-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
RF and Wireless Design Means Fighting Interference, Loss
April 24, 2023 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
Keysight EDA has been in the RF and microwave design industry for decades. We asked How-Siang Yap, product manager for Keysight EDA’s RF and microwave software tools, to share his thoughts on RF design tips and techniques, and how designing boards at RF speeds compares with designing PCBs at slower speeds. As he explains, much of RF design involves battling interference and loss.
How does designing PCBs for wireless communications differ from designing a traditional PCB?
The major differences in designing PCBs for wireless communications are:
- Layout of traces, vias, interconnects, and packaging must consider the electromagnetic behavior of these physical structures on wireless communication performance.
- Layout must be optimized for RF (radio frequency) sensitivity to prevent interference and noise coupling from non-wireless and digital sections by shielding, absorption, or isolation.
- Layout must consider impedance matching between components and to antennas for optimal power transfer and low noise performance. This means that trace ground reference, shape, widths, and interconnecting transitions are not arbitrary, and they must obey RF signal propagation and radiation geometries.
- Select material properties of PCB board and layer stackup arrangements to ensure minimal loss of precious RF wireless signals to optimize performance.
What sort of problems do designers face in the RF arena that they don’t see with typical PCB designs?
Based on these differences, we can see that RF PCB design is not just designing interconnecting traces to fit onto a board. We must also consider how RF signals are protected from interference from non-RF sections on the same board and propagated along RF transmission lines such as co-planar waveguides (CPW) or microstrips with careful shaping of transitions and bends to prevent signal reflection and insertion loss.
To read this entire article, which appeared in the April 2023 issue of Design007 Magazine, click here.
Suggested Items
Würth Elektronik in United States Embarks on New Milestone with State-of-the-Art Headquarters
05/17/2024 | Wurth ElektronikWürth Elektronik in the United States, a leading manufacturer of electronic and electromechanical components as well as custom magnetics, has announced the commencement of construction on a new 70,000-square-foot headquarters. This new facility underscores the company’s commitment to innovation and grow in the electronics industry.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
Airbus Achieves Eurodrone’s Preliminary Design Review
05/16/2024 | AirbusThe Eurodrone programme has successfully performed the Preliminary Design Review (PDR). Led by Airbus Defence and Space as prime contractor, this major programme milestone has been completed with OCCAR and representatives of the four customer nations (France, Germany, Italy and Spain) in the presence of the three Major Sub-Contractors (MSC), Airbus Defence and Space Spain, Dassault Aviation and Leonardo.
A Review of the 2024 Del Mar Electronics and Manufacturing Show
05/16/2024 | Barry Matties, I-Connect007The Del Mar Electronics and Manufacturing Show (DMEMS) in Del Mar, California, recently took place at an unlikely venue: the Del Mar Fairgrounds. Doug Bodenstab, founder and show organizer, says the show covers everything in electronics manufacturing: design tools, components, base materials, training, testing, board fabrication, AI, data analytics, and more. While you can find about anything online these days, Bodenstab adds that there is no substitute for meeting people in person.
TactoTek Licenses IMSE Technology to Polestar for Sustainable Electronics Design Innovation
05/15/2024 | TactoTekPolestar, the Swedish electric performance car brand, and Finnish smart surface pioneer TactoTek, have entered a collaboration to explore integration of Injection Molded Structural Electronics (IMSE) technology into Polestar’s vehicle programs.