APCT Moves into Rigid-Flex with Cartel, Cirtech Acquisition


Reading time ( words)

When I spoke with APCT President Steve Robinson a year ago, he said he was interested in adding flex and rigid-flex capabilities, and working closely with designers and engineers. With the recent acquisition of Cartel and their subsidiary Cirtech, APCT now has a flex and rigid-flex facility, along with military and aerospace certifications. At DesignCon 2018, I asked Steve to discuss these acquisitions and what they mean for APCT and their customers.

Andy Shaughnessy: Steve, good to see you again. Now, as the top guy at APCT…

Steve Robinson: I’m the head janitor. I clean up all the messes [laughs].

Shaughnessy: That’s right. Steve, give us a quick background on APCT.

Robinson: APCT was founded in 2008. It was Advanced Printed Circuits before that. This will be the 37th year of that facility and that operation. When I left Merix, I acquired this operation and we’ve been focusing on a high level of advanced technology and high engineering support for over eight years now. Business has been great, and we’ve been very fortunate. I think we picked the right market segment and the right business model that we gleaned at the time. We just had a nice start to 2018 with another acquisition.

Shaughnessy: Tell us about this acquisition.

Robinson: We acquired two business entities. First, Cartel Electronics, run by Bruce McMaster in Orange County, California is a rigid medium-to-advanced technology manufacturer, a high-mix commercial factory. Then we acquired an affiliate of theirs, Cirtech, which has a market niche: defense aerospace, military-focused, with high-level certification, and flex and rigid-flex as well. One of my charters in 2017 was to provide a solution for our customers in the flex and rigid-flex arena. And I was happy to get this deal done; we started on it in August 2017 and finally closed in January 2018. It’s nice to have the additional capacity and depth from the Cartel team, along with the additional offering of the flex and rigid-flex. The defense and aerospace certifications of Mil-P-55110 and 31032 were high-value targets, and to be honest, it was easier to acquire than it was to implement them in my current operations. So, we chose that path.

Shaughnessy: So you don’t have to train anyone...

Robinson: Yes, you don’t have to change the culture of your specific factories either. One is a high-reliability facility, a little bit more meticulous with its focus, while the other facilities are more advanced technology-focused and speed-focused. Stopping to complete 20 pages of paperwork every other day is kind of cumbersome to our task of quick turn, but both strive for high reliability.

And I’m really excited to introduce our quick-turn culture into those arenas. In the initial month, I’ve been meeting with customers, especially the flex and rigid-flex. Even in the defense and aerospace segments, the technologies are evolving very quickly, and there’s a shortage of suppliers. So when you have our established, high-reliability factory and now you introduce our advanced technology, quickturn capabilities, our meetings have been pretty eye-opening. Customers now know that they have a source that they can go to that offers a broader range of technology for them. Because they’re being pressured, the defense industry is the same as ours—smaller, thinner, lighter, faster, more economical, more affordable, and more efficient. And so that’s driving smaller, tighter lines, smaller features, everything that embraces the advanced technology space that APCT has niched itself in.

So far the feedback’s been tremendous, and the customer interest is through the roof compared to what we expected. So it’s really good. We’re really excited about it, looking forward to the rest of 2018 and working with it. As I said before, as with any acquisition, you don’t buy a company; you buy the team. I’m excited about the depth of the team, and the experience they have. Many of these people have been building printed circuit boards in their industry niche for 20–30 years, so it adds tremendous depth to APCT. It still is just people working with people, so to have a huge surplus of industry veterans is something special.

Bruce McMaster has been one of the top leaders of our industry for years, since the DDI days. John Stein is running our Cirtech operations, and he has many years in the design and manufacturing of flex and rigid-flex. I thought my team was the strongest team in the industry prior to this, so it’s really exciting for me. As CEO, my job is team building, right? I put the best players on the field and have a good game strategy, and then execute with a good team. I am about to roll the PCB Patriots into the circuit board industry.

To read the full version of this interview which appeared in the April 2018 issue of FLEX007 Magazine, click here.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/20/2023 | Andy Shaughnessy, Design007 Magazine
We’re in the middle of show season, and it certainly “shows.” Thank you very much. I’m here all week. Don’t forget to tip your wait staff. This week, we published a variety of articles, columns, and news items, and much of it centered on trade shows. Technical Editor Dan Feinberg brings us a report from CES 2023. IPC announced the winners of the Best Technical Paper awards for IPC APEX EXPO 2023. And we have an interview with Altium’s Rea Callender about the company’s educational efforts at APEX and around the globe.

Polar Instruments: Simulating PCB Potentialities

12/08/2022 | Nolan Johnson, I-Connect007
Nolan Johnson checks in with Polar’s Martyn Gaudion on the evolving needs of global PCB manufacturing markets in a post-pandemic world, where generating accurate PCB specification documentation is essential to successfully navigating today's rampant supply chain constraints. Polar has positioned itself to meet these needs through agile software product developments that allow OEMs and fabricators to simulate material interactions and end-product specifications, including in-demand features like a comprehensive "structure view" that allows users to visualize all the transmission lines on a given a PCB. Though keeping pace with the demands of a rapidly growing industry has been challenging, Polar's commitment to innovation has kept its software suite ahead of the curve.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

06/17/2022 | Andy Shaughnessy, Design007 Magazine
We’re still not officially into summer yet, but Atlanta is bringing the heat, baby! It’s hit 97 degrees a few times this week, and I now have a fan aimed right at my face. At least it’s nice and humid too. I’m glad I don’t wear make-up. And it’s been a hot week in the circuit board community. This week, Eltek reported a fire at a board shop in Israel, and Flex committed to building a 145,000-square-foor facility in Jalisco, Mexico to serve the electric and autonomous vehicle segment.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.