Show & Tell: IPC APEX EXPO 2018 is on the Books!


Reading time ( words)

I am home from another IPC APEX EXPO. I have been going to these things for more than 38 years, and I learn something each year.

I spent most of Monday attending the Design Forum, which is a set of classes specifically targeted at PCB designers. Up first was Dana Korf, an old hand at tooling and front-end engineering. He presented “Printed Circuit Board Factory 4.0,” a comprehensive program he and others are undertaking to develop a completely digital fabrication data package in a single .XML file, as outlined in Figure 1. The unfortunate truth is that less than 10% of all new orders arrive at the PCB fabricator’s facility with complete, accurate design data; most have missing or incorrect data. Another big issue is that a lot of the preliminary or front-end information is in the form of drawings and specifications that require reading and interpreting, and sometimes even further investigation, as it is often conflicting data. Dana wants all this data to be digital to drive a modern Industry 4.0 factory.

Dana went over the progress since the 1970s culminating in the current IPC-2581 standard, and additional software added to cover what the OEM is sending and what the factory needs. 

The digital modernization covered information for the BOM (ECAD and MCAD), mechanical fabrication, stackup, material requirements, impedance requirements, plating and surface finish, artwork, drawings, notes and requirements for acceptability. This information can support the requirements of the enterprise business system PLM/ERP. 

To read the full version of this article which originally appeared in the Show & Tell Magazine, click here.

Share


Suggested Items

Judy Warner: AltiumLive’s Second Year to be Even Better Than First

09/19/2018 | Andy Shaughnessy, Design007
Last year, Altium launched its AltiumLive event with shows in San Diego and Munich, Germany. This year, the event has expanded to include an extra day of classes. Altium is gearing up for the San Diego event in early October and the German show in January 2019. I recent spoke with Judy Warner, director of community engagement for Altium, about what designers should expect at both shows, and how the company can build on the success of the 2017 events going into the future.

BGA Fanout Routing Overview

09/04/2018 | Christian Keller, Altium
PCB developers are deluged with new challenges caused by increasing density and smaller components. Ball grid arrays (BGAs) create particular challenges during layout, with hundreds of connections in just a few square centimeters. Fortunately, designers now have options for addressing these issues.

Excerpt: The Printed Circuit Designer’s Guide to…Flex and Rigid-Flex Fundamentals

06/25/2018 | Dave Lackey and Anaya Vardya, American Standard Circuits
The design process is arguably the most important part of the flex circuit procurement process. The decisions made in the design process will have a lasting impact, for better or worse, throughout the manufacturing cycle. In advance of providing important details about the actual construction of the flex circuit, it is of value to provide some sort of understanding of the expected use environment for the finished product.



Copyright © 2018 I-Connect007. All rights reserved.