-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Walt Custer’s Market Report
June 12, 2017 | Barry Matties, I-Connect007Estimated reading time: 8 minutes
Custer: I think that a laminate price increase was a significant part of it. If you looked at the growth or sales of laminate by month versus printed wiring boards in China and Taiwan, laminate did a big spike-up, which could be price-related. But probably people heard that things were going to be in short supply, so they were out doing some ordering. I think you have to look at that data over a couple of months and not any one month to draw that conclusion.
Matties: That panel discussion on laminate was interesting, regarding competing industries for the product line that have higher margins and less demand on quality.
Custer: Sure. Where would you sell it if you could get it at a much better price for copper foil in another industry?
Matties: With less demanding customers.
Custer: Exactly.
Matties: So when you look forward for the PCB fab sector in the U.S., what’s your forecast there?
Custer: History says it’s going to be flatter or a slow contraction. It’s been declining for years at a couple of percent a year. Every once in a while we get a growth spike, but if you average it out, it hasn’t been a growth industry.
Matties: When you see the call for manufacturing back to America, political persuasions aside, one thing that you mentioned is we might be getting manufacturing back, but it’s not necessarily bringing jobs back.
Custer: Sharp and Foxconn Hon Hai are considering building a flat-panel display plant. My guess is that it’s not going to employ a lot of people. It's probably going to be a fairly automated facility, but at least it’ll be bringing some business back to the U.S.
Matties: Supply chain business, anyway.
Custer: And if Apple really assembles in the USA, it’s likely that most of the components will come from Asia, at least initially. So, yes, I think maybe the tide has turned, but I don’t think it’s going to be a boom in six months. It’s going to take time. The whole supply chain has moved to Asia, so getting it back is not just convincing Apple to assemble iPhones here. It’s a lot more than that. Final assembly based in the USA using all imported components will only be a modest step forward in bringing electronic manufacturing back to the USA.
Matties: I know you do a lot of research. Any surprises over the last year that came to you?
Custer: Well, I’ve been spending a lot of time thinking about what’s going to be the next big market drivers, because personal computer and tablet demand has flattened out.
Matties: You could say it’s automotive, but…
Custer: Yeah, certainly automotive. The electronic content in cars is going up all the time, virtual reality, augmented reality, the Internet of Things. I think that’s going to be mostly a component boom but those IoT sensors still have to be packaged and “talk” to something.
Robots…I was talking to Happy [Holden] and I said that I think robots are a two-edged sword because they’re going to automate manufacturing but they’re probably also going to put people out of jobs. His theory was, at least short-term, robots aren’t going to grow as fast as I had thought because there aren’t engineers to program those robots, so that a massive robot takeover is going to take time. And robots still aren’t as nimble as humans for a lot of things. They can do repetitive tasks but are not as flexible as humans for many applications.
There are a lot of things on the horizon. The medical electronics industry and remote surgery is a pretty exciting field.
Matties: Then the point about reliable Internet needs to be considered, too [laughs].
Custer: But a lot of these things are going to take time to develop. I think 5G is probably going to have the biggest volume impact short-term because not only are people going to go to 5G Internet connections, but 5G is also going to drive the Internet of Things. It’s going to drive autonomous cars. It’s going to drive a lot of things that rely on fast connection. It has to be very fast and very reliable, and so that will have a lot of demand.
Matties: Any final thoughts for our readers?
Custer: If anyone wants a copy of the talk I gave today you can write to walt@custerconsulting.com and I’ll send you the charts.
Matties: All right, and you also provide a news service to the industry. Tell the readers a little bit about that.
Custer: Well, I think you guys do that, too, to some extent, but my son Jon scours the world for news articles and tries to find one of each kind. I think it’s fairly good. We have a lot of people who get it. It has no ads, and then, it’s strictly news delivered six days a week. We have a cover page where you can click on each individual item, and go to a full news story.
Matties: Good, and people can subscribe to that at your website as well?
Custer: Yeah, or send us an email. You could also subscribe to all our charts and data which are downloadable from a Sharefile site, so we offer those as annual subscription products.
Matties: Walt, thanks for your talk today, and thanks for taking the time for our readers.
Custer: Thanks, Barry.
Page 2 of 2
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.