-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
March 17, 2023 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
The captive shop used to be the rule, not the exception. Until outsourcing caught on, that is. North American captive shops went the way of the dodo bird, and the PCB market hasn’t been the same since. Even R&D went out the window, or offshore, if you want to be technical about it.
But Schweitzer Engineering Laboratories (SEL) is something of a wild card. The company recently opened a new captive facility in Idaho, and the industry is paying close attention.
This week, Nolan Johnson goes deep with an interview with SEL technologists, who discuss the new facility and their plans for the future. Is the captive format the way forward for PCB manufacturing, or is this an anomaly?
We also feature an interview with designer Adam Thorvaldson, who came in second in the IPC Design Competition, and Pete Starkey’s thorough review of the ICT annual general meeting. Don’t forget to read Mark Laing’s state of the union for the EMS industry, and Kelly Dack’s twist on “The Tale of Five Monkeys,” or in this case, CAD monkeys.
Schweitzer: Building Inner Strength
Published March 15
How many captive shops are there in the U.S. now? We’re about to have one more, as Schweitzer Engineering Laboratories (SEL) ramps up production on its new captive facility in Boise, Idaho. Nolan Johnson conducted this interview with three SEL managers, who outline their plans for this state-of-the-art North American facility.
Runner-up Discusses IPC Design Competition
Published March 16
PCB designer Adam Thorvaldson had quite a run in the IPC Design Competition. He came in second place, despite being quite new to the EDA tool. But he plowed ahead and took care of business. He even came close to winning the competition. Check it out.
ICT Seminar 2023 Review: Energy, Thermals, and Assistive Technology
Published March 16
Technical Editor Pete Starkey has been busy lately—he’s our “go-to guy” for covering industry seminars in Europe. He recently attended the annual general meeting of the Institute of Circuit Technology, which culminated in Rex Rozario OBE receiving an ICT Honorary Fellowship. Among the news to come out of this event: Europe’s share of PCB production has plummeted in the last 20 years, but revenues have remained fairly stable.
The EMS ‘State of the Union'
Published March 15
Following on the heels of the presidential State of the Union address, Mark Laing of Siemens Digital Industries Software offers this SOTU of the American EMS segment. As he points out, high-mix is the watchword of the day, and EMS providers are now stocking inventory to preclude future supply chain snafus.
Target Condition: The Tale of Five CAD Monkeys
Published March 16, 2023
You may have heard “The Tale of Five Monkeys,” which deals with a handful of primates learning new behaviors through negative reinforcement. Columnist and noted folklorist Kelly Dack brings us a new twist on this story, now focusing on five PCB designers—or CAD monkeys. Grab a banana and read on!
Suggested Items
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
On the Line With… Talks With Cadence Expert on SI/PI for PCB Designers
05/02/2024 | I-Connect007In “PCB 3.0: A New Design Methodology—SI/PI for PCB Designers,” subject matter expert Brad Griffin, Cadence Design Systems, discusses how an intelligent system design methodology can move some signal and power integrity decision-making into the physical design space, offering real-time feedback.
The New Industry: Will the Growth Continue?
04/30/2024 | I-Connect007 Editorial TeamHow sustainable are the primary financial models in the United States regarding PCB fabrication shops? In this interview with economic experts Shawn DuBravac and Tom Kastner, we explore what’s happening with U.S. printed circuit board shops in today’s market, how consolidation affects the industry, and what can be done.
TTM’s High Tech Expansion and Industry Innovation
04/30/2024 | Marcy LaRont, PCB007 MagazineTom Edman has been the CEO of TTM Technologies since 2014 and has an extensive background in electronics and manufacturing. TTM is a leading global manufacturer of technology solutions, including mission systems, RF component and RF microwave microelectronics assemblies, and quick turn and advanced technology printed circuit boards.
U.S. Companies Invest Heavily in Robots
04/30/2024 | IFRManufacturing companies in the United States have invested heavily in more automation: total installations of industrial robots rose by 12% and reached 44,303 units in 2023. Number one adopter is the car industry followed by the electrical and electronics sector.