-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Design for Cost in Real-time
April 24, 2023 | Paul Carpine, Siemens Digital Industries SoftwareEstimated reading time: 1 minute
When do you first start thinking about the selling price of your new product? It’s impossible to avoid the question of what the price will be. The worst answer is: “I don’t know, let’s see after the first samples.”
Let’s say the product’s selling price is $49; then the manufacturing cost will be $20. During each design change, the manufacturing cost should be recalculated to make sure the product is still competitive. This means you should involve people from both the development and cost calculation teams. This circle will be repeated until the final design is released, and the final calculation is done. Of course, if a small design change with “no impact for production” is not sent for evaluation, this is already a risk.
What if we had a software that was able to recalculate the price of the product in real-time during the design? What if we had something implemented into the design tool that was able to understand the change and recalculate the manufacturing price?
It is hard to find a product without a PCBA inside, and calculating the manufacturing cost for this component is not easy. It can be made in the beginning of the project based on several inputs, but what factors should you consider when you start the design? These same factors should be implemented inside this magic cost calculation software.
The cost calculation activity is irritating when your focus is hardware development and/or layout design. How do you evaluate whether a small change will increase a PCBA’s final cost? Here, I list the most important factors in the design that can impact the manufacturing cost.
The first way to keep the cost low is to use a surface mount device (SMD). Electronics manufacturing production is expensive, and each surface and machine should be utilized efficiently. Having only SMDs in your design means it is not necessary to use another line just for the through-hole devices (THDs). This will save time in production and will reduce the risk of quality issues. The SMDs are placed by the pick-and-place machine and soldered in the reflow oven, but for THDs, the process is very time consuming.
To read this entire article, which appeared in the April 2023 issue of Design007 Magazine, click here.
SPONSORED LINK
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.