Global Political Turmoil Creating Uncertainties for the Industry
From where I sit, representing the interests of electronics manufacturers and related companies around the world, I regret to say that the future of our industry—while bright overall—is fraught with uncertainties, from trade policy disputes to government leadership turnovers and economic and social megatrends. IPC is working with all governments and parties to overcome these uncertainties, but there is a lot to tackle.
AI Cameras Help Park Rangers Stop Poachers
Eric Dinerstein, the director of biodiversity and wildlife solutions at the non-profit organization RESOLVE, discusses the organization’s TrailGuard AI camera—a low-cost, durable, easy-to-use, efficient, and low-power burglar alarm system for Africa’s national parks—that alerts rangers at headquarters in near real-time of intruders and potential poachers coming into the park. With the help of leading companies, Eric explains how the project came to life, including implementing artificial intelligence (AI) and a satellite modem, making it the first of its kind.
Keith Bryant on Growth in the European Market
Pete Starkey interviews Keith Bryant, chairman of the European division of the Surface Mount Technology Association (SMTA), about his view on the outlook of the industry, including growth in the European electronics manufacturing industry as well as the need for young engineers.
Meet Alfred Macha, SMT007 Columnist
Meet Alfred Macha, one of our SMT007 columnists! Macha’s columns concentrate on process validation, supply chain management, quality management systems, government contracts, FDA regulations, process controls, and more. Alfred Macha brings 20 years of senior leadership roles in quality and operations management working for Sanmina, DDi (now TTM Technologies), Anaren (now TTM Technologies), and HEI Microelectronics.
Explaining the QSFP-DD Data Center Interconnect Standard
According to Cisco’s report, most IP traffic either originates or terminates in data centers. Yet as massive as the flows between centers are becoming, the data managed within those same facilities is going even higher. All of this activity means that “hyperscale” is the word of the future. Roughly one-quarter of all servers installed in 2016 went to hyperscale facilities, but that number will grow to almost one-half by next year.
Meet Ray Prasad, SMT007 Columnist
Meet Ray Prasad, one of our SMT007 columnists! Prasad’s columns explore DFM, manufacturing processes, yield improvement, quality control, IPC standards, and much more.
The Changing Landscape
SMTAI featured two keynote speakers: Adam Steltzner, a NASA Jet Propulsion Laboratory (JPL) engineer who led the Mars Science Laboratory's Entry, Descent, and Landing (EDL) Phase for the Curiosity rover and the chief engineer for the Mars 2020 Project; and Dr. Mike Hawes, Lockheed Martin Vice President for Human Space Exploration and Orion Program Manager. The energy at both keynotes was palpable. We’re returning to extra-orbital space with human crews, and the demands of such missions drive innovation.
Koh Young Opens New North American Facility
Koh Young America recently opened its new corporate headquarters for the Americas outside of Atlanta, Georgia. I attended the open house and spoke with Joel Scutchfield, director of sales for the Americas, about the state-of-the-art facility and the benefits of relocating to the East Coast.
Juan Arango on Koh Young’s New U.S. Headquarters
At a recent open house, Managing Director Juan Arango talks about his role in the company’s transition from their Arizona facility to a new headquarters located outside of Atlanta, Georgia. Juan details many of the benefits customers can expect, including brand new spaces dedicated to customer demos as well as training.
Is Your EMS Partner Up to Speed With WEEE 'Open Scope?'
E-waste encompasses a myriad of "unseen" metals, semi-metals, and chemical compounds that are found inside circuit boards, wires, and electrical connections. If not handled correctly, chemicals—such as cadmium, barium, lithium, lead, mercury, and beryllium—can present a significant health risk through direct contact, the inhalation of toxic fumes, or the build-up of toxins in water, soil, and food products.
SMTAI 2019: To the Moon and Beyond
W. Michael Hawes, D.Sc., gave a great keynote at SMTAI 2019 titled, “To the Moon! Orion's Next Giant Leap Into Deep Space.” Dr. Mike Hawes is currently the VP for human space exploration and the Orion Program manager for Lockheed Martin. Barry Matties spoke with him afterward to discuss the technology innovations that empower the next-generation spacecraft to take astronauts to explore farther than humankind has ever ventured.
IPC Electronics Materials Forum 2019
IPC will be holding its Electronics Materials Forum 2019 from November 5–7, 2019, in Bloomington, Minnesota. The Electronics Materials Forum is a new technical conference focused on developments in materials and processes associated with advanced electronics assembly and manufacturing.
SMTAI 2019: KIC's New, Smart Factory Products
MB Allen, manager of applications and sales for KIC, and Karl Pfluke, regional sales manager, update Nolan Johnson on their new product announcement from earlier this year. They also address the company's ongoing work on smart factory products.
