EDA Industry Revenue Up 16.3% in 1Q19


Reading time ( words)

The electronic system design (ESD) Alliance Market Statistics Service (MSS) today announced that the electronic design automation (EDA) industry revenue increased 16.3% for Q1 2019 to $2606.4 million, compared to $2241 million in Q1 2018. The four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 6.1%.

“The EDA industry overall reported double digit increased revenue in Q1 compared to Q1 2018, with all categories, except services, reporting double digit increases,” said Walden C. Rhines, CEO Emeritus of Mentor, a Siemens Business and member of the ESD Alliance Governing Council. “Geographically, all major regions reported an increase in growth for the four-quarters moving average, all but North America reported sequential growth, and all but Japan reported year-over-year quarterly growth.”

Companies that were tracked employed 43,500 professionals in Q1 2019, an increase of 5.8% compared to the 41,110 employed in Q1 2018, and up 1.7% compared to Q4 2018.

Revenue by Product Category

Computer Aided Engineering (CAE) generated revenue of $840.7 million in Q1 2019, which represents a 20.2% increase compared to Q1 2018, the second highest year over year growth record in history. The four-quarters moving average for CAE increased 11.7%.

IC physical design and verification revenue was $557.4 million in Q1 2019, a 17.9% increase compared to Q1 2018. The four-quarters moving average increased 3.7%.

Printed circuit board and multi-chip module (PCB & MCM) revenue of $224.1 million for Q1 2019 represents an increase of 15.9% compared to Q1 2018. The four-quarters moving average for PCB & MCM increased 10.3%.

Semiconductor Intellectual Property (SIP) revenue totaled $876.1 million in Q1 2019, a 14.8% increase compared to Q1 2018. The four-quarters moving average increased 2.4%.

Services revenue was $108 million in Q1 2019, a decrease of 3.9% compared to Q1 2018. The four-quarters moving average decreased 2.4%. 

Revenue by Region

The Americas, EDA’s largest region, purchased $1112.8 million of EDA products and services in Q1 2019, an increase of 8.6% compared to Q1 2018. The four-quarters moving average for the Americas increased 4.3%.  

Revenue in Europe, the Middle East, and Africa (EMEA) increased 2.8% in Q1 2019 compared to Q1 2018 on revenues of $345.9 million. The EMEA four-quarters moving average increased 1.6%.

First quarter 2019 revenue from Japan decreased 1.4% to $244.7 million compared to Q1 2018. The four-quarters moving average for Japan increased 3.3%.

The Asia/Pacific (APAC) region revenue increased to $902.9 million in Q1 2019, an increase of 29% compared to the first quarter of 2018. The four-quarters moving average increased 8.4%.

About the MSS Report

The ESD Alliance Market Statistics Service reports EDA industry revenue data quarterly and is available to Alliance members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the Electronic System Design Alliance

The Electronic System Design (ESD) Alliance, a SEMI Strategic Association Partner, is the central voice to communicate and promote the value of the semiconductor design ecosystem as a vital component of the global electronics industry. As an international association of companies providing goods and services throughout the semiconductor design ecosystem, it is a forum to address technical, marketing, economic and legislative issues affecting the entire industry.

Share

Print


Suggested Items

Joe Clark Says DownStream Is Ready for More Growth in 2020

02/20/2020 | Kelly Dack, CID+, EPTAC
Joe Clark, co-founder of DownStream Technologies, gives Kelly Dack an overview of the company and their innovative product line, which serves to smooth the bumps that can occur between source design output and manufacturing line input. As Joe explains, 2019 was a great year for the company, and he expects that trend to hold through 2020.

Top 10 Most-Read Design News Stories of 2019

12/26/2019 | Andy Shaughnessy, Design007
As we move into 2020, we took a look back at the most popular Design007 news stories of the past year. Here for your enjoyment are the Top 10 most-read Design007 news items of 2019.

Why Does the PCB Industry Still Use Gerber?

11/07/2019 | Karel Tavernier, Ucamco
Every so often, I hear technologists ask why so many PCB designers still use Gerber. That is a fair question. Ucamco has over 35 years of experience in developing and supporting cutting-edge software and hardware solutions for the global PCB industry. Our customers—small, medium, and large PCB fabricators—include the electronics industry’s leading companies, and many of them have been with us for over 30 years. We are dedicated to our industry and excellence in everything we do, which includes our custodianship of the Gerber format.



Copyright © 2020 I-Connect007. All rights reserved.