connect007’s Barry Matties at the recent AltiumLive 2017 event in San Diego, the three sat down for a discussion about the current state of PCB design, what the future holds, and what it means to be a designer.

9. In Deep: The Art and Science of DFM with Gary Ferrari

When the topic of DFM techniques came up, I knew I had to talk with Gary Ferrari of FTG Corp. Gary has been involved with designing and manufacturing PCBs for decades, and he’s the past co-founder and executive director of the IPC Designers Council. I caught up with Gary between Thanksgiving and Christmas, and we conducted the following interview.

10. Performance Evaluation of Thin-Film Embedded Resistors

Thin-film microstrip circuits have been widely applied in microwave communications, electronic countermeasures (ECM), and aerospace applications, etc. When manufacturing thin-film ICs, it is very important to apply deposited thin-film resistor material to fabricate high-accuracy and highly stable thin-film embedded resistors. Thin-film ICs call for thin-film resistors that meet

Share


Suggested Items

Excerpt: The Printed Circuit Designer’s Guide to…Flex and Rigid-Flex Fundamentals

06/25/2018 | Dave Lackey and Anaya Vardya, American Standard Circuits
The design process is arguably the most important part of the flex circuit procurement process. The decisions made in the design process will have a lasting impact, for better or worse, throughout the manufacturing cycle. In advance of providing important details about the actual construction of the flex circuit, it is of value to provide some sort of understanding of the expected use environment for the finished product.

APCT Moves into Rigid-Flex with Cartel, Cirtech Acquisition

06/18/2018 | Andy Shaughnessy
When I spoke with APCT President Steve Robinson a year ago, he said he was interested in adding flex and rigid-flex capabilities, and working closely with designers and engineers. With the recent acquisition of Cartel and their subsidiary Cirtech, APCT now has a flex and rigidflex facility, along with military and aerospace certifications. At DesignCon 2018, I asked Steve to discuss these acquisitions and what they mean for APCT and their customers.

Field Trip: CID Class Sees How Flex is Made at Streamline Circuits

06/06/2018 | Kelly Dack, CID+, EPTAC
While I was teaching my CID class for EPTAC in Santa Clara, I learned that we were only a block away from Streamline Circuits. Streamline does a lot of military and aerospace work, as well as communications and industrial electronics. The company manufactures quite a bit of multilayer flex and rigid-flex circuits, in addition to rigid boards. This would make a great field trip for my CID class!



Copyright © 2018 I-Connect007. All rights reserved.