-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
DownStream Discusses Rigid-flex and DFM Trends
May 2, 2023 | Kelly Dack, CID+, EPTACEstimated reading time: 3 minutes
I recently sat down with Joe Clark, founder, and Ray Fugitt, technical marketing manager, of DownStream Technologies to discuss trends in tool design and manufacturing, including rigid-flex design and refreshed graphical user interfaces (GUI).
Kelly Dack: Gentlemen, thanks for speaking with me. Let's talk about design for manufacturability (DFM) trends and how your tools play into these.
Joe Clark: The biggest trend that we're seeing now, and the one we're highlighting in our products, is the proliferation of rigid-flex design. It presents challenges, from documentation of multiple stackups and zones to DFM analysis. Many of our customers are asking how they use these tools to solve problems that they’re dealing with now.
Dack: Ray, tell us how this plays into DFM from the standpoint of both the designer and the manufacturer.
Ray Fugitt: Thanks. My background is in rigid, so rigid-flex has been a learning process for me. Our last two releases are dedicated to flex and rigid-flex designs. We work with some large OEMs that do rigid-flex every day. We basically borrowed the rules and challenges that they’re seeing and incorporated them into our DFM tool.
Dack: When designers are setting up DFM rules and constraints in design tools or analysis software, they often ask, “What constraints do we enter? How do we find the design and manufacturing constraints for setting the tool?” So, do they come from the board supplier or are there general specifications?
Fugitt: Funny, I thought they’d ask whether the constraints come from the design rules or the fabricator. It's not an either/or situation. Basically, with our tool, you can choose to set and run it against your own internal design rules or your fabricator’s capabilities. We actually include a real-world example of design for assembly (DFA) from an American board shop, and we include that in our software. It's a starting point and then you work from there.
Dack: Very good. And let's talk about what else you are working on now.
Fugitt: Sure. BluePrint is our documentation tool. If you think about all the documentation that goes along with doing a PCB design, our existing competition for this tool is actually all the workarounds that people have devised over the years. There's no other tool out there that does what this does. We automate the creation of PCB documentation. You bring in the design, and a lot of your documentation is done right there. Then, you just work with the rest of it.
CAM350 and DFMStream are our analysis tools. As you probably know, CAM350 has a had a long history in the PCB fabrication sector. It's grown throughout the years and has transitioned to also become a very robust and powerful analysis tool, although it still does fabrication very well. But it mainly does things like DFM, design compares, netlist compares, and other things to address common problems earlier in design chain.
We recently held a user group meeting, and it was well attended. We talked about some of its newer features, such as its more modern interface. This new GUI came around a few years ago, and we continue to evolve it. We put in a new graphic engine to make it redraw quicker. We addressed some of the more aggravating things that happen when you're using a tool like this. We've done as much as we can to make this tool a lot more powerful.
Dack: Ray, you’ve been posting a lot of helpful online videos.
Fugitt: Yes. I'm a YouTube personality. I have almost 500,000 hits on YouTube.
Dack: You are indeed! You're a social media influencer. Not quite like Elon Musk, but you influenced me, and in a good way.
Fugitt: Glad I could help.
Dack: Very good. It’s been great speaking with you gentlemen.
Clark: Thanks, Kelly. It’s always a pleasure.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.