-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
In the Studio: Real Time with…IPC
January 25, 2019 | Andy Shaughnessy, I-Connect007Estimated reading time: 2 minutes
It's almost time for IPC APEX EXPO 2019 at the San Diego Convention Center, and that means another Real Time with…IPC video program bringing you interviews with the electronics industry's top movers and shakers, engineers, and managers. It's hard to believe that Real Time with…IPC has been a staple of IPC APEX EXPO since 2007.
I still remember my first Real Time with…IPC at IPC APEX EXPO 2008 in Las Vegas quite well. I had just begun doing video interviews, and to say I was a little rough is an understatement. Publisher Barry Matties had given me some training beforehand, but I was still trying to find my groove.
My first interview went along pretty well; so far, so good. Then, the engineer I was interviewing stopped talking and I couldn't think of a good follow-up question to ask. I looked around, trying to find inspiration for another question, and saw Barry raise one eyebrow at me and start smiling. We all started laughing. Finally, he said, "Don't look at me, focus on who you're interviewing."
That turned out to be good advice because an interviewer has to tune out everything except the person being interviewed, no matter where you are, and I'm usually surrounded by distractions at IPC APEX EXPO. Pick-and-place machines and vacuums always seem to be running. If we're doing a show wrap-up interview as the event is breaking down, a forklift driver will usually pull up next to us and drop a half dozen pallets. Once I tuned out the distractions, I could focus on the interview like a hunter’s gun-proofed retriever.
Then and Now
Things have certainly changed since 2008. For one thing, I’ve gotten much better at doing on-camera interviews; of course, after those first attempts, there was really nowhere to go but up.
We’ve also added a whole range of guest editors—many of them are people just like you—who conduct fantastic interviews with individuals in their segment of the industry. No matter what topic the interviewee wants to discuss, we probably have a guest editor who is familiar with that topic. Some of our guest editors have been doing Real Time with…IPC interviews for a decade, and we couldn’t do it without them.
The technology we use today is also light years ahead. In 2008, we used our big old-school camcorders that still ran on tape, and our video editing operations sometimes took well into the night. Now, we shoot interviews with digital recorders; editing is finished before the show closes each day, and most of that day’s interviews are posted on the Real Time with… site on the same day.
To read the full article, which appeared in the December 2018 issue of SMT007 Magazine, click here.
Suggested Items
Stan Rak: Elevating the Ideas and Insights of IPC's Thought Leaders Program
04/25/2024 | Stanton Rak, SF Rak CompanyAs a member of the IPC Thought Leaders Program (TLP), I am responsible for identifying knowledge-sharing opportunities that can generate ideas and insights that strengthen the IPC community as well as create a sustainable and lasting future for its members. I am delighted to highlight some of my recent contributions as a member of the TLP.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPC APEX EXPOBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.