Kelly Dack and Mike Creeden: Are We in a PCB Design Renaissance?


Reading time ( words)

During IPC APEX EXPO, Technical Editor Kelly Dack and San Diego PCB founder Mike Creeden discuss some of the trends they're seeing in the PCB design community, including a slight increase in young people becoming designers and more EEs doing design work. They also focus on the Designers Council's training and designer certification efforts, and the need for designers to get out of the office and visit a board shop once in a while. 

To watch this interview, click here.

Share


Suggested Items

Thermal Management Update with Doug Brooks

01/17/2018 | Andy Shaughnessy, PCBDesign007
I had the opportunity to talk with our contributor Doug Brooks recently. He has been doing some research on temperature effects on PCB traces over the last few years, and I wanted to check the status of his latest thermal efforts. He discussed his work with Dr. Johannes Adam, why temperature charts based on a trace in isolation are inaccurate, and how the industry remained so wrong about PCB temperatures for so long.

Mike Jouppi Discusses his Drive for Better Thermal Data

01/12/2018 | Andy Shaughnessy, PCB Design007
If you mention thermal management in a group of PCB designers and design engineers, Mike Jouppi’s name usually pops up. Mike is an engineer and founder of the Thermal Management LLC consulting firm. He spent years updating IPC’s charts on current-carrying capacity, which had been unchanged since the 1950s. I recently caught up with Mike and asked him to give us his views on the state of thermal management, as well as the tools and standards related to thermal design.

That’s Hot: Ventec’s Goodwin on Thermal Management

01/03/2018 | Patty Goldman, I-Connect007
IPC’s fall committee meetings were held in conjunction with SMTA International, as has been the case for several years now. Patty Goldman sat in on some subcommittee meetings, including one on laminates, where she met up with Ventec COO Mark Goodwin for a discussion on thermal management from a laminate supplier’s perspective.



Copyright © 2018 I-Connect007. All rights reserved.