Cadence Revolutionizes System Design with Optimality Explorer for AI-Driven Optimization of Electronic Systems


Reading time ( words)

Cadence Design Systems, Inc. announced the Cadence® Optimality Intelligent System Explorer, which enables multi-disciplinary analysis and optimization (MDAO) realization of electronic systems. After revolutionizing simulation and delivering several products with breakthrough performance and accuracy, Cadence has focused on optimization, first introducing the disruptive Cadence Cerebrus™ Intelligent Chip Explorer, and now Optimality Explorer. Leveraging similar AI technology as used in Cadence Cerebrus to yield groundbreaking results, Optimality Explorer delivers optimized designs on average 10X faster than traditional manual methods, with up to a 100X speedup realized on some designs. Optimality Explorer further extends Cadence’s system analysis leadership by delivering to market an industry first: an AI-driven, MDAO-enabled in-design multiphysics system analysis solution.

Cadence’s Clarity™ 3D Solver for 3D electromagnetic (EM) analysis and Sigrity™ X technologies for high-speed signal integrity (SI) and power integrity (PI) analyses are the first Cadence multiphysics system analysis software products to embrace Optimality Explorer. With Optimality Explorer, Clarity and Sigrity X solvers can significantly improve designers’ productivity and efficiency by enabling design teams to explore the entire design space and quickly and efficiently converge on the optimal design.

Optimality Intelligent System Explorer delivers the following benefits:

  • Design insight: Enables designers to quickly determine optimum electrical performance, avoiding suboptimal local minima and maxima, while mapping variations for additional consideration and exploration of the complete design space
  • Improved productivity: Empowers design engineers and teams to efficiently achieve optimized system-level designs, improving productivity by 10X on average when compared to manual, brute-force parametric table studies, with up to a 100X speedup realized on some designs
  • Easy-to-use interface: Flexible use model allows customers to activate Optimality Explorer from the Clarity and Sigrity X environments for fast invocation of MDAO
  • Extensible solution: Allows customers to extend AI-driven optimization across Cadence’s multiphysics technologies to create a comprehensive computational software solution spanning simulation, optimization and signoff

“For years, optimization at the system level has been extremely inefficient based on a human-intensive workflow of design/prototype/test/refine and eventual manufacturing,” said Ben Gu, vice president of R&D for the Multiphysics System Analysis Business Unit at Cadence. “With Optimality Explorer’s MDAO capability, it’s now possible to perform system-level optimization, from the IC to the package, the PCB and the system, in a fraction of the time and with Cadence’s signature gold-standard accuracy.” 

Customer Endorsements

“In a high-speed package design, it’s a cost- and performance-effective process to optimize the design before taping out. For our DDR package optimization process, Cadence’s Optimality Explorer-empowered Clarity 3D Solver enabled us to uncover the best parameter configuration, meeting our design criteria in a dramatically shorter time window, thereby speeding up our time to market while enabling us to deliver a higher performing solution,” said Alan Zhu, VP of Hardware at Ambarella.

“The Clarity 3D Solver provided unparalleled speed and capacity with proven accuracy throughout our next-generation Kunlunxin AI chip project. We utilize Clarity 3D Solver for high-speed channel modeling and optimization. Now, with Cadence’s Optimality Explorer, we reduced the amount of time we spent on optimizing transmission line performance from hours to minutes. We were able to tune the physical parameters of a high-speed differential pair routing constraint much faster than previous methodologies. The time saved can be used to optimize other parts of our design so that all critical interfaces operate at peak performance,” said Canghai Gu, Chief Chip Architect of Kunlunxin at Baidu

“MediaTek is a leader in SerDes design and technology. The Cadence Optimality Explorer and Clarity 3D Solver allowed us to realize a 75% performance improvement for our recent 112G PAM4 SerDes project. The optimum return and insertion loss, and TDR waveforms, were determined quickly and efficiently due to Cadence’s breakthrough AI-driven optimization, accelerating the design team’s productivity and ultimately the success of the final product,” said Aaron Yang and Howard Yin, Design Directors at MediaTek.

“As an early adopter of the Cadence Optimality Intelligent System Explorer, we stressed its performance on a rigid-flex PCB with multiple via structures and transmission lines. The Optimality Explorer’s AI-driven optimization allowed us to uncover novel designs and methodologies that we would not have achieved otherwise. Optimality Explorer adds intelligence to the powerful Clarity 3D Solver, letting us meet our performance target with accelerated efficiency,” said Kyle Chen, Principal Hardware Engineer at Microsoft.

Share




Suggested Items

Master the Art of Communication With Manufacturers

06/30/2022 | Kyle Burk, KBJ Engineering
As mentioned in the May issue of Design007 Magazine, design is performed, at times, in a vacuum. But it doesn’t have to be that way. Whenever circumstances allow, design should be performed by communicating with all stakeholders throughout the design process, hence the emphasis on the word with in DWM. Communication can occur through personal correspondence such as email and voice conversations or through more formal design meetings—in person or through videoconferencing. No matter which means of communication you prefer, it’s important to communicate early and often with stakeholders involved in the downstream processes as you bring your project to realization.

Altimade Puts Designers and Manufacturers Together

06/24/2022 | Andy Shaughnessy, Design007 Magazine
Despite all of the talk about the need for communication between designers and manufacturers, many PCB designers still do not talk with their manufacturers for a variety of reasons. Altium and MacroFab aim to change this dynamic. In this interview, Ted Pawela, chief ecosystem officer of Altium and head of Altium’s Nexar Business Unit, and MacroFab CEO Misha Govshteyn, discuss the new Altimade manufacturing service that Altium is introducing in partnership with MacroFab. Ted and Misha provide an overview of the Altimade process, how it links designers to fabricators, assembly providers, and component distributors, and they explain how it could pave the way for true design with manufacturing, or DWM.

The Survey Said: Why Don’t You Know Your Fabricator?

06/23/2022 | I-Connect007 Editorial Team
When we want to find out what challenges our readers are facing, we just ask. And they don’t mind sharing—the good, the bad, and the ugly. In a recent survey, we asked our PCB designer readers, “Why don’t you know who is going to manufacture your boards?” Here are some of more interesting replies we received, edited slightly for clarity. Do you see yourself in these replies?



Copyright © 2022 I-Connect007. All rights reserved.