SMTAI 2019: Chris Bastecki on Low-temperature Solder Challenges and Products
Chris Bastecki, director of global PCB assembly at Indium Corporation, discussed challenges of low-temperature solder and the company's new product, Durafuse LT, which provides novel properties and reliability.
SMTAI 2019: Company Updates and Future J-STD-001 Changes
Nolan Johnson speaks with Graham Naisbitt, chairman and CEO of Gen3 Systems, and Andy Naisbitt, operations director, about how they just signed an agreement with a new distributor. Graham also discussed upcoming J-STD-001 changes and Gen3's shift to a more consultative customer model.
Real Time with... SMTAI 2019 Video Interviews
The SMTA International Conference and Exhibition 2019, which took place September 22–26, 2019, at the Donald E. Stephens Convention Center in Rosemont, Illinois, concluded successfully. For those of you who were not able to make it to the show, catch our video interviews with the movers and shakers of the electronics industry. We've updated our video presentation for a better experience for our users, so check it out!
SMTAI 2019: Juan Arango Discusses Koh Young America's New Headquarters
Andy Shaughnessy speaks with Juan Arango, managing director of Koh Young America, about their new corporate headquarters in Atlanta, Georgia, which is located near most of their U.S. customer base.
SMTAI 2019: Nir Benson Discusses Mentor's Challenges and Solutions
Nir Benson, business development manager at Mentor, a Siemens Business, talks with Andy Shaughnessy about his work to integrate the two companies' solutions, some of the challenges he sees, and his efforts to optimize their cloud-based systems.
Real Time with… SMTAI 2019 Slideshow
The SMTA International 2019 Conference and Exhibition closed last week on a high note. For those who were not able to attend the event, held at Stephens Convention Center in Rosemont, Illinois, the slideshow contains a selection of photos from the exhibition show floor as well as the conference.
SMTAI 2019: Lenora Clark Discusses Company Changes and Her New Role
Lenora Clark, director of autonomous driving and safety technology at MacDermid Alpha Electronics Solutions (and co-organizer for the upcoming SMTA Additive Electronics Conference), and Nolan Johnson discuss her new role, recent company reorganization, and the synergies customers are seeing.
SMTA 2019 International Awards
The SMTA International conference—held September 22–29, 2019, at the Stephens Convention Center in Rosemont, Illinois—honored industry members with awards for their contributions to the industry. I-Connect007 has compiled an unofficial list of award recipients. The official list from SMTA will be released shortly, and I-Connect007 will publish it as soon as it is available.
IPC Panel on Bottom-terminated Components
During the IPC Summer Meetings in Raleigh, North Carolina, I sat down with Tom Rovere, a materials and process engineer at Lockheed Martin in Owego, New York. We explored a panel discussion on bottom-terminated components (BTCs) that Tom participated in as well as the challenges and issues related to BTCs and the important role that designers play in that process.
Standards Through Time: Changing to Stay the Same
The use of standards has, ultimately, propelled civilization forward. As the electronics manufacturing industry works to create, revise, update, and restructure standards, it helps to take a moment to review how standards, and the process of creating them, have occurred throughout history.
Combating ESD: The Silent Assassin in Electronics Manufacturing
ESD is a constant but invisible force within electronics manufacturing that can have a powerfully detrimental impact on production yield, product and product reliability, and company profitability. And as the circuitry within electronic devices continues to get faster, smaller, and more sophisticated, their sensitivity to the effects of ESD is only likely to increase.
Meet Chris Ellis, SMT007 Columnist
Meet Chris Ellis, one of our newest SMT007 columnists! In his columns, Ellis addresses common problems that Manncorp customers have had with the in-house conversion process, and shares solutions that have worked in the past.
The Long Road to a New Standard
Graham Naisbitt, chairman and CEO of Gen3 Systems, has spent decades leading cleanliness testing standards in a number of different standards organizations like IPC, IEC, and ISO around an assortment of testing methods, such as CAF, SIR, and even introducing a new standard this year for his own testing method—process ionic contamination testing (PICT). Naisbitt breaks down his long involvement with standards and where they stand currently.
The Convergence: IPC Merging CFX With IPC-2581
Gary Carter of XPLM and Michael Ford of Aegis Software are heading a group tasked with combining the IPC-2581 standard, now referred to as Digital Product Model Exchange (DPMX), with IPC’s Connected Factory Exchange (CFX). In this interview, they discuss the benefits that can be expected when these standards are fully merged for both PCB designers and process engineers on the manufacturing floor.
To Improve the Standards Process, Get Involved
Jan Pedersen, senior technical advisor at Elmatica, and Ray Prasad, president of Ray Prasad Consultancy Group, spoke with the I-Connect007 team about the current state of PCB standards and where the process might need improvements, including the many difficulties around transparency, slow updates, limitless numbers of variations, and a variety of other topics.
