Conductivity Laminate for High-frequency Applications


Reading time ( words)

During productronica 2019, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers.

In this video interview, part of the productronica coverage, the I-Connect007 team speaks with Vitali Judin, area sales director with Rogers Corporation.

Editor Pete Starkey and Vitali Judin discuss how the company has responded to demands for high thermal conductivity combined with low loss in high-power RF applications with the newly launched. The PTFE-based TC350 Plus is capable of handling temperatures above 125°C and draws upon Rogers’ long experience with the TC350 material line-up. Vitali explains that processability is greatly improved with TC350, and that many design groups have been waiting for a material like this for some time.

The productronica event is one of the world’s leading trade fairs for electronics development and production. The productronica trade fair is held on alternating years, at the Messe München in Munich, Germany. The next productronica will be held November 16-19, 2021.

Watch video below:

Share

Print


Suggested Items

Isola Releases IS550H Material

04/26/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Michael Gay of Isola and Chris Hunrath of Insulectro about the release of their new halogen-free, high-thermal reliability material, which they hope fills the gap in the market between epoxies and polyimides.

EIPC Technical Snapshot: 5G and Loss Minimisation

03/26/2021 | Pete Starkey, I-Connect007
Bringing a specialised technical area into sharp focus, this month’s topic was “5G and the understanding of loss minimisation at the PCB level,” with papers on dielectric material, copper foil, and modelling solutions. The webinar was moderated by EIPC board member Paul Waldner managing director of Multiline International Europa, who admitted that he had managed to get a haircut especially for the occasion!

Chapter 2 Excerpt from the Book ‘Thermal Management: A Fabricator's Perspective’

12/21/2020 | Anaya Vardya, American Standard Circuits
Insulated metal PCBs (IMPCB) or metal-clad PCBs (MCPCB) are a thermal management design that utilizes a layer of solid metal to dissipate the heat generated by the various components on the PCBs. When metal is attached to a PCB, the bonding material can either be thermally conductive but electrically isolative (IMPCBs or MCPCBs), or in the case of RF/microwave circuits, the bonding material may be both electrically and thermally conductive. The reason that RF designers usually have the bonding material thermally and electrically conductive is that they are using this not only as a heat sink but also as part of the ground layer. The design considerations are quite different for these different applications.



Copyright © 2021 I-Connect007. All rights reserved.