-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Book Excerpt: Producing the Perfect Data Package
June 3, 2020 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
The following is an excerpt from Chapter 1 of Mark Thompson's I-Connect007 eBook The Printed Circuit Designer’s Guide to... Producing the Perfect Data Package. Mark is in engineering support at Prototron Circuits and a Design007 columnist.
Chapter 1: Identifying Product Board Class and Pre-Quote Software
Deciding upon the class of the final product will determine what files are needed for fabrication and assembly. It is critical to note that for a product to be built to any class level, it must be designed to that class level from its inception.
STANDARDS AND SPECIFICATIONS
Let’s review the various PCB classes as defined by IPC—Association Connecting Electronics Industries. IPC is the trade association for the electronics industry that provides standards, training and certification, market research, education, and public policy advocacy to support all facets of the industry, including design, PCB manufacturing, and electronics assembly.
First, understand that IPC has different specifications depending on the PCB type. This book will address rigid and rigid-flex PCBs. The industry standards for these PCB types are:
• IPC-6012: Qualification and Performance Specification for Rigid Printed Boards
• IPC-6013: Qualification and Performance Specification for Flexible Printed Boards
• IPC-6018: Qualification & Performance Specification for High Frequency (Microwave) Printed Boards
• IPC-6012DS: Space and Military Avionics Applications Addendum to IPC-6012D: Qualification and Performance Specification for Rigid Printed Boards
There are three different board classes as defined by IPC-6012 and IPC-6013. The appropriate class will be defined by the criticality of the product the PCB will be integrated with.
CLASSES
• Class 1 is for “general electronic products” and is the lowest reliability class. Therefore, it requires the least amount of additional information in a fabrication package to meet product reliability. For instance, a Class 1 or Class 2 PCB does not require a netlist compare, whereas Class 3 and Class 3A do require it. Thus, for a Class 1 or Class 2 part, if IPC netlists and any instructions expressing the need for a net compare are not provided, a separate netlist file is not required in the output package.
• Class 2 is for “dedicated service products” and requires a little more information to be provided, as continued performance and extended life cycle are required. Uninterrupted service is not mandatory for Class 2 PCBs. It is important to note that while a Class 2 PCB does not require an IPC netlist be provided to do a design versus exported image data comparison, it is highly recommended as part of the output package.
• Class 3 is specified for the highest reliability and continued high performance in segments where equipment failure simply cannot be tolerated, such as the medical or aerospace industries. For IPC 6012 Class 3 an IPC netlist comparison is required. Netlists typically follow IPC-D-356, IPC-D-356A, or a Mentor neutral file. Other older forms of IPC netlists can be used if a fabricator has the ability to use raw computer-aided design (CAD) data, but by far the most common formats for fabrication are the three previously mentioned.
As a fabricator, we constantly see PCBs called out as IPC-6012 Class 3 that have not been designed to meet Class 3 requirements, such as minimum annular ring or clearance. If the PCB was not designed to meet Class 3 requirements, the fabricator does not have a chance to provide the customer with a Class 3 PCB.
To download your copy of Mark Thompson’s eBook The Printed Circuit Designer’s Guide to... Producing the Perfect Data Package, click here.
To visit the I-Connect007 library and check out the entire lineup of free eBooks, click here.
Suggested Items
Absolute EMS Successfully Recertifies ISO 9001:2015 and AS9100 Standards
03/26/2024 | Absolute EMS, Inc.Absolute EMS, Inc., an award-winning EMS provider of turnkey contract manufacturing services, is proud to announce the successful recertification of its ISO 9001:2015 and AS9100 Rev D SAE International Aerospace Standards.
Arlon EMC Receives IPC-4101 QPL Recertification
03/20/2024 | Arlon Electronic MaterialsArlon Electronic Materials has successfully completed an intensive two-day recertification audit by IPC Validation Services that examined Arlon’s manufacturing processes and testing procedures to assure that they are in conformance to the requirements of IPC-4101E-WAM1, the Specification for Base Materials for Rigid and Multilayer Printed Boards.
Northrop Grumman Honors Suppliers for Excellence
03/14/2024 | Northrop GrummanNorthrop Grumman Corporation honored more than 70 suppliers for their outstanding contributions in 2023. In an annual recognition event, the companies included women-, minority- and veteran-owned small businesses as well as those operating in underdeveloped areas.
Cicor Acquires TT Electronics IoT Solutions
03/04/2024 | Cicor Technologies Ltd.The Cicor Group has signed an agreement to acquire TT Electronics IoT Solutions Ltd, with three production sites in the UK and China.
AEM, Texas Aerospace Technologies Bolster Partnership for Latin America
02/26/2024 | AEM Corp.Canadian avionics manufacturer, Anodyne Electronics Manufacturing Corp. (AEM), is pleased to announce a partnership expansion with Texas Aerospace Technologies, a subsidiary of Texas Aerospace Services, to add AEM’s new MTP136D modern panel-mount P25 VHF FM Forest Service radio to its lineup of product offerings for their Latin American customers.