Keysight Technologies Co-Sponsors Characterization Seminar


Reading time ( words)

Keysight is co-sponsoring a free seminar with Maury Microwave to explore various interconnected topics of device characterization that form the amplifier design flow, from component to circuit to system measurement and modeling. Additional topics include pulsed IV and S-parameters for compact model extraction, load pull for model validation and measurement, amplifier design and IC stability analysis, X-parameter modeling and system-level simulations.

During the Amplifier Design Flow—From Component to Circuit to System Measurement & Modeling seminar, instructors from Keysight and Maury Microwave will provide technical instruction and measurement demonstrations. Attendees will also have the opportunity to interact with experienced applications engineers.

When
Wednesday, Sept. 23 and Wednesday, Sept. 30

Where
Sept. 23 Event: Linthicum, MD, Hilton Baltimore BWI Airport, 1739 West Nursery Road, Linthicum, MD

Sept. 30 Event: Greensboro, NC, Greensboro-High Point Marriott Airport, 1 Marriott Drive, Greensboro, NC

For more information, visit www.keysight.com/find/events

Share

Print


Suggested Items

Bridging the Simulation Tool Divide

04/12/2021 | I-Connect007 Editorial Team
Todd Westerhoff of Siemens EDA recently spoke with the I-Connect007 Editorial Team about the divide between users of high-powered enterprise simulation tools and those who need a more practical tool for everyday use, and how Siemens is working to bridge the gap. Todd also shared his views on why so many engineers do not use simulation, as well as advice for engineers just getting started with simulation tools.

Turning ‘Garbage In, Garbage Out' into ‘Good In, Good Out’

03/23/2021 | Tamara Jovanovic, Happiest Baby
In the PCB design cycle, it is so easy to unintentionally introduce “garbage” into your system. Unless you have time to extensively check everything you bring in from an external source, it is very likely that something will not match up with your design data. In the end, this means you’ll have to put more work into your design and basically reverse-engineer a part that was supposed to save you time and effort.

Cadence’s Celsius: Don’t End up Holding the Hot Potato!

12/17/2020 | Clive "Max" Maxfield, Maxfield High-Tech Consulting
I was just thinking about the party game Hot Potato. It reminded me of today’s increasingly competitive marketplace: Accurate thermal analysis must be performed, and any potential issues have to be identified and addressed as early as possible in the design cycle. Otherwise the system will run into problems, market windows will be missed, and someone will be left holding the hot potato. Trust me, you do not want to be that someone.



Copyright © 2021 I-Connect007. All rights reserved.