-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Survey: Reasons U.S. Electronics Manufacturers May Exit Defense Market
June 9, 2021 | IPCEstimated reading time: 2 minutes
In a new IPC industry survey and report, one-quarter (24 percent) of electronic manufacturers say the costs and burdens of compliance with the Cybersecurity Maturity Model Certification (CMMC) may force them out of the U.S. Department of Defense’s (DoD) supply chain.
The survey conducted by IPC, the global electronics manufacturing association, also finds that for many small- to medium-size businesses (SMB), the costs and burdens of CMMC compliance may outweigh the benefits of doing business with the DoD.
In addition, 33 percent of respondents say the CMMC will weaken the U.S. defense electronics industrial base, while 18 percent are unsure, highlighting the uncertainties involved. And 41 percent believe applying the CMMC clause to their suppliers will create other problems in the supply chain.
“Cybersecurity is a must for U.S. national security, but the costs and burdens of achieving CMMC compliance under the current approach will likely force many small and medium-sized manufacturers out of the DoD supply chain, negatively impacting national security,” said John Mitchell, IPC president and CEO. “The objectives of CMMC are well-intentioned, but they must not be achieved at the expense of other key aspects of supply chain health.”
Most suppliers expect and are willing to spend upwards of $50,000 on CMMC readiness, and nearly one-third (32 percent) report that it will take them one to two years to prepare to undergo CMMC assessment. However, more than half of the suppliers say implementation costs of more than $100,000 would make CMMC readiness too expensive. DoD’s own cost analysis estimated the cost of a CMMC Maturity Level 3 (ML3) certification to be more than $118,000 in the first year. This means DoD’s own estimate of CMMC compliance costs is too high for 77 percent of the IPC survey respondents.
“The Pentagon needs to take into consideration that most SMBs do not have dedicated cybersecurity personnel to achieve the prerequisites, and while many commercial electronics manufacturers have considerable business with the defense community, they themselves do not consider themselves a defense contractor,” added Mitchell.
The study’s author, cyber security expert Leslie Weinstein, says the DoD can reduce the costs and uncertainties of CMMC compliance by leveraging existing industry standards and certifications, such as IPC-1791, the electronics industry’s “Trusted Supplier” standard, which was designed in collaboration with the DoD; or the certifications offered by HITRUST or the International Standards Organization.
“The DoD recognizes a variety of respected, industry-driven certifications when it comes to hiring cybersecurity professionals,” says Weinstein. “Taking the same approach to certifying suppliers would allow companies to invest more in security than in redundant audits, and it would quickly create a pool of companies who are able to bid on DoD solicitations containing the CMMC DFARS clause. And importantly, it would prevent further erosion of the U.S. defense industrial base.”
IPC fielded the survey between February 25 and March 5, 2021 and garnered 108 responses from contract manufacturers, printed circuit board fabricators, original equipment manufacturers and suppliers who self-reported they are planning to undergo a CMMC assessment in the next five years.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).