Producing Diverse Designs in Concert With Manufacturing


Reading time ( words)

There is a new acronym bubbling up in the design world: DWM, which stands for “design with manufacturing.” Why is this different than design for manufacturing, or DFM? With DWM, the emphasis is on integration between the design team and the manufacturers during the design process. DWM is much more than that.

As an engineering service company, we provide design services to companies that require additional capacity to meet time-to-market objectives or technical expertise that may be beyond the experience or core competency of the company we are supporting.  

Whatever the reason, we are tasked with producing designs that meet various technical requirements, yet are cost-effective and manufacturable. We provide this service to hundreds of customers who have varying degrees of processes, tools, and manufacturing partners. Given this diversity, we have recognized the importance of designing with manufacturing to achieve the product development goals of manufacturability and technical excellence.   

Our business revolves around printed circuit board design services. We are not an OEM and we don’t develop products; therefore we start with customer-supplied data. The depth of the data varies depending upon the customer and the project, but we are receiving inputs from the customer to start the process. This is when the most important part of the process starts: communication. It’s important to understand the technical and tactical requirements. Besides the typical technical product development questions, there are several questions that we will also flush out early in the process:  

  • What are the product specifications that must be met?
  • Are there geographic or ITAR restrictions?
  • What are the projected prototype and production volumes?  
  • Do you have an approved vendor list (AVL), incumbent board fabricators, and/or contract manufacturers?
  • Does the product require RoHS compliance?
  • Do you have any single source components or custom components on your bill of materials (BOM)?
  • What is your project’s target completion date?

Addressing these questions helps identify all the DWM stakeholders so that we can begin communications to assure that we are in sync. The goal is to validate the decisions early in the design process rather than later, or during fabrication or assembly when problems are much more expensive to resolve. It is important to match the technical requirements with manufacturers whose process capabilities are well aligned with the technical requirements. 

Communication: Saving Money, Resources
For instance, receiving guidance from your PCB fabricator on laminate material options, costs, and availability issues is very beneficial. Establishing a board stackup that meets the technical requirements and is manufacturable is a prerequisite for successful high-performance or high-volume designs. 

Identifying coupon requirements, testing, panelization, thieving, and assembly rail requirements helps to streamline the PCB fabrication process and promote efficient assembly of the printed circuit board. Designing with blind and buried vias can increase the fab processing time but it may enable a PCB to be designed in fewer layers, which can more than offset the increased processing timeThis could be very significant for high-volume products. Addressing these requirements upfront enables the design to move smoothly through the fab and assembly processes.

To read this entire article, which appeared in the June 2022 issue of Design007 Magazine, click here.

Share




Suggested Items

Altimade Puts Designers and Manufacturers Together

06/24/2022 | Andy Shaughnessy, Design007 Magazine
Despite all of the talk about the need for communication between designers and manufacturers, many PCB designers still do not talk with their manufacturers for a variety of reasons. Altium and MacroFab aim to change this dynamic. In this interview, Ted Pawela, chief ecosystem officer of Altium and head of Altium’s Nexar Business Unit, and MacroFab CEO Misha Govshteyn, discuss the new Altimade manufacturing service that Altium is introducing in partnership with MacroFab. Ted and Misha provide an overview of the Altimade process, how it links designers to fabricators, assembly providers, and component distributors, and they explain how it could pave the way for true design with manufacturing, or DWM.

The Survey Said: Why Don’t You Know Your Fabricator?

06/23/2022 | I-Connect007 Editorial Team
When we want to find out what challenges our readers are facing, we just ask. And they don’t mind sharing—the good, the bad, and the ugly. In a recent survey, we asked our PCB designer readers, “Why don’t you know who is going to manufacture your boards?” Here are some of more interesting replies we received, edited slightly for clarity. Do you see yourself in these replies?

Passionate People Can Do Fantastic Things

06/09/2022 | I-Connect007 Editorial Team
Electrical engineer Marshall Massengill is the first to admit that he has a pretty sweet gig. Marshall serves as a mentor for the Zebracorns, a robotics team based at a STEM-oriented high school in North Carolina. And he’s not just a mentor: He’s also a graduate of North Carolina School of Science and Mathematics, and a former member of one of the earliest robotics teams organized by FIRST. We recently spoke with Marshall about his work with the FIRST robotics team, and what it’s like teaching PCB design to juniors and seniors in high school.



Copyright © 2022 I-Connect007. All rights reserved.