Insulectro Hosts Silicon Valley Designers Council Meeting


Reading time ( words)

On October 15, about 25 people gathered for the IPC Designers Council Silicon Valley Chapter meeting at Insulectro's facility in Mountain View, California. The 1.5-hour meeting opened with a warm welcome from Chapter President Bob McCreight, CID, a PCBA designer at Tesla Motors, and Jason Marsh, VP of product management at Insulectro.

meeting_designers.jpg

The meeting focused on solder joints, and how circuit design can contribute to the success or failure of a solder joint.

carl_schattke.jpg

Carl Schattke, senior PCB design engineer at Tesla, was the main speaker. Carl's presentation covered a variety of facets of PCB design, from shadowing to the location of component based on weight and surface finishes. The presentation was filled with great images that supported Schattke’s thoughtful coverage of these topics.

layout_tips.jpg

The room was filled primarily with well-seasoned circuit designers, a couple of suppliers, and a few people from Shenmao Technology Group, who provided some of the PowerPoint images for Schatte’s presentation.

presentation_designers.jpg

presentation_designers1.jpg

 About the IPC Designers Council

The IPC Designer's council was formed in 1991 to provide continuing education of the PCB designer. There is no cost to join the Designers Council. While regular IPC membership is reserved for companies, the Designers Council is a separate professional society for individuals, with its own separate benefits. These include discounts on design-related events and IPC standards, as well as the chance for designers to advance their technical education and network with other PCB designers and technologists at local chapter meetings.

Local chapters host roundtable discussions, facility tours, and “lunch & learn” presentations on critical design and manufacturing issues. Chapters also form study groups to help members study for the CID (Certified Interconnect Designer-Basic) and CID+ advanced exams.

There are Designers Council chapters around the world, but there might not be a local DC chapter near you. Don’t despair. If you have at least 12 designers who can meet at least four times a year, why not start your own chapter?     

If you would like to learn more about the IPC Designers Council, or even start your own local chapter, send an e-mail to design@ipc.org, or visit http://dc.ipc.org

Share


Suggested Items

Fadi Deek Discusses Mentor’s New Power Integrity eBook

04/22/2018 | Andy Shaughnessy, Design007 Magazine
At DesignCon 2018, I ran into Mentor’s Fadi Deek, the author of both of Mentor’s I-Connect007 eBooks: the newest, "The Printed Circuit Designer’s Guide to Power Integrity by Example," and their first book, "The Printed Circuit Designer’s Guide to Signal Integrity by Example." We sat down and discussed how the idea for the books came about, as well as some of the power integrity challenges facing PCB designers and engineers.

Mentor’s HyperLynx Automates SERDES Channel Design

04/09/2018 | Andy Shaughnessy, Design007 Magazine
Mentor recently released the newest version of its HyperLynx signal integrity software. This version may be the first SI tool in the industry to fully automate SERDES design channel validation. I spoke recently with Chuck Ferry, product marketing manager with Mentor, about the new HyperLynx and some of the new serial link design capabilities that customers have been demanding.

Julie Ellis: TTM’s Interface Between Designer and Fabricator

04/04/2018 | Barry Matties, Publisher, I-Connect007
As a field application engineer for TTM, Julie Ellis sees the problems that can occur between circuit board designers and manufacturers. Barry Matties spoke with Julie at the AltiumLive event in Munich about the age-old problem of throwing designs “over the wall,” the trend towards HDI, and what advice she would give new designers.



Copyright © 2018 I-Connect007. All rights reserved.