-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Stay Flexible!
March 21, 2017 | Patty Goldman, I-Connect007Estimated reading time: 4 minutes
Now, isn’t that the mantra we all hear today? For me, it’s Tai Chi to maintain physical flexibility. But of course, that is not what we’re here for. We’re talking flexible circuits including all the variations of same, which is why we called this issue “The Wide World of Flex.” Because the world of flex is broad—and it’s rapidly getting wider.
We just came from a dynamic IPC APEX EXPO in San Diego. Spirits and optimism were high all around. We had fun with some new video equipment in our booth; IPC celebrated its 60th anniversary; the show floor was busy and so were the conference rooms; there was a really good PCB Executive Forum; I met a bunch of new people and a few that I have been wanting to talk with over the past year.
So, as mentioned, our topic this month is flex circuitry and it is more than apropos as the flex market is going nowhere but up. As more designers learn about the versatility of flexible circuits, not just the well-known bending and flexing, but building into unusual shapes and sizes. So we have a varied lineup of articles and columns covering many different flex types.
I asked All Flex’s Dave Becker to write a lead article about the different types of flexible circuits and he did just that. We gave it the title of our topic: The Wide World of Flex. Who knew there was more to this topic than just flex and rigid-flex?
Anyone who has worked with flex circuits knows that one of the most difficult problems is handling them during fabrication and assembly. Tara Dunn of Omni PCB supplies us with many tips to help improve in this area.
Next, John Talbot of Tramonto Circuits gives us a fine article on flexible heaters, an interesting market for flex manufacturers. He explains common uses of these heaters and then gets into detail on design criteria.
ESI’s Patrick Reichel continues the ESI series on laser processing with a discussion on process development. Discussing tradeoff choices, he advocates taking the time to test, document and adjust laser processes for specific materials and constructions to build a process library that reflects your company’s business goals.
It is unusual to have two articles by the same author or company in one issue, but this next column was just too perfect to pass up. So, we have a second piece by Becker, this one on dimensional stability in flex circuits, certainly one of the most challenging aspects of flex manufacture, especially as feature sizes and tolerances continue to shrink.
Did I mention that PCB designers are learning more about designing flex? What could be more perfect than a new e-book on just that subject, which brings me to our next article. In a short interview with the authors we learn about The Printed Circuit Designer’s Guide to...Flex and Rigid-Flex Fundamentals, which published March 1. The interview includes a link for downloading your own free copy.
As one would expect, nothing in electronics ever holds still. New processes, new equipment, and new materials are constantly being developed to address new products with new performance requirements. One of those new technologies is stretchable electronics. Andy Behr of Panasonic Electronic Materials gives us a great overview of the technology and also introduces a novel stretchable thermoset material that is being developed by his company.
Switching gears, we have both a column and article on final surface finishes. First, Mike Carano, of RBP Chemical Technology, discusses corrosion resistance of two final finishes, ENIG and immersion silver, and a new development that shows promise in preserving solderability and minimizing corrosion.
Following this is a MACFEST article by Tom Jones of Heriot Watt University (UK), whose research project was carried out at Merlin Circuit Technology. The project involved using ionic liquid technology in place of other, more dangerous chemistries in the ENIPIG plating process. Several tests were performed on the final finish including solder reflow and wetting.
Bringing up the rear this month is IPC’s John Mitchell with an inspiring column on advocacy. After explaining IPC’s Global Policy Framework in some detail, he tells us what we all need to do to get involved.
You’ve heard it here before, but I’ll mention it again: One of the most important events is IPC’s IMPACT Washington, DC, this year to be held at the beginning of May (see our Events page at the back of this magazine).
There has never been a better time to get your congressperson’s ear and make our collective voice heard (numbers do count in Washington, especially those of small business owners). And, as we keep hearing, “If you’re not at the table, you’re on the menu.” I’m sure you know what that means!
So, that’s it for March. Spring is showing a few weeks early here in Pennsylvania—Punxsutawney Phil got it wrong this year. (Of course, much can happen weather-wise in the next two months.) Next month our topic is high-speed materials, certainly a critical part of the PCB puzzle as the race for more speed continues.
A special callout to Gary Ferrari, FTG Circuits, my very good friend and colleague, who received the Dieter W. Bergman IPC Fellowship Medal at this year’s IPC APEX EXPO conference in San Diego. Congratulations Gary!
Patricia Goldman is a 30+ year veteran of the PCB industry, with experience in a variety of areas, including R&D of imaging technologies, wet process engineering, and sales and marketing of PWB chemistry. Active with IPC since 1981, Goldman has chaired numerous committees and served as TAEC chairman, and is also the co-author of numerous technical papers. To contact Goldman, click here.
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.