-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
March 4, 2022 | Nolan Johnson, I-Connect007Estimated reading time: 3 minutes
In the news this week we found a synchrony of topics. Much of the world is aware of the speaking points from U.S. President Joe Biden’s State of the Union address this past Tuesday. In that speech, President Biden talked prominently about U.S. legislation in process to bring more technology manufacturing back to the states. In fact, Intel CEO Pat Gelsinger was not only an invited guest, but was referred to directly in the speech as a positive example. I can only assume that President Biden meant that moment to be a motivator for other CEOs in the industry.
But President Biden’s speech only went so far in his mentions. We in the printed circuit manufacturing industry know that semiconductors aren’t useful until you can connect them to the entire system. Funding chips alone will not be enough. Organizations such as IPC and PCBAA are working to help legislators in the U.S. (and globally, in IPC’s case) understand that critical attention and development thought needs to be focused on the printed circuit portion of the supply chain if they want the semiconductor investment to be successful.
The March issue of SMT007 Magazine was released this week. This month, we looked at the strategic investment environment in the U.S. and internationally. It is our intention to help move this conversation forward—not for political reasons, but for the good and resilience of our industry worldwide. Please give it a read.
My other favorite picks this week include:
IPC Applauds Biden’s Focus on Semiconductors, Urges Passage of Competitiveness Legislation
Published March 2
Released to the press on the day of President Biden’s State of the Union address, IPC highlighted the anticipated sections that would address our industry. IPC pledged to “continue to work with the Biden’s Administration to strengthen America’s semiconductor supply chain and urges the swift passage of competitiveness legislation to help expand the domestic semiconductor and electronics manufacturing industries.” I don’t have to say much more about why this is so important.
Northrop Grumman Develops Prototype Constellation Supporting Joint All-Domain Command
Published March 1
From the press release, “Northrop Grumman leveraged its commercial marketplace partnerships to deliver a rapid, affordable, highly-effective solution for SDA. “We’ve fully embraced SDA’s rapid, go-to-market spirit. It’s this vision for speed that allows us to field an innovative system quickly,” said Blake Bullock, vice president, communication systems, Northrop Grumman.” The U.S. Department of Defense has been working diligently on its communications systems between military units, and this is a welcome solution.
SEMI Survey Highlights U.S. Chip Industry Competitiveness, Government Investment
Published February 28
SEMI highlights three primary takeaways from the survey, intended to identify the challenges facing the semiconductor industry:
- Invest in the Entire Semiconductor Ecosystem
- Public and Private Funding is Key
- Invest in Multi-Generational Workforce Initiatives
Not unsurprisingly, these are the same takeaways as we find in the PCB manufacturing ecosystem as well. Read the article for more details.
North American EMS Industry Down 6% in January
Published February 28
Don’t panic too quickly. Though total North American EMS shipments in January 2022 were down 6% compared to the same month last year, the book-to-bill ratio stands, however, at 1.58. Click through to read all the details on IPC’s EMS Shipments report.
IPC: North American PCB Industry Sales Up 7.7% in January
Published February 25
Shawn DuBravac, IPC chief economist, says “We believe supply chain constraints will continue to slowly ease through the remainder of the year which should help companies improve shipment schedules.” We’re not out of the woods yet, but there are positive signs of recovery.
David Pogue Keynote Opens IPC APEX EXPO 2022
Published February 28
Pete Starkey’s inimitable reporting style brings Pogue’s keynote to life. It’s as simple as that. Readers flocked to this particular news item as well. In fact, reads were high enough to make this one article, the keynote report from our special Real Time with… IPC APEX EXPO Show & Tell Magazine a statistical outlier. I just had to include it. I’m going to be talking about this issue a lot, because there’s much to be gained from our coverage of the show. If you were there, you’ll see what I mean. If you weren’t, you won’t feel like you missed a beat.
Suggested Items
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
All Flex Solutions Hires Mike Madetzke as Manager of R&D
05/08/2024 | All Flex SolutionsAll Flex Solutions is very pleased to announce that Mike Madetzke has joined their team as their new Manager of Research and Development.
Shane Whiteside of Summit Reflects on Today's PCB Landscape
05/08/2024 | I-Connect007 Editorial TeamSummit Interconnect began as a printed circuit board manufacturing company just eight years ago and has seen impressive growth organically and through acquisition. Summit President and CEO Shane Whiteside takes a few moments to share his thoughts on the growing PCB industry in the United States.
America Projected to Triple Semiconductor Manufacturing Capacity by 2032, the Largest Rate of Growth in the World
05/08/2024 | SIAThe Semiconductor Industry Association (SIA), in partnership with the Boston Consulting Group (BCG), released a report on the global chip supply chain that projects the United States will triple its domestic semiconductor manufacturing capacity from 2022—when the CHIPS and Science Act (CHIPS) was enacted—to 2032.
Coherix Partners with EMU on 'Factory of the Future' Technology Program
05/08/2024 | PRNewswireMichigan-based Coherix is working with Eastern Michigan University (EMU) in Ypsilanti to develop "factory-of-the-future" manufacturing and assembly technology.