-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Mark Thompson's Biggest Problems With PCB Designs
July 6, 2023 | Mark Thompson, Out of the Box ManufacturingEstimated reading time: 1 minute
What are the top problems I see with PCB design? From where I sit now on the assembly side, one of my biggest concerns related to PCB design is the lack of uniform part markings on the Gerber or ODB++ data, specifically the way customers reference diodes. We would prefer either an “A” depicting the anode side or a “C” or “K” for the cathode side. Many customers simply use either a line or a dot, which requires us to contact them to clarify which side is the cathode and which side is the anode.
If a line is used to denote the cathode side, many times the silkscreen clip using the mask clearance by the fabricator wipes out most of the line, making it difficult or impossible to determine the location of the cathode side. Using a dot doesn’t really help; does a dot depict an anode or cathode? Besides, dots are typically used to denote Pin 1 designators. Please use an “A” for the anode side and a “C” or “K” for the cathode side.
Controlling Controlled Impedances
Another area that concerns me is controlled impedances. Don’t make assumptions about controlled impedances. Your goal as a PCB designer is to simulate impedance to within 10% of your goal. The fabricator should be able to take it the rest of the way since the fabricator knows its press parameters, press values, and effective Dk. Trust your chosen fabricator and use the numbers they provide you.
If you simply go online and check material PDFs for the purpose of establishing impedances yourself be aware that many of the generic spec sheets are for very thick dielectrics (.014" core and sometimes even .028" core) the Dk associated with the thicker dielectrics are higher which, if used for trace widths .005" and below will create a mismatch and the fabricator will come back with a line size that your space may not support.
Also, consider the speed. If the literature is showing 4.5 Dk at 1 Mhz, and you know this product will be running at higher speeds, such as 5,10 or even 20 Ghz, understand the Dk will be driven way down. You may be looking at something closer to 3.8 Dk at 5 Ghz and the mismatch will affect the impedance.
Mark Thompson is an engineering manager with Out of the Box Manufacturing and a longtime CAM expert.
This article appeared in the June 2023 issue of Design007 Magazine.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Precision Tools and Problem-solving With Perfect Point
05/14/2024 | Real Time with...IPC APEX EXPOIn an interview with Guest Editor Dan Beaulieu, Alex Girardot, a field applications engineer with Perfect Point, shares his experiences with precision tooling. Alex also discusses a challenging project involving thick boards and small diameter holes in which Carbonite tools with a hybrid design were used. They also discuss the trend toward smaller hole sizes.
epoxySet Launches EC-1015HP - High Temperature, Crack Resistant Epoxy Potting
05/13/2024 | epoxySetepoxySet introduces the EC-1015HP epoxy potting compound. This heat cure system is designed for temperature cycling from -55 to 180°C with significantly better crack resistance than traditional rigid epoxies. As a low viscosity encapsulant, it is used for large and small potting applications with fragile components.
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
IPC Publishes Comprehensive Strategy to Address Electronics Industry’s Global Workforce Challenge
04/10/2024 | IPCOne of the most difficult and urgent challenges facing the electronics industry is a chronic shortage of adequately skilled workers. Today, IPC unveiled an expansion of its strategy to address the workforce challenges of the U.S. electronics manufacturing industry and called on its more than 3,000 member companies to join in the effort.
UHDI Fundamentals: ASC Sponsors Ultra High Density Interconnect Symposium
03/21/2024 | Anaya Vardya, American Standard CircuitsAmerican Standard Circuits (ASC) is a major sponsor of an upcoming symposium on one of the most talked about new technologies that has come along in quite a while: ultra high density interconnect (UHDI).