-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
XNC Format: Gerber Takes Data Into the Future
May 20, 2019 | Denis Morin, Karel Tavernier, Jean-Pierre Charras, and Marius MatiocEstimated reading time: 2 minutes
Gerber is the world’s favourite data exchange format for PCB image data: it’s easy to use, crystal clear, and gives designers and engineers an unequivocal language with which to communicate with each other. And this grand old man of the PCB industry has remained at the forefront, powered by ongoing developments that add capability and functionality without ever compromising its characteristic simplicity and ease of use.
It’s the ideal solution for transferring drill data too, as can be seen from scanning the specification. And many in the PCB industry use it for just this, but the majority are still transferring their routing and drilling coordinates using NC formats. These were never designed for data transfer, and more often than not create confusion and waste time.
Some argue that Gerber files, unlike NC files, can’t be sent to a drilling machine. True enough, but PCB manufacturers never send their clients’ incoming files to their machines anyway. Instead, the data goes through the CAM process and is then altered and output as is appropriate to the manufacturer’s specific production line. For CAD, the question should not be which format is best for the machines, but rather which format is best for input into CAM. As we’ve said, this is undoubtedly Gerber.
So, why are CAD developers and their users still stuck on NC formats? It’s most likely a question of inertia or tradition. Drill information has been transferred for decades using NC formats, principally Excellon (hence the generic use of the name “Excellon” for “NC files”), that are similar to the 1985 IPC-NC349 specification. Also, there’s still a lot of legacy software out there, so NC files will likely be with us for a while.
The Problem With Existing NC Specifications
The problem is that so many NC files are of deplorable quality because the NC format was never designed as a data transfer format. It has always been a machine driver and contains all sorts of information that a drilling machine needs, but that is irrelevant and confusing for data exchange. For example, CAD software will typically ask users to specify whether routing should be achieved using nibbling or slot creation and which drill feeds and speeds are to be used. These are decisions that only the fabricator can make, and yet many CAD professionals will feel duty bound to give some sort of answer, which will inevitably be wrong.
To read this entire article, which appeared in the April 2019 issue of Design007 Magazine, click here.
Suggested Items
IPC Raymond E. Pritchard Hall of Fame Award: Pierre-Jean Albrieux
05/10/2024 | Marcy LaRont, PCB007 MagazineCongratulations to Pierre-Jean Albrieux, who received the 2024 IPC Raymond E. Pritchard Hall of Fame Award. The award is given to individuals in recognition of the highest level of achievement, extraordinary contributions, and distinguished service to IPC and toward the advancement of the industry, including helping to create a spirit of mutual esteem, respect, and recognition among members consistent with the goals and mission of IPC.
IPC Focuses on Education and Onboarding
05/09/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with Carlos Plaza, senior director of education for IPC, about expanding educational efforts in the PCB design, fabrication, and assembly segments. As Carlos explains, PCB design is a hot topic, but onboarding may be the hottest one of all.
Real Time with… IPC APEX EXPO 2024: Industry Growth, Challenges, and Technological Advancements
05/09/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Shawn DuBravac, IPC chief economist, dive into key industry topics such as growth, challenges, and technological advancements. They discuss shifts in the global competitive landscape, downstream demand, customization, and how AI is enhancing human skills. The industry outlook appears promising for both the short and long term.
Real Time with… IPC APEX EXPO 2024: The Driving World of e-Mobility with Indium
05/08/2024 | Real Time with...IPC APEX EXPOIn the competitive EV market, technology plays a crucial role facing the challenges of infrastructure. As Brian O'Leary explains, Indium's e-Mobility product suite includes proven solder and thermal management products for high reliability.
Real Time with… IPC APEX EXPO 2024: Understanding Objective Evidence in Manufacturing Processes
05/07/2024 | Real Time with...IPC APEX EXPOGraham Naisbitt explains the importance of objective evidence in manufacturing processes, debunking the common misconception that the ROSE test is a cleanliness test. He also discusses the introduction of Rev J, a requirement for measuring ionic contamination on circuit assemblies, and the challenges in accurately measuring contamination. Alternative methods like ion chromatography and the need for updating standards like the ROSE test are mentioned.