-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Insulectro and DuPont Experts Talk Flex Design
September 25, 2019 | Mike Creeden, CID+, InsulectroEstimated reading time: 2 minutes
I recently spoke with Insulectro’s Chris Hunrath and DuPont’s Steven Bowles at the DuPont Technology and Innovation Center in Sunnyvale, California. We discussed a variety of topics related to flex design, including the support structure that’s needed in flex design, the everchanging world of flex materials, and the need for working with a flex fabricator as early as possible in the flex design cycle.
Mike Creeden: Welcome, gentlemen. Today, I’m with Chris Hunrath of Insulectro, the vice president of technology, and Steven Bowles, flex circuit applications engineer at DuPont. Today, we’re visiting the DuPont Silicon Valley Technology and Innovation Center in Sunnyvale, California. This is an impressive facility.
To provide some background on myself, I’m now the technical director of design and education at Insulectro. I’m an EPTAC IPC master instructor teaching CID and CID+ programs, and I’m also the founder of San Diego PCB—a company I sold to Milwaukee Electronics Screaming Circuits in 2016.
Today’s designers and engineers are finding the need for using flex, rigid-flex, and printed electronics in all market segments. As we start approaching the next generation of electronics, materials matter. So, the IPC Designers Council Executive Board created and recommended a definition for the profession of design layout that would be published in the first page of the IPC-2200 series designer specifications. The definition explains what a designer needs to do to make revision 1 work. It has been referred to as “The Designer’s Triangle,” explaining three perspectives for success. The first perspective is DFS (designing for solvability). Truly solving HDI with micro devices as best you can by using any of the CAD tools in front of you. The next perspective for success that the designer needs to accomplish is DFP (design it for performance). As we route our circuits the copper plays a part, and the materials that exist between the copper play a significant part. I’m hoping Chris can address that. The third perspective is DFM (designing for manufacturability), and much of that is why this Technology and Innovation Center exists at DuPont. I’m hoping Steven can tell us about that because people need to be able to discover what the next step is as they consider flex design and how it can be built.
Steven, can you tell us a little bit about your background and your role at DuPont?
Steven Bowles: I’m a flex circuit applications engineer at DuPont Silicon Valley Technology Center. I’ve been with DuPont for a little over a year now. Before that, I manufactured flex, rigid, and rigid-flex circuits for about 15 years. I worked at a few different board shops, all domestically, in multiple processes and engineering positions. I’ve also participated in IPC, am a current member of over a dozen standards development groups, and chair three of them.
Creeden: Next, can you tell us about yourself, Chris?
Chris Hunrath: I’ve worked both on the fabrication side and on the supply side of the PCB industry. I started with multilayers back in 1983 and never looked back. I have been working with the supply side about two-thirds of my career and with Insulectro for the past 18 years. I work a lot with our customers, especially on the flex circuit side, by helping them select the right materials and with the processes in the fabrication of flexible circuit boards.
To read this entire interview, which appeared in the August 2019 issue of Design007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.