Mentor White Paper: IoT and the New Breed of Designers


Reading time ( words)

A new breed of designers has arrived that is leveraging inexpensive sensors to build the intelligent systems at the edge of the Internet of Things (IoT). These systems play in every space: from devices on the body, vehicles, the workplace, across the land, sea, air, and the outer reaches of space.

It’s no surprise that this new breed of designers is taking full advantage of advanced sensing technology to invent IoT devices for an unlimited market space. Who are the new breed of designers and what tools and processes do they employ to get their jobs done quickly?

This white paper presents an overview of bringing together a design flow for IoT edge device creation that includes IC design, embedded software, system exploration and documentation, and PCB design. Click here to download this white paper

Share

Print


Suggested Items

Why We Simulate

04/29/2021 | Bill Hargin, Z-zero
When Bill Hargin was cutting his teeth in high-speed PCB design some 25 years ago, speeds were slow, layer counts were low, dielectric constants and loss tangents were high, design margins were wide, copper roughness didn’t matter, and glass-weave styles didn’t matter. Dielectrics were called “FR-4” and their properties didn’t matter much. A fast PCI bus operated at just 66 MHz. Times have certainly changed.

Bridging the Simulation Tool Divide

04/12/2021 | I-Connect007 Editorial Team
Todd Westerhoff of Siemens EDA recently spoke with the I-Connect007 Editorial Team about the divide between users of high-powered enterprise simulation tools and those who need a more practical tool for everyday use, and how Siemens is working to bridge the gap. Todd also shared his views on why so many engineers do not use simulation, as well as advice for engineers just getting started with simulation tools.

Barry Olney’s High-Speed Simulation Primer

04/09/2021 | I-Connect007 Editorial Team
The I-Connect007 editorial team recently spoke with Barry Olney of iCD about simulation. Barry, a columnist for Design007 Magazine, explains why simulation tools can have such a steep learning curve, and why many design engineers are still not using simulation on complex high-speed designs.



Copyright © 2021 I-Connect007. All rights reserved.