-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
A New Sourcing Paradigm
September 20, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
We’ve seen many changes over the past few years, and nowhere are they more evident than in the world of sourcing components. Sourcing has become one of the biggest challenges facing PCB designers and design engineers today. Gone are the days of procuring parts from a single source, and communication between stakeholders and distributors is critical.
But as we learned in a conversation with I-Connect007 columnist Kelly Dack, an EPTAC design instructor and PCB design team leader at an assembly provider in the Pacific Northwest, PCB designers can use certain layout strategies to plan for the unexpected, such as leaving extra real estate so that smaller components can be replaced by larger, readily available parts if the originals become “unobtainium.”
Here, Kelly discusses some timely sourcing ideas, why he believes industrial engineers should be involved in “right-sizing” the PCB, and why sourcing efforts must also focus on recruiting—or creating—PCB designers.
Andy Shaughnessy: Kelly, you’ve been involved with DFA issues for years. Why don’t you talk about some of the challenges you see with sourcing?
Kelly Dack: Sure. The problems we see are projects that begin as traditional projects. We have customers who come to us much like on “Shark Tank.” There’s an idea, some seed research and development has been done, the results are favorable, and they want to take the product to production. At that point, we evaluate the product to determine its feasibility for meeting the capabilities of our assembly lines. Everything is fine, just like it always is—until it’s not. That’s because with today’s rusty, knotted supply chain we are not able to source certain components. That one little thing can slow down or stop the entire project. We limp along until we can either change the design, modify it so that we can find an alternative component, or redesign the circuit so that we can use alternate components that will do the same thing.
Happy Holden: You understand design for manufacturing. Now we’re not talking about process capability; we’re talking about part availability, but that’s still manufacturing.
Dack: That is still manufacturing and sourcing, and that plays into it, Happy. A product can be totally 100% designed and look very good from a production standpoint and from a DFM standpoint. But now, when a part suddenly becomes unavailable, it could require another part to be designed in, which may not be form-fit and functionally the same, but it could still work. But now designing in this part has to be done properly so that design for manufacturability is considered. How many parts do you have to nudge? What’s the domino effect if we do manage to fit this part in?
Holden: So, we have to make a change in design so that the information is known up front and it’s not a do-over?
Dack: The problem we’re finding is that everybody is using the smaller parts, and the large parts are left over. So, if you want to find an equivalent functional part, chances are all the tiny ones have all been gobbled up, and you must be willing to buy the larger-scale parts. But how do you fit the larger-scale parts into your layout?
Shaughnessy: There are those dominoes, right?
Dack: Right. Let’s take a step back. During the shrinkage era in the ‘90s, when we were working on iterating boards down as small as they could be, I coined the term “practical packaging density plus.” The idea is that we determine an appropriate packaging density, and then once you get that dialed in, what’s wrong with adding just a little more for future design purposes or manufacturing purposes? Why do we constantly design to the minimum, tightest density?
Shaughnessy: Are you talking about adding more real estate?
Dack: It can be real estate. Packaging density has to do with the amount of real estate on a given PCB vs. the components and everything else, and all the geometries involved with the components.
To read this entire conversation, which appeared in the September 2022 issue of Design007 Magazine, click here.
Suggested Items
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Siemens Delivers New Solido IP Validation Suite
05/07/2024 | SiemensSiemens Digital Industries Software introduced Solido™ IP Validation Suite software, a comprehensive, automated signoff solution for quality assurance across all design intellectual property (IP) types, including standard cells, memories and IP blocks.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/07/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Happy’s Tech Talk #28: The Power Mesh Architecture for PCBs
05/07/2024 | Happy Holden -- Column: Happy’s Tech TalkA significant decrease in HDI substrate production cost can be achieved by reducing the number of substrate layers from conventional through-hole multilayers and microvia multilayers of eight, 10, 12 (and more), down to four. Besides reducing direct processing steps, yield will increase as defect producing operations are eliminated.
Hirose Launches Solution Partner Network to Address Changing Design Challenges
05/06/2024 | HiroseHirose, a leader in the design and manufacturing of innovative connector solutions, has established a Solution Partner Network that enables OEMs to quickly explore product design, specialty IP, and component fulfillment options that best suit their needs.