-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Orange Co. Designers Council Meeting July 18
July 3, 2019 | Scott McCurdy, Freedom CAD ServicesEstimated reading time: 1 minute
The Orange County Chapter of the IPC Designers Council will hold a “Lunch ‘n’ Learn” meeting on July 18 at JT Schmid’s Restaurant & Brewery in Anaheim.
The special guest speaker will be Julie Ellis, field application engineer with TTM. Julie will present “How Fabrication Processes Determine DFM Guidelines: A detailed look at fabrication realities to help you understand capabilities and trade-offs.”
PCB designers struggle with many challenges when planning a layout, as many factors in the fabrication process must be considered. Board shops must constantly invest in equipment and process technologies to improve their manufacturing yields as complexity grows.
Julie’s presentation will help attendees design a better PCB through a deeper understanding of major processes demonstrated in PCB101. For example, design rules are different for mechanically drilled vs. laser drilled holes, and using laser drill pad diameters for through-hole requirements may kill your project in production.
Julie will define key fabricator concerns caused by the interplay between material and process tolerances and how they stack up. The end results are minimum DFM guidelines that will generate the highest yields at the fabricator. Each fabricator’s site guidelines are established based on their unique equipment sets. The equipment sets are selected to support different technologies ranging from heavy Cu to microBGA designs.
At the end of this presentation, attendees will understand why different fab facilities have different capabilities, as well as how to identify and apply the correct design guidelines related to registration, aspect ratio and annular ring for mechanical through-hole vs. microvia blind hole, etching, plated layer vs. non-plated layer finished Cu thickness, and VIPPO (via-in-pad, plated over).
Location
JT Schmid’s Restaurant & Brewery, in the Reagan Room
2610 E. Katella Ave.
Anaheim, California 92806
(Across from the Honda Center)
Cost
The cost to attend this “Lunch ‘n’ Learn” event is $15 at the door. We are pleased to have Altium’s sponsorship to help us with the cost of the luncheon. Please RSVP no later than noon on Wednesday, July 17, so we can get a good headcount.
There are two ways to RSVP:
- Click here to RSVP
- Or email your RSVP
Thank you!
Scott McCurdy
President, IPC Designers Council, Orange County Chapter
Suggested Items
Hirose Launches Solution Partner Network to Address Changing Design Challenges
05/06/2024 | HiroseHirose, a leader in the design and manufacturing of innovative connector solutions, has established a Solution Partner Network that enables OEMs to quickly explore product design, specialty IP, and component fulfillment options that best suit their needs.
New Yorker, Major League Electronics Sign New Franchised Distribution Agreement
05/06/2024 | New Yorker Electronics Co.New Yorker Electronics, global distributor of electronic components, recently announced a new franchised distribution agreement with Major League Electronics, renowned manufacturer of interconnect products.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.