-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
RF and Wireless Design Means Fighting Interference, Loss
April 24, 2023 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
Keysight EDA has been in the RF and microwave design industry for decades. We asked How-Siang Yap, product manager for Keysight EDA’s RF and microwave software tools, to share his thoughts on RF design tips and techniques, and how designing boards at RF speeds compares with designing PCBs at slower speeds. As he explains, much of RF design involves battling interference and loss.
How does designing PCBs for wireless communications differ from designing a traditional PCB?
The major differences in designing PCBs for wireless communications are:
- Layout of traces, vias, interconnects, and packaging must consider the electromagnetic behavior of these physical structures on wireless communication performance.
- Layout must be optimized for RF (radio frequency) sensitivity to prevent interference and noise coupling from non-wireless and digital sections by shielding, absorption, or isolation.
- Layout must consider impedance matching between components and to antennas for optimal power transfer and low noise performance. This means that trace ground reference, shape, widths, and interconnecting transitions are not arbitrary, and they must obey RF signal propagation and radiation geometries.
- Select material properties of PCB board and layer stackup arrangements to ensure minimal loss of precious RF wireless signals to optimize performance.
What sort of problems do designers face in the RF arena that they don’t see with typical PCB designs?
Based on these differences, we can see that RF PCB design is not just designing interconnecting traces to fit onto a board. We must also consider how RF signals are protected from interference from non-RF sections on the same board and propagated along RF transmission lines such as co-planar waveguides (CPW) or microstrips with careful shaping of transitions and bends to prevent signal reflection and insertion loss.
To read this entire article, which appeared in the April 2023 issue of Design007 Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.