Just Ask Happy: Manufacturing Issues From a Designer’s Viewpoint


Reading time ( words)

We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.

Q: What do you think are the biggest PCB fabrication/assembly issues from a designer’s perspective?

A: Communication and education! Designers need to know a lot about electrical circuits and their performance, but equally important is knowing how that circuit will be manufactured. But manufacturing is usually not part of a designer’s education, so designers have to go out of their way to meet the manufacturing community and to communicate with them on issues related to their designs. IPC and SMTA make this type of training available, but a designer has to be aggressive in learning about manufacturing and all the do’s and don’ts. 

To pose your own question for Happy Holden, take the survey by clicking here.

Share

Print


Suggested Items

Chris Hanson: New Ventec IMS Dielectrics Rated for Higher Temps

07/07/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy recently spoke with Chris Hanson, global head of IMS Technology for Ventec International Group. During their conversation, Chris discusses his group’s recent efforts to create new IMS materials, with a focus on dielectrics. As Chris explains, Ventec has developed several new dielectrics that can withstand much higher operating temperatures, one of which is UL-rated for a maximum operating temp of 155°C, which may be the highest for an IMS dielectric.

PCB Builder from Digi-Key Lets Customers Order Directly From Board Shops

06/04/2020 | Andy Shaughnessy, Design007
On June 2, components distributor Digi-Key Electronics announced the release of PCB Builder, a tool that lets customers have PCBs shipped directly from the fabricator. PCB Builder also allows customers to perform file layer checks and receive instant quotes from multiple fabricators. Andy Shaughnessy spoke with Josh Mickolio, supplier business development manager for Digi-Key, about the development of PCB Builder and what this tool means to PCB designers and design engineers.

This Month in Design007 Magazine: What Did You Expect From Me, Anyway?

05/14/2020 | Todd Westerhoff, Mentor, a Siemens business
As engineers, we work in the middle of a (usually long) process chain. It’s sort of like working on an intellectual assembly line—we get requirements and data as input, perform our particular task, and then provide our output as requirements and data to the next person on down the line. It seems easy enough. So, why is it that so many of the requirements we’re supposed to meet and so much of the data we receive is downright bad?



Copyright © 2020 I-Connect007. All rights reserved.