IPC Design Competition Winner Announced at IPC APEX EXPO 2022

Reading time ( words)

The inaugural IPC Design Competition at IPC APEX EXPO 2022 resulted in a win for Rafal Przeslawski, Xilinx, whose printed circuit board design earned him the top prize.

In late 2021, printed board design engineers from around the world were invited to compete in IPC’s inaugural PCB Design Competition. Intended to be accessible for anyone with a design tool and an internet connection, this new competition would challenge designers in two heats: an at-home, 30-day full board build, and an ‘in-person’ four-hour routing challenge at IPC APEX EXPO 2022.

In the preliminary heat, 14 designers from all corners of the globe – from India to the Netherlands; Oregon to the United Kingdom – were provided with a schematic, a component BOM, and scope of work document, and were asked to design a board that was compliant with IPC’s various board design standards. The given schematic was representative of a motor control board that included features intended to test the competitors’ understanding of various design methodologies.

Out of 14 preliminary competitors, three finalists were chosen to compete at the finals: Elliot Wakefield, a hobbyist based in the United States, Nick Wallis, an electronics engineer at Tribosonics in the United Kingdom, and Rafal Przeslawski, a hardware development engineer at Xilinx based in Germany.

The finals heat took place at IPC APEX EXPO 2022. The competitors were challenged to complete the design of a nearly complete board – missing only design rules, routing, and a few components left in the margins. “With only four hours to do so, completing the board was a careful balance of thoughtful component placement optimization and design rule definition, and brass-tacks routing,” explained Patrick Crawford, manager, design standards and related industry programs. “The board design was that of a functional, programmable blinky-badge that was actually fabricated and on display at IPC APEX EXPO. In other words, unlike the preliminary heat, the final design was representative of a real-world, functional application.”

At the end of the four hours, each competitor delivered their project file to the judges, who deliberated for two hours, ultimately crowning Rafal Przeslawski as the IPC Design Competition 2022 champion.

03/07/2023 | I-Connect007 Editorial Team

In this interview, Saline Lectronics (an Emerald EMS company) President Jason Sciberras talks about PCB designers offering packaging options in the bill of materials. As Jason explains, mil/aero manufacturers like Saline can’t make many changes to a design without getting recertified, so including approved packaging options in the BOM from the start is a great way to go. Are you offering options in your BOM?

02/17/2023 | Andy Shaughnessy, Design007

Design engineer Sathishkumar Vijayakumar (aka Sathish Kumar V.) with Tessolve Semiconductor, India, took home top honors in this year’s IPC Design Competition, besting the other four finalists in a rigid-flex design showdown during IPC APEX EXPO. Unlike last year, no one finished the design completely, so judges graded competitors on what they did finish, as well as criteria such as design decisions they made, and whether they followed electrical and DFM rules.

02/09/2023 | Zachariah Peterson, NWES

As I look back on 2022, I’m realizing that my company plays multiple roles in client projects beyond just designing circuits and PCBs. Sure, we’re primarily a PCB design company, but we also help with things that happen outside the PCB. This includes tasks like enclosure design, defining mechanical constraints, simulating electrical behavior, mating boards into larger assemblies, selecting cabling, and defining test requirements, all of which slowly creep into the standard scope of work for design projects.