-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Light-Emitting Tattoo Engineered for the First Time
March 1, 2021 | UCLEstimated reading time: 2 minutes
Scientists at UCL and the IIT –Istituto Italiano di Tecnologia (Italian Institute of Technology) have created a temporary tattoo with light-emitting technology used in TV and smartphone screens, paving the way for a new type of “smart tattoo” with a range of potential uses.
The technology, which uses organic light-emitting diodes (OLEDs), is applied in the same way as water transfer tattoos. That is, the OLEDs are fabricated on to temporary tattoo paper and transferred to a new surface by being pressed on to it and dabbed with water.
The researchers, who described the process in a new paper in the journal Advanced Electronic Materials, say it could be combined with other tattoo electronics to, for instance emit light when an athlete is dehydrated, or when we need to get out of the sun to avoid sunburn. OLEDs could be tattooed on packaging or fruit to signal when a product has passed its expiry date or will soon become inedible, or used for fashion in the form of glowing tattoos.
Professor Franco Cacialli (UCL Physics & Astronomy), senior author of the paper, said: “The tattooable OLEDs that we have demonstrated for the first time can be made at scale and very cheaply. They can be combined with other forms of tattoo electronics for a very wide range of possible uses. These could be for fashion – for instance, providing glowing tattoos and light-emitting fingernails. In sports, they could be combined with a sweat sensor to signal dehydration.
“In healthcare they could emit light when there is a change in a patient’s condition – or, if the tattoo was turned the other way into the skin, they could potentially be combined with light-sensitive therapies to target cancer cells, for instance.
“Our proof-of-concept study is the first step. Future challenges will include encapsulating the OLEDs as much as possible to stop them from degrading quickly through contact with air, as well as integrating the device with a battery or supercapacitor.”
The OLED device the researchers developed is 2.3 micrometres thick in total (less than one 400th of a millimetre) – about a third of the length of a single red blood cell. It consists of an electroluminescent polymer (a polymer that emits light when an electric field is applied) in between electrodes. An insulating layer is placed in between the electrodes and the commercial tattoo paper.
The light-emitting polymer is 76 nanometres thick (a nanometre is a millionth of a millimetre) and was created using a technique called spin coating, where the polymer is applied to a substrate which is spun at high speed, producing an extremely thin and even layer.
Once they had built the technology, the team applied the tattooable OLEDs, which emitted green light, on to a pane of glass, a plastic bottle, an orange, and paper packaging.
Senior author Professor Virgilio Mattoli, researcher at Italian Institute of Technology said: “Tattoo electronics is a fast-growing field of research. At the Italian Institute of Technology we have previously pioneered electrodes that we have tattooed onto people’s skin that can be used to perform diagnostic tests such as electrocardiograms. The advantage of this technology is that it is low-cost, easy to apply and use, and washes off easily with soap and water.”
OLEDs were first used in a flatscreen TV 20 years ago. Among the advantages of the technology are that they can be used on flexible, bendy surfaces, and that they can be made from liquid solvents. This means they are printable, providing a cheap way to create bespoke new OLED designs.
Read the original article, here.
Suggested Items
LPKF is Ready for Increasing Demand for Glass Substrates in the Semiconductor Industry
05/13/2024 | LPKFThe semiconductor industry is shifting towards glass to package the most advanced semiconductor chips. LPKF’s mature LIDE technology is enabling that transition into this new era from ramp-up to high volume manufacturing.
Un-Jammable Quantum Tech Takes Flight to Boost UK’s Resilience Against Hostile Actors
05/13/2024 | BUSINESS WIREReal Time with… IPC APEX EXPO 2024: Modernizing a PCB Facility
05/13/2024 | Real Time with...IPC APEX EXPOAidan Salvi, chief transformation officer at Amitron, discusses modernizing the company's PCB facility including equipment selection, installation, process redefinition, staff upskilling, university engagement, and customer relationship building. Emphasizing that this is a significant endeavor not to be undertaken lightly, Aidan highlights the importance of focus, software technology use, and a step-by-step approach to modernization. He recommends caution when assessing whether to approach factory modernization as one big project or take a more measured approach to modernize in segments.
Star Wars and Disney: ‘Spinning the Script’ With Paul Bailey
05/13/2024 | I-Connect007 Editorial TeamPaul Bailey has quite a story to tell. The current vice president at AOA, and former principal concept technical director for Walt Disney Imagineering gave the opening keynote speech at IPC APEX EXPO 2024. He delved into some of the technological marvels he’s been involved with throughout his career, particularly with Star Wars: Galaxy’s Edge, the new Star Wars experience at Disneyland and Walt Disney World.
Neways Adds Saab to Its Blue-chip Customer Portfolio
05/13/2024 | NewaysNeways, the global innovator in mission-critical technology for leading semicon, connectivity and smart mobility companies, has onboarded Saab as new customer.