-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Survey Said: Designing Around Missing Data
June 9, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
One of the best tools we have for keeping our fingers on the pulse of the industry is the reader survey. When we want to find out what’s going on, we just ask. Fortunately, our readers are not a shy bunch of folks. They don’t mind sharing—the good, the bad, and the ugly.
In a recent survey, we asked our PCB designer readers, “What missing information or data (impedance requirements, library data, etc.) do you find yourself having to ‘design around’?”
The replies were all over the place; I don’t think any two respondents said the same thing. Here are some of more illustrative replies we received, edited slightly for clarity. Do these comments reflect what’s happening at your company?
- Those are the things that I demand before beginning.
- Usually several pieces of PCB specific data are missing or falsely specified, especially for impedance requirements.
- Provisioning for functional test. We often have to wait for the CAD office to approve new footprints, and for commodity management to approve part suppliers.
- Quite frankly, we insist that we know fairly early in process, but getting rules/feedback from vendors is very difficult. Vendors don't seem to be able to articulate their own rules or capabilities and it varies significantly per facility if they have multiple facilities.
- Impedance data—cost-effectiveness depends on the board material that is stocked by the board house. Workaround: We specify tracks and impedances, and permit board house to adjust the CAM files as needed. Assembly requirements: What's the permitted height of components close to the rails? What's the shadow area around high components? Library data is usually a non-issue: we simply don't trust outside sources for any library data.
The I-Connect007 Research Team regularly polls members of the electronics manufacturing industry on trends in the industry so we can bring you topics that you care about.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
IMI Welcomes New CEO
05/03/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI),The IMI Board of Directors announced, in a disclosure dated April 25, 2024, the appointment of Louis Sylvester Hughes, Chief Executive Officer (CEO).
Gstar Announced the Strategic Move: Groundbreaking of Silicon Wafer Factory Construction in Indonesia
05/03/2024 | PRNewswireRecently, Gstar held a groundbreaking ceremony for its silicon rod and silicon wafer factory, marking the beginning of the rapid construction phase.
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
On the Line With… Talks With Cadence Expert on SI/PI for PCB Designers
05/02/2024 | I-Connect007In “PCB 3.0: A New Design Methodology—SI/PI for PCB Designers,” subject matter expert Brad Griffin, Cadence Design Systems, discusses how an intelligent system design methodology can move some signal and power integrity decision-making into the physical design space, offering real-time feedback.