-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Materials for Automotive Applications: Thermal Management Issues
July 2, 2020 | Pete Starkey, I-Connect007Estimated reading time: 7 minutes
Listing the thermal conductivities of a wide range of materials—including air at 0.024W/mK, epoxy at 0.35 W/mK, glass at 1.05 W/mK, silicon at 149 W/mK, aluminium at 250 W/mK, and copper at 400 W/mK—Morgan gave a simple example of how even a basic 1W/mK IMS material dissipated hotspots and distributed heat far more uniformly that an equivalent assembly on a standard FR-4 substrate.
At a more advanced level, Ventec continued to work closely with their customers’ engineers to analyse and model specific thermal management challenges and either select appropriate IMS materials from their product range or quickly develop bespoke IMS solutions with the exact thermal properties needed by the OEM. Morgan showed examples of modelling calculations for real applications, illustrating how Ventec’s agility had enabled OEMs to bring new designs to market with reduced development timescales.
Failure analysis was a related topic for discussion. Morgan reviewed two case histories, identified the failure mechanisms, and described how Ventec had provided technical solutions. The first was an automotive headlamp assembly that had failed electrical function test on thermal cycling, exhibiting conductor fractures and solder-joint cracking. The second was a ceramic packaged LED unit that showed similar failures, although under different test conditions. In both case studies, thermal expansion mismatch proved to be the root cause. In the first example, the problem had been resolved by selecting a low-expansion aluminium alloy; in the second, by reducing the elastic modulus of the IMS dielectric.
On the subject of test methods, there was consensus among automotive suppliers that there should be standardised test methods and conditions. The problem was that every supplier had their own methods and agreed that theirs should be the ones to be used!
Although Alun Morgan focused this presentation on materials for thermal management, he made it clear that these only represented one specialist category of Ventec’s extensive range of base material solutions for automotive electronics. And he commented that the industry, in general, was ready for a change from categorising materials based on their structure and chemistry on definitions developed in the 1960s.
Ventec was working toward grouping materials appropriate to particular industry sectors and introduced autolam—a base material solutions set specifically curated for the diverse and unique requirements of automotive applications, or in Morgan’s words, “To relieve the designer of the laborious task of scrutinising 130 IPC slash sheets to find the product they need.”
Editor’s note: To read more about thermal management, download “The Printed circuit Designer’s Guide to Thermal Mangement With Insulated Metal Substrates” by Didier Mauve and Ian Mayoh from Ventec International Group.
Page 2 of 2Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.