Congratulations to Steve Pudles! IPC Hall of Fame 2020 Inductee


Reading time ( words)

With over 32 years spent working with IPC, Steve Pudles was elected to the IPC’s Hall of Fame this year. Patty Goldman spoke with Steve about how he first became involved as well as his time in the organization, including his work with the EMS Management Council.

Patty Goldman: Steve, congratulations on your election into IPC’s Hall of Fame. It’s a big deal. Let’s start with a little bit of background about you, how you got involved in the industry, and how you got involved at IPC.

Steve Pudles: I started my career working for two U.S. defense contractors, and in 1985, I made a move to a company in New Jersey that built products for other companies. There was no industry at the time; it was just a business. They had to absorb some of the fixed costs from their other declining businesses. That was my entry into the EMS industry, even though we didn’t create and enable the industry until much later. I went to my first IPC meeting in 1987. I received a call from Tony Hilvers, who, at that time, was the VP of Industry Programs for IPC. He told me about this meeting that was going to take place with a bunch of companies that were in this industry and asked me if I’d be interested in attending, so I went. As they say, the rest is history.

Then, the EMS Management Council started meeting twice a year. Some of the meetings were very moderately attended. There were companies from all over the country, but some of those companies don’t exist anymore, and others have been acquired. It always tended to be small or medium EMS companies.

To read this entire interview, which appeared in Show & Tell Magazine, click here.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

IPC Standards Development: Business Challenges and an Inside View

10/28/2020 | Graham Naisbitt, Gen3 Systems
With increasing frequency, standardising the standards, such as ISO 9201, imposes certain rules that must be met to ensure “fair play” amongst the supply chain. There will be those familiar with hearing about “false positives/negatives” and “never trust the salesman,” so mitigating these is no easy task. However, there is the chance for each 5-30 Task Group to review industry requirements and set out the work program for the ensuing period. With that in mind, much of what follows is based on comments we learn about from our industry around the world, many of whom are not yet IPC members. Yes, this is a membership recruitment drive, unashamedly, as well as a search for volunteers willing to help create the standards of tomorrow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.



Copyright © 2020 I-Connect007. All rights reserved.