ESD Alliance: EDA Industry Revenue Increase for Q1 2018

Reading time ( words)

The Electronic System Design (ESD) Alliance Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 7.8% for Q1 2018 to $2.3 billion, compared to $2.1 billion in Q1 2017. The four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 9.1%.

"The EDA industry continues to report growth in Q1, with increases across all product categories and regions," said Walden C. Rhines, board sponsor for the ESD Alliance MSS and president and CEO of Mentor, a Siemens Business. "The IC Physical Design & Verification and Printed Circuit Board and Multi-Chip Module categories each reported double digit increases."

Companies that were tracked employed 41,110 professionals in Q1 2018, an increase of 10.4% compared to the 37,229 employed in Q1 2017, and up 2.9% compared to Q4 2017.

The complete quarterly MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available to members of the ESD Alliance.

Revenue by Product Category

Computer Aided Engineering (CAE), generated revenue of $699.7 million in Q1 2018, which represents a 2.4% increase compared to Q1 2017. The four-quarters moving average for CAE increased 5.8%.

IC Physical Design & Verification revenue was $472.6 million in Q1 2018, a 19.3% increase compared to Q1 2017. The four-quarters moving average increased 9.1%.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $193.4 million for Q1 2018 represents an increase of 13.8% compared to Q1 2017. The four-quarters moving average for PCB & MCM increased 10.7%.

Semiconductor Intellectual Property (SIP) revenue totaled $830.7 million in Q1 2018, a 5.1% increase compared to Q1 2017. The four-quarters moving average increased 11.9%.

Services revenue was $112.5 million in Q1 2018, an increase of 9.7% compared to Q1 2017. The four-quarters moving average increased 7.7%.

Revenue by Region

The Americas, EDA's largest region, purchased $1024.4 million of EDA products and services in Q1 2018, an increase of 8.4% compared to Q1 2017. The four-quarters moving average for the Americas increased 10.6%.

Revenue in Europe, the Middle East, and Africa (EMEA) increased 12.4% in Q1 2018 compared to Q1 2017 on revenues of $336.4 million. The EMEA four-quarters moving average increased 6.7%.

First quarter 2018 revenue from Japan increased 5.8% to $248.1 million compared to Q1 2017. The four-quarters moving average for Japan increased 4.8%.

The Asia/Pacific (APAC) region revenue increased to $699.9 million in Q1 2018, an increase of 5.4% compared to the first quarter of 2017. The four-quarters moving average increased 9.6%.

About the MSS Report

The ESD Alliance Market Statistics Service reports EDA industry revenue data quarterly and is available to Alliance members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the Electronic System Design Alliance

The Electronic System Design (ESD) Alliance, an international association of companies providing goods and services throughout the semiconductor design ecosystem, is a forum to address technical, marketing, economic and legislative issues affecting the entire industry. It acts as the central voice to communicate and promote the value of the semiconductor design industry as a vital component of the global electronics industry. For more information about the ESD Alliance, click here.


Suggested Items

APCT Moves into Rigid-Flex with Cartel, Cirtech Acquisition

06/18/2018 | Andy Shaughnessy
When I spoke with APCT President Steve Robinson a year ago, he said he was interested in adding flex and rigid-flex capabilities, and working closely with designers and engineers. With the recent acquisition of Cartel and their subsidiary Cirtech, APCT now has a flex and rigidflex facility, along with military and aerospace certifications. At DesignCon 2018, I asked Steve to discuss these acquisitions and what they mean for APCT and their customers.

IPC-2581 Demo Draws a Crowd at IPC APEX EXPO

03/21/2018 | Real Time with...IPC
During IPC APEX EXPO 2018, the IPC-2581 Consortium held a demo of this open-source data transfer standard, attracting numerous designers, fabricators and assembly providers. Jim Pierce of Axiom Electronics and Bob Miklosey of Aegis Software sat down to discuss the demo and their involvement with the consortium. Axiom now charges more for designs submitted in the Gerber format.

Still Using 1980s Formats for Design Data Handoff?

03/09/2018 | Hemant Shah and Ed Acheson, Cadence Design Systems
The IPC-2581 format was created in the early 2000s with the merger of two competing formats: ODB++ and GENCAM. The new format, the brainchild of the late Dieter Bergman, languished with no adoption until 2011, when a small group of companies created the IPC-2581 Consortium with the goal of getting this open, neutral and intelligent format adopted. The consortium has been growing steadily in recent years. Its membership now includes more than 100 associate members in addition to its more than 90 corporate members.

Copyright © 2018 I-Connect007. All rights reserved.