-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Chief Economist Dr. Shawn DuBravac Shares Industry's Financial Outlook
March 23, 2020 | I-Connect007Estimated reading time: 15 minutes
So whether we’re looking at the overall economy or even anything else—consumer spending, you name it, unemployment, and all of those will get materially worse in the second quarter. And then as we start to return to normal as businesses reopen, as we presumably have some response to this or at least, if you will, we’ve addressed the initial cause of the decline being the virus here, then you’ll start to see businesses come back, you’ll start to see consumers come back. They won’t necessarily come back to the same levels of output and consumption that they were prior to that. But because they’re coming back and because we’re measuring growth, you’ll start to see some of that recovery begin in the fourth quarter. So it depends on how you’re looking at it. Yes, we see, at least for right now, a relatively short recessionary period that will last probably from about now until the end of the third quarter or so. And then you start to see the economic recovery. But it will take some time before we return to the levels of production that we were enjoying prior to the onset of this recession.
Matties: So when you look at the current situation, what do you feel the most immediate or critical financial concern we should have in our industry?
DuBravac: Well, one of the things that we are seeing now, which is a good sign, is that the Federal Reserve is implementing a number of tools. Obviously, they cut their target interest rates early as this started to materialize into much more than just a supply shock. But they also dusted off their toolkit from the 2007 and 2009 period, and they begin to look at everything that they used then and what they could use now. And they were quick to implement some of those tools. Even this morning, the tools were expanded that they had in place. Some of these, we did not see until the eighth or ninth month of the financial crisis in 2007, 2008. Some of these were not implemented until late in 2008. And so I do see a quick response. We’re using the tools that worked well during that period.
I think those are all very good signs that remove some of the uncertainty, that we’ve seen the Fed respond very quickly, using tools that have worked in our recent past in the last recession, so that’s a good sign. What I am monitoring closely and what I talk to companies about frequently is how their lines of credit are looking. Because if you think about the lines of credit that businesses are using, often they might finance a warehouse or other equipment on any real estate, typically office buildings and in factories, warehouses tend to be financed on five-year balloons.
Every five years, they have to either refinance that loan or pay it off, and often they’re just refinancing it with the current issuer of that loan, be it a bank or someone else. What we saw during the financial crisis was that even a company that was doing well, operating fine, they were still selling product, they were able to make their payments, those loans were being called in. So when they were due at five years, they weren’t being extended. And that left businesses running to find alternative lending sources or being forced in some cases to sell this asset, sell warehouses, sell facilities. And so we watched those types of things very closely because even a company that is operating well and operating fine in this type of difficult environment could run into trouble if they have difficulties on the financing side of it.
Now a lot of what the Fed has implemented is to help address some of those things. And we haven’t heard from any companies yet that are facing these types of challenges, but I definitely am always asking about these types of things and always on the lookout for companies that might be facing any type of financial hardships as a result of this. Somebody should be checking with their bank; they should be ensuring that they have good lines of credit, that those lines of credit are secure, that they’ll be able to tap those if needed, that they’ll essentially have the liquidity that they’ll need should they run into financial constraints that are out of their control. Thus far, it looks like a lot of the manufacturers continue to operate “as normal.” And I say “as normal” in quotes.
Obviously, this is a very strong shock that we’ve seen. And from the beginning, electronics manufacturers and suppliers were impacted by this because they were having to adjust everything as new information was coming out. But at least as of last week, we were hearing from companies that they continue to operate at close to full capacity. In some instances, if they’re within the medical supply chain, they’re seeing new orders come in. Other companies report that they are ramping up production and also inventory builds just in case they run into any operating constraints or issues. For example, warehouses closing down or other things like that.
Transportation is becoming more difficult. They want to be able to turn to additional inventory that they may have on stock to be able to provides and service the sales that they have coming in.So the electronics manufacturing sector, at least for right now, seems to be intact, seems to be operating at close to full capacity here in North America. And what we’re hearing from Asia is that things have quickly come back online and by the end of the month they’ll be at or very near full capacity as well.
Matties: And if that’s any indication what’s happening in Asia, it’s kind of a model timeline for us to consider here in North America and other parts of the world.
DuBravac: I think that’s fair. I think it looks like North America and Europe, to some extent, are four to six weeks behind Asia, with respect to closures and other impacts from the spread of this virus. And so I would expect that Europe and North America would follow that similar timeline. And again, it’s never perfect. There are lots of dynamic situations that are continuing to develop and will develop over those six weeks. For example, in February, about 8% of container shipment capacity was underutilized essentially, was offline. That’s all coming back online this month and making the major container shipping companies anticipate being at full capacity in March, by the end of March. But that period in February where they weren’t at full capacity creates issues. You have the buildup of empty container cargo containers that end up building up outside of the port, or they’re left on train cars and on side rails and other things like that.Page 2 of 3
Suggested Items
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.
Arlon Electronic Materials Awarded Requalification to IPC-4101 QPL for All Polyimide Specification Sheets
04/29/2024 | IPCIPC's Validation Services Program has awarded Arlon Electronic Materials Division, an electronics material manufacturing company headquartered in Rancho Cucamonga, Calif., an IPC-4101 Qualified Products Listing (QPL) requalification for the third time.
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.