-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 1 minute
Quiet Power: Do Not Measure PDN Noise Across Capacitors!
Some application notes will tell you that to measure the output ripple of a DC-DC converter, the best way to make the connection is to attach the probe across the top of one of the output capacitors. While there is a legitimate argument for measuring the noise this way, be aware: if you measure the noise across a capacitor, it will most likely alter the noise signature.
Take, for instance, the evaluation board shown in Figure 1. It holds a small, encapsulated step-down, non-isolated DC-DC converter--the black rectangular package in the middle of the board. I use this board in my courses to show live measurements of converter loop stability and output impedance. This is very convenient for desktop demos, because the input voltage range is a few volts, so the entire setup can be powered simply with three AA batteries. The converter can be loaded with up to 4A of current. In addition to the converter module, which contains a fully functioning DC-DC converter, the evaluation module has banana receptacles for connecting the input supply and the load, a few ceramic capacitors across the input and output terminals, jumpers for setting the output voltage, and two BNC receptacles to connect oscilloscopes.Read the full column here.Editor's Note: This column originally appeared in the February 2013 issue of The PCB Design Magazine.
More Columns from Quiet Power
Quiet Power: The Effect on SI and PI Board PerformanceQuiet Power: 3D Effects in Power Distribution Networks
Quiet Power: Noise Mitigation in Power Planes
Quiet Power: Uncompensated DC Drop in Power Distribution Networks
Quiet Power: Ask the Experts—PDN Filters
Quiet Power: Friends and Enemies in Power Distribution
Quiet Power: Be Aware of Default Values in Circuit Simulators
Quiet Power: Do You Really Need That Ferrite Bead in the PDN?