-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Rogers’ John Coonrod on Insertion Loss
June 20, 2016 | Barry Matties, I-Connect007Estimated reading time: 7 minutes
Matties: You've talked about different manufacturing processes. How does an OEM or buyer of that technology verify this before they get into a problem situation?
Coonrod: That's a good question, actually. Because normally an OEM designs a board and sends it off for the fabricator to build it, and they put on there what they are interested in, of course, for conductor widths, what kind of finish they want and things like that. That gives the PCB fabricator a lot of room to do a lot of different things. Normally, the OEMs don't specify some of the things that I'm going to be talking about today, and in some ways I hope what I'm going to talk about will be enlightening for the OEMs, but also for the PCB fabricators too—that they need to be more aware of how they build the boards sometimes for the OEMs. I'm not sure if that really answers your question or not though... (laughs)
Matties: Well, it sounds like there's no real answer.
Coonrod: No, not really.
Matties: Other than that they can be aware of the problem. If the OEM is aware of the nature of the problem is there a specification where they can come in and say, "We want it manufactured like this"?
Coonrod: There are some cases, as you will see when I go through my presentation, where they can put a spec on things and say, "Okay, it has to be within this window," and then that takes care of the problem. In other cases it is the nature of the beast, and either the OEM has to realize that their design is going to have this wider range than they expected or they have to re-design and do something different.
Matties: Is this a prevalent problem in the industry?
Coonrod: It's a pretty big deal, I think. Really what happens is a lot of the fabricators that have been in the industry a long time have learned these lessons along the way, so they are already doing a lot of this automatically and you just don’t run into this problem with some of the really experienced people. Then, in some cases, the OEMs are doing things that they haven't tried to do before because they are pushing the limits of technology and they're trying do different things with materials and processes that haven't be done before. So every now and then when you get the right combination, unexpected things can happen.
Matties: What does a designer need to be aware of in this process?
Coonrod: What I'm going to show today is about four major topics in the PCB fabrication process that can affect the performance of the RF board. One of them is copper plating thickness, because it's very common, obviously, to plate copper through the circuit. But copper plating thickness variation, how much it varies from one circuit to another, has a pretty big role on one type of design but not as much on another type of design. So I kind of split that up today, showing that copper plating thickness is more important with some designs than in other designs.
Then there is the plated finish, which is used a lot, where they put electroless nickel immersion gold (ENIG) on copper in order to have a good reliable board for a long period of time. ENIG is a good process, but there are some things that it does that causes more insertion loss. But with certain designs it causes more insertion loss than in other designs, so that's another thing where there are certain designs that can use ENIG and not have as much loss as others. The other two topics are copper surface roughness, which is a really big topic and I’m just going to scratch the surface today, and then the last one is solder mask, and that is another topic that comes up from time to time.
Matties: It sounds like once you find the right recipe, stick with it.
Coonrod: Yes, that is true. I think that's how lots of engineers are. Once you've got something that works, don't mess with it.
Matties: But isn't that a trap?
Coonrod: It can be, yes. Especially if you are trying to deal with new technologies. A lot of times when you're breaking out a new technology you have to do something different and you have no choice but to go out on a limb. And that's kind of what some of this presentation is. I'm really sharing my learning experiences of different things I've heard and seen in the industry or helped troubleshoot, and just trying to make sure everyone is aware of these potential hazards.
Matties: John, thanks for spending time with us. I look forward to your presentation.
Coonrod: Great, thank you.
Page 2 of 2Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.