Ambarella Adopts Cadence Clarity 3D Solver for AI Vision Processor Development


Reading time ( words)

Cadence Design Systems, Inc. announced that Ambarella, Inc. has adopted the Cadence Clarity 3D Solver for design of their next-generation AI vision processors.

Ambarella’s products are used in a wide variety of human and computer vision applications, including video security, advanced driver assistance systems (ADAS), electronic mirror, drive recorder, driver/cabin monitoring, autonomous driving and robotic applications.

Per a recent evaluation, an Ambarella computer vision (CV) system on chip (SoC) and PCB were run on the Cadence Clarity 3D Solver. Results of both simulations show that when there is no solid reference plane for high-speed signals, the Clarity 3D Solver identifies the Ambarella design defects and correct scattering parameter (S-parameter) response. For both simulations, the Clarity 3D Solver, a 3D electromagnetic solver using 32 CPUs, took just 29 hours to process the case with 202 ports running at 48 bits via a LPDDR4 interface on a geometrical combination of package and PCB layout design.

“Ambarella continuously upgrades our system design methodologies to stay ahead of the competition,” said Chan Lee, vice president of VLSI at Ambarella, Inc. “The speed, capacity and accuracy of the Cadence Clarity 3D Solver enable us to accelerate our design process and shorten our schedule. We expect that many of the likely challenges of our next-generation 5nm AI design project can be easily and quickly addressed with the Cadence Clarity 3D Solver.”

The Clarity 3D Solver harnesses state-of-the-art distributed multiprocessing technology to efficiently tackle electromagnetic (EM) challenges encountered when designing complex 3D structures. The innovative Clarity 3D Solver is integrated with Cadence’s chip, package and PCB design solutions as part of Cadence’s Intelligent System Design strategy.

Share

Print


Suggested Items

Bridging the Simulation Tool Divide

04/12/2021 | I-Connect007 Editorial Team
Todd Westerhoff of Siemens EDA recently spoke with the I-Connect007 Editorial Team about the divide between users of high-powered enterprise simulation tools and those who need a more practical tool for everyday use, and how Siemens is working to bridge the gap. Todd also shared his views on why so many engineers do not use simulation, as well as advice for engineers just getting started with simulation tools.

Turning ‘Garbage In, Garbage Out' into ‘Good In, Good Out’

03/23/2021 | Tamara Jovanovic, Happiest Baby
In the PCB design cycle, it is so easy to unintentionally introduce “garbage” into your system. Unless you have time to extensively check everything you bring in from an external source, it is very likely that something will not match up with your design data. In the end, this means you’ll have to put more work into your design and basically reverse-engineer a part that was supposed to save you time and effort.

Cadence’s Celsius: Don’t End up Holding the Hot Potato!

12/17/2020 | Clive "Max" Maxfield, Maxfield High-Tech Consulting
I was just thinking about the party game Hot Potato. It reminded me of today’s increasingly competitive marketplace: Accurate thermal analysis must be performed, and any potential issues have to be identified and addressed as early as possible in the design cycle. Otherwise the system will run into problems, market windows will be missed, and someone will be left holding the hot potato. Trust me, you do not want to be that someone.



Copyright © 2021 I-Connect007. All rights reserved.