-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Upcoming IPC APEX EXPO Offers Sessions on 5G
February 3, 2020 | Nolan Johnson, PCB007Estimated reading time: 4 minutes
Dave Hoover of TTM discusses the Sessions @ the Intersection set for IPC APEX EXPO 2020—specifically, the two-part session he will host around the topic of 5G and materials.
Nolan Johnson: Could you introduce the session you’re spearheading at this year’s IPC APEX EXPO?
Dave Hoover: It’s an open panel discussion where there are six laminate suppliers who have been tasked to put together a series of slides from their representing company covering 5G. 5G is defined as the fifth-generation mobile network, so we wanted them to come up with a series of slides that explain how their company supports the 5G type products that are out there, including enhanced mobile broadband, autonomous driving vehicles and airplanes, mission-critical communications, and IoT. 5G is targeted to be all around us and support everything at a very fast rate, including some new things that may or may not be discussed, such as driving down the road and having your car talk to other cars or streetlights to turn them on as you approach.
There are all kinds of new things on the horizon that 5G is going to do to make our quality of life better and safer on the roads and highways along with communication aspects. There are two panel sessions: one on February 5 from 10:30 a.m.–12:00 p.m., followed by the second one on the same day from 1:30–3:00 p.m. I’m really looking forward to it. People are going to be able to share a lot of food for thought and talk about visionary, futuristic stuff along with their products, including fiberglass, resin, and copper foils and the copper foil roughness necessary to reach some of the critical speeds on some of these new products that are going to be deployed.
Johnson: This is being presented as one of the Sessions @ the Intersection, which is a new model.
Hoover: Right. It’s going to be like an open panel discussion. Each of the speakers will have 30 minutes with some Q&A time at the end. There will probably be a lot of high-end technology conversations since it’s a brand-new, innovative topic, which is exciting.
Johnson: As far as IPC APEX EXPO attendees go, to whom is this going to appeal to most?
Hoover: 5G is going to touch every one of us somewhere. If you’re in the PCB world and understand electronics, every attendee should be curious because 5G will impact things that you personally own, including cars, cellphones, and other items. IoT goes beyond the scope of vehicles and cellphones, so it will be interesting.
Johnson: In this industry, we’ll enjoy a multifaceted interest in 5G; there are people who will be designing and manufacturing the electronics, and we will all be customers, too.
Hoover: Correct. That’s why this is such a hot topic and has sparked a lot of curiosity. Even some of the consortiums are going to be in attendance, and other panel discussions are going to cross over into the 5G world, including people from iNEMI and HDP User Group.
Johnson: What are some of the trends in 5G materials that would make this something that attendees need to see?
Hoover: The band data rate that the 5G products are going to cross over into some of the ultra-high-speed digital worlds, including RF and millimeter-wave. We’re going to see various enhancements and new products, such as fiberglass-weave styles—whether they’re flat or spread-weave glass—or even copper foil roughness, where they reduce the roughness to reduce the lock because they want products to travel at much faster data rates and will much better off. It covers the whole gamut on all the different things that are moving forward. At the same time, not only does it benefit from the 5G world, but also the digital, commercial, and military sides. It’s all part of the ultra-high-speed movement moving forward with faster data rates.
Johnson: It does touch on a lot of things. There are different materials, which may mean various thicknesses and behavior characteristics. Whether that’s environmental or something you manufacture on, many of 5G-type applications are looking to be smaller packages, portable, and environmentally robust. Especially if they’re going into automotive or aviation, they have to be very reliable; you simply cannot have field failures. And there are the current challenges and developments in soldering and solder paste development, which are all meant to meet some of the challenges presented by these smaller components at very high densities. This is playing out at the same time, and materials are right in the middle of all of that.
Hoover: They’re the backbone, holding all of this stuff together as a carrier. Designing products to be reliable and meet the data rates necessary is going to be a bit of a challenge. We’re talking with the laminate companies where they’re presenting what they bring to the table to help support this.
Johnson: As a part of the panel discussion?
Hoover: Yes.
Johnson: Cool! Who will be there?
Hoover: We have six different laminate suppliers coming to the table, including representatives from Isola, Doosan, EMC, Panasonic, TUC, and Rogers Corporation.
Johnson: These are all high caliber names in the materials market.
Hoover: They are. And these materials are all very diverse in what they do. If you’re an attendee, you may hear some crossover on the similar products that they supply material to, but each of them has some new information that will be very educational.
Johnson: The great thing about this new program, Sessions @ the Intersection, is that it’s located in a very convenient place.
Hoover: That’s true, so we hope a lot of people attend. There will be some good Q&A at the end.
Johnson: Thanks, Dave.
Hoover: Thank you.
Suggested Items
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.