-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
A Standards-driven Design Environment
October 12, 2023 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
For this issue about standards, we interviewed Jen Kolar, VP of engineering, and Cory Grunwald, director of designer development, at Monsoon Solutions, a design bureau in Bellevue, Washington. In this conversation, Jen and Cory explain how they created the company’s internal documentation process around the requirements of IPC standards. They also discuss their onboarding system for new hires, including the standards that the new designers should become familiar with.
Andy Shaughnessy: How about if you start by discussing your protocol for new hires, and the standards that your onboarding process is built around?
Cory Grunwald: Sure. When bringing on a new designer, we have a lot of internal Monsoon documentation and standards that tend to work specifically for ourselves and our customers. If we're teaching our new designers how to do footprints, we've got our own quick reference guide on footprint creation, as well as references to IPC-7351. The designers know that if they can’t find it in our internal documentation, they can go to the IPC standard. We usually provide the quick reference guide for our documentation and a handful of good-to-know IPC specs for designers, such as IPC-7351, Generic Requirements for Surface Mount Design and Land Pattern, and IPC-2221, Generic Standard on Printed Board Design. Another standard we provide is IPC-A-600, Acceptability of Printed Boards Endorsement. It covers class 2, class 3, and what's acceptable in board production. While we don’t expect new hires to read through all the standards, we do expect them to know what’s in them and where they can go to find more detailed information.
Shaughnessy: Your internal documentation is largely based around IPC standards?
Jen Kolar: Yes, because reading through standards isn't necessarily user-friendly. So, we will have one document that includes the standard’s image and numbers, and then we can say, “Here's exactly what you're looking for.” We condense it down to what we really need to think about day to day.
To read this entire conversation, which appeared in the October 2023 issue of Design007 Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.
Stan Rak: Elevating the Ideas and Insights of IPC's Thought Leaders Program
04/25/2024 | Stanton Rak, SF Rak CompanyAs a member of the IPC Thought Leaders Program (TLP), I am responsible for identifying knowledge-sharing opportunities that can generate ideas and insights that strengthen the IPC community as well as create a sustainable and lasting future for its members. I am delighted to highlight some of my recent contributions as a member of the TLP.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.