-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Releases September Outlook Report
September 22, 2020 | IPCEstimated reading time: 3 minutes
The economy improved over the last month, but it is clear that momentum is slowing and future growth will likely be more difficult to come by.
In the United States, the rate of new COVID-19 cases has slowed somewhat, which has likely helped to reduce some uncertainty. Manufacturing sentiment moved higher again, and the outlook for new orders and production remains solid. Consumers also appear somewhat less concerned about the year ahead, though expectations remain half as favorable as they did at the start of the year. Consumer sentiment in the United States has ebbed around April’s lull but remains above the lows experienced during the last recession. However, other uncertainties remain, and business and consumer sentiment could slip in the coming months. In the United States, the outcome of November’s election will increasingly weigh on sentiment, and uncertainties around another stimulus bill will influence businesses’ investment decisions and Americans’ spending habits. Retail sales in August slowed as the end of CARES Act cash payments and pandemic unemployment payments created a headwind for consumer spending. At the same time, many areas of retail sales are above pre-pandemic levels calling into question how far retail sales can go when, employment remains depressed and purchasing power has been curtailed.
In Europe, countries began to relax their stay-at-home orders in earnest. Businesses began to reopen as consumers worked toward a new normal. But rising cases of COVID-19 could dampen the recovery. France, for example, recently reported its highest daily increase of infections since the pandemic began in mid-February.
The Organization for Economic Co-operation and Development (OECD) recently “raised” its outlook for the global economy for 2020. The OECD now says the world economy shrank by 4.5 percent, up from its June forecast of a 6 percent decline. While the economy is doing better than anticipated, it isn’t great. Only China will see positive growth in 2020 among the G20 countries.
Economies are extremely fragile right now, and any policy blunders will stymie the recovery. In the United States, there has been talk of additional fiscal stimulus but little movement forward. On the monetary front, the Federal Reserve remains committed to accommodative policy for several years, and interest rates are expected to stay near zero at least through 2023. The European Central Bank (ECB) recently announced it was leaving its policy programs unchanged, but many expect the entity will expand its bond purchase stimulus.
There is also growing concern that the expiration of some policy measures might push the economy back into contraction. In the United States, the expiration of eviction moratoriums will create a headwind. In Europe, the expiration of short-time work benefits could drive layoffs and increase the unemployment rate. Other policy measures will be dictated by economic realities yet to materialize. For example, weakness in the dollar will create a challenge for Europe in the coming year. The Euro continues to strengthen against the dollar, which will support U.S. exports but will likely hurt European exports at a time when manufacturers are working to move operating rates higher.
In both the United States and Europe, manufacturing has recovered a significant portion of ground lost to the pandemic, but most sectors remain below prepandemic levels. While manufacturing is expanding, manufacturers remain cautious. New orders and production are expanding on both continents, and backlogs are growing. This, in turn, is keeping prices firm, but manufacturers are not expanding employment, and inventories remain lean. Capital investment is likely to remain in check. Demand is anything but certain, and manufacturers are responding to an uncertain environment by trying to keep costs contained.
The initial recovery brought strong growth rates almost across the board as the economies reopened; however, as growth slows, we are likely to see a divergence in across sectors. The electronics industry continues to appear to have weathered the pandemic most favorably. Production is up in recent months and positive on a year-over-year basis in both the United States and Europe.
While downstream markets for electronics have been recovering, many are showing signs of slowing growth. The automotive industry was especially hard hit by the pandemic but recovered swiftly. Some of the pandemic-induced, pent-up demand has cleared, and now the auto industry is showing signs of a slowdown. In the last month, auto production declined from July. Sectors of the economy will likely feel a divergence in recovery as growth slows and some areas of the economy recover more fully than others.
Read the full report at ipc.org.
Suggested Items
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
North American EMS Industry Down 4% in March
04/29/2024 | IPCIPC announced the March 2024 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.31.
Real Time with… IPC APEX EXPO 2024: A Global Presence in PCB Manufacturing
04/29/2024 | Real Time with...IPC APEX EXPORob DiGiovanni, VP of sales for the Americas at STARTEAM Global, discusses the company's global presence in PCB manufacturing. As he explains, the firm operates facilities across Europe, Asia, and North America, specializing in serving contract manufacturers in the automotive and medical industries. They emphasize quality and meeting OEM standards, focusing on offshore supply and non-Chinese factories in the North American market. The company has grown through acquisitions and rebranding to offer multiple products.