-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
PCB Designers Are Really Product Designers
February 9, 2023 | Zachariah Peterson, NWESEstimated reading time: 2 minutes
As I look back on 2022, I’m realizing that my company plays multiple roles in client projects beyond just designing circuits and PCBs. Sure, we’re primarily a PCB design company, but we also help with things that happen outside the PCB. This includes tasks like enclosure design, defining mechanical constraints, simulating electrical behavior, mating boards into larger assemblies, selecting cabling, and defining test requirements, all of which slowly creep into the standard scope of work for design projects.
The same set of tasks have crept into CAD software features, especially in the PCB design space. Both mechanical design tools and PCB design software have expanded their capabilities beyond enclosure/fixture design and board layout, respectively. Looking at some of the capabilities in a platform like Fusion 360, the MCAD side has significantly outpaced the ECAD side.
In the ECAD/EDA world, we still focus mostly on simulation and fit to enclosure, but there is so much more that goes into full-scale product development, and the ECAD software world should start to move much faster toward the goals I outline below.
What PCB Designers Need for Product Development
As I mentioned in my earlier I-Connect007 article on simulation, designers need much simpler simulation access either inside their native PCB design tool or through a direct and seamless integration with another design/simulation program1. Now that ECAD/MCAD collaboration has helped bring electrical and mechanical co-design under one roof, designers can instantly pass ECAD data into the MCAD system and vice versa.
What else can the ECAD industry do to support product design? Based on both my personal experience with client projects and current ECAD industry trends, here are some things I’d love to see.
Cable and Harness Design
This area is finally coming to fruition from my preferred EDA vendor, and I expect similar features from others. Many products, whether they are multi-board assemblies or requiring a connection to an external product, may do so with custom cables, custom or standard mated connectors, or flex ribbons.
Harness and cable definition at the logic level, visual integration into the assembly, and even physical design of custom cable assemblies—these are all essential parts of product development. The immediate benefit is in MCAD, where the connector and cable can be viewed in a larger system. However, the broader benefit is in simulation and rules checking, where logical definitions in interconnects are used to examine electrical behavior.
To read this entire article, which appeared in the January 2023 issue of Design007 Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
On the Line With… Talks With Cadence Expert on SI/PI for PCB Designers
05/02/2024 | I-Connect007In “PCB 3.0: A New Design Methodology—SI/PI for PCB Designers,” subject matter expert Brad Griffin, Cadence Design Systems, discusses how an intelligent system design methodology can move some signal and power integrity decision-making into the physical design space, offering real-time feedback.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.