Mentor Video: What You Need to Know About Rigid-Flex Design


Reading time ( words)

Rigid-flex technology is one of the fastest-growing areas in electronics product design.

From smart devices to sensors, to automotive and beyond, rigid-flex is now used in nearly every industry. Why? Because rigid-flex technology empowers electronics companies to meet today’s most challenging environment and form-factor requirements. Rigid-flex not only lets you create designs that are smaller, thinner and lighter, it improves product performance and reliability by eliminating mechanical connectors and cables.

This on-demand webinar will show you how PADS Professional's rigid-flex technology simplifies the rigid-flex design process, from stack-up definition through to manufacturing hand-off. The presenters are Technical Marketing Engineering Manager John McMillan and Technical Marketing Engineer Brent Klingforth, both of Mentor, a Siemens business.

What you will learn:

• Requirements for flex design
• When and where arced structures are required
• How to design a proper stack-up
• Automation specific to flex design

To watch this video, click here.

Share

Print


Suggested Items

Meet Eran Navick, I-Connect007 Columnist

01/31/2020 | I-Connect007 Editorial Team
Meet Eran Navick, one of I-Connect007’s newest columnists! In his columns, Eran will discuss technology around the world, touching on all aspects of PCB technology, especially high technology. Eran has been in the PCB business for over 25 years and held key positions in PCB companies, including as a PCB designer and applications engineer.

Communication, Part 6: The Importance of Technology Fit

11/08/2019 | Steve Williams, The Right Approach Consulting LLC
In the final installment of this series on how PCB fabricators and designers can better communicate, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits discuss the importance of “technology fit” and how this concept impacts the synergy of the two parties involved.

Words of Advice: Making Life Easier for Fabrication and Assembly

10/17/2019 | Andy Shaughnessy, Design007 Magazine
In a recent survey, we asked the following question: What steps do you take to make the job easier for your fabrication and assembly providers? Here are a few of the answers, edited slightly for clarity.



Copyright © 2020 I-Connect007. All rights reserved.