-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Workflow Challenges in Fabrication
December 22, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
Q&A with Paul Cooke
The job of the PCB designer is becoming more complicated every day. Designers are now acting as what amounts to project managers for the PCB, and they must be familiar with the many trade-offs that happen during manufacturing, many of which they can control during the design cycle.
Paul Cooke, the senior director of business development for Ventec International Group, is presenting a class at IPC APEX EXPO 2023 that looks at workflow challenges in fabrication, and the myriad drivers that can affect yield, reliability, and cost. Here he discusses the details of this Professional Development course, what he hopes attendees will take away, and why designers and design engineers would benefit from this class.
Q: Paul, tell us a little about the Professional Development Course on process flow and defects you are teaching at the show.
A: I put this course together to give designers, engineers, etc., a more in-depth look at what happens to their design as it goes through the fabrication process. It looks at how the fabricator adjusts processes to meet the design intent and what happens when it goes wrong; it’s like a [IPC] 2221, 6012, 600, and 9121 course all rolled into one. It shows the complexity of the process and how designs can affect the process flow, yield, quality etc. We talk about reliability, for example, of how something like via size can be affected by aspect ratio, layer count, drill parameters, desmear, and material selection and how they would all interact with each other to affect yield, cost, and reliability.
Q: Why should someone attend your class?
A: It’s for anyone wanting to increase their knowledge of the fabrication process. It is aimed at designers and process engineers at any level. The course is designed to be interactive with a lot of questions and hopefully 30 years of knowledge transfer. Time permitting, we may get to cover some emerging technologies.
Q: This sounds like a great class for PCB designers. What are some of the trade-offs designers should be aware of that can affect yield and reliability?
A: There are many factors affecting yield, reliability, and ultimately cost. We will look at each part of the process, discussing how each can be affected, which attributes of the design have the most impact on yield improvement, and how the fabricator achieves the desired level of release.
Q: What is the most important piece of advice you would give your attendees?
A: Attend the course with a lot of questions and take a lot of notes as we will cover a mountain of information. By the end I hope they have a comprehensive knowledge of the process and learn to always talk to a field application engineer prior to setting out on a new type of design, to eliminate any changes later due to cost, capability, yield, etc.
Q: Is there anything else you’d like to add?
A: I hope they all enjoy the course, and I am always looking for feedback, good or bad, so that I can adapt and improve for future classes.
This article originally appeared in the December 2022 issue of Design007 Magazine.
Suggested Items
Würth Elektronik in United States Embarks on New Milestone with State-of-the-Art Headquarters
05/17/2024 | Wurth ElektronikWürth Elektronik in the United States, a leading manufacturer of electronic and electromechanical components as well as custom magnetics, has announced the commencement of construction on a new 70,000-square-foot headquarters. This new facility underscores the company’s commitment to innovation and grow in the electronics industry.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
Airbus Achieves Eurodrone’s Preliminary Design Review
05/16/2024 | AirbusThe Eurodrone programme has successfully performed the Preliminary Design Review (PDR). Led by Airbus Defence and Space as prime contractor, this major programme milestone has been completed with OCCAR and representatives of the four customer nations (France, Germany, Italy and Spain) in the presence of the three Major Sub-Contractors (MSC), Airbus Defence and Space Spain, Dassault Aviation and Leonardo.
A Review of the 2024 Del Mar Electronics and Manufacturing Show
05/16/2024 | Barry Matties, I-Connect007The Del Mar Electronics and Manufacturing Show (DMEMS) in Del Mar, California, recently took place at an unlikely venue: the Del Mar Fairgrounds. Doug Bodenstab, founder and show organizer, says the show covers everything in electronics manufacturing: design tools, components, base materials, training, testing, board fabrication, AI, data analytics, and more. While you can find about anything online these days, Bodenstab adds that there is no substitute for meeting people in person.
TactoTek Licenses IMSE Technology to Polestar for Sustainable Electronics Design Innovation
05/15/2024 | TactoTekPolestar, the Swedish electric performance car brand, and Finnish smart surface pioneer TactoTek, have entered a collaboration to explore integration of Injection Molded Structural Electronics (IMSE) technology into Polestar’s vehicle programs.