How Digitalization Is Transforming the Electronics Manufacturing Industry
The rise of the "digital" supply network—such as the cloud, big data, 3D printing, augmented reality, or the internet of things (IoT)—promises to address issues such as increasing global competition, rising consumer expectations, and the increasingly complex patterns of consumer demand, by providing a greater level of transparency, innovation, and resiliency. And there is a growing belief among business strategists that the more digitalized our manufacturing supply chains can become, the greater our efficiency will be.
Solder Mask Evolves into a Truly Additive Process
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.
eSMART Factory Conference 2019, Day 2
Happy Holden continues his report on the the eSMART Factory Conference Dearborn, Michigan, with highlights from the event's second day, which includes a keynote from Brian Toleno titled "Augmented Reality: Next-Generation Computing for Front-Line Workers."
Meet Dr. Bill Cardoso, SMT007 Columnist
Dr. Bill Cardoso started his first company at age 17 in Brazil, selling it a few years later to work for the U.S. Department of Energy’s Fermi National Accelerator Laboratory, where he led research in nuclear physics to build the equipment that discovered the Higgs Boson (and the 2013 Nobel Prize in Physics). After 10 years at Fermilab, he moved from Chicago to sunny San Diego to start Creative Electron in his garage in 2008.
eSMART Factory Conference 2019, Day 1
The recent eSMART Factory Conference in June in Dearborn, Michigan, was the second annual conference on the smart factory. SMTA described it as "A technical conference with a focus on electronics manufacturing from software systems/processes to augmented reality and smart inspection." In this article, Happy Holden gives us the highlights of the conference.
IEEE’s 5G Future
Dan Feinberg speaks with Kathy Grise, IEEE Future Directions senior program director, at the AWE conference recently in San Jose, California. In this excerpt, Dan and Kathy discuss the impending impact of 5G technology and related immersive technologies, including autonomous driving, XR, AR, and VR.
Conformal Coating Processes and Trends
The I-Connect007 editorial team spoke with one of Nordson ASYMTEK’s conformal coating experts, Camille Sybert, to discuss where the coating industry is trending and, with the rise of Industry 4.0 and automation, how it is much less about providing the right applicator and more about addressing the entire conformal coating process.
Dispensing EMI Shielding Materials: An Alternative to Sputtering
Shielding electronic systems against EMI has become a hot topic. Technological advancements toward 5G standards, wireless charging of mobile electronics, in-package antenna integration, and SiP adoption are driving the need to apply more effective EMI shielding and isolation to component packages and larger modules. For conformal shielding, EMI shielding materials for exterior package surfaces have mostly been applied with a PVD process of sputtering, leveraging front-end packaging technologies to back-end packaging applications.
The Role of Parylene Conformal Coatings in Next-gen Electronics
Designers and manufacturers of electronics are under pressure to make packages smaller, lighter, and more environmentally friendly, while ensuring that their new technologies perform reliably in their operating environments. This article takes a closer look at Parylene conformal coatings and the role they can play in helping manufacturers address current and future challenges in the electronics industry.
Conformal Coating Selection: Conventional vs. Two-part
As assemblies become more densely populated, and housing/casing designs become more permeable to save weight, the use of conformal coatings is essential to protect the assembly from its operating environment and ensure acceptable reliability for the application intended, especially when operating in hostile environments.
IEEE's Future Directions Programs Target Reliability
Dan Feinberg speaks with Kathy Grise, IEEE Future Directions senior program director, at the AWE conference recently in San Jose, California. In this excerpt, Dan and Kathy discuss the importance of reliability, blockchain, recruiting younger generations, etc.
Recent Advances in X-ray Technology: SMTA Webinar Recap
Technical Editor Pete Starkey recently attended a webinar on advances in X-ray technology and its applications in the electronics industry, as presented by Keith Bryant, Chair of SMTA Europe, on behalf of SMTA India. Here are the highlights of the webinar.
Which Matters Most: Unit Cost or Total Cost of Supply?
The primary objective for any OEM is to design, manufacture, and deliver high-quality products in the most cost-effective way possible. When demand patterns change, or there is an increase in competition, it can be easy to rely on the calculation of unit cost to relieve the price pressure. But, as many manufacturers are discovering, choosing to base their outsourcing decisions purely on unit cost may not always reap the expected benefits in the long term.
How Do I Get Smart With IPC CFX? (Part 1)
Today's assembly factories are seeing the biggest challenge to face the industry in a generation, called by many the next industrial revolution. However, in essence, the challenge is a simple extrapolation of trends that have been occurring and increasing in assembly manufacturing for decades. In Part 1 of this two-part article, Michael Ford writes about the history behind the drive for automation in the SMT assembly industry and where CFX fits in.
Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 2)
In the last three to five years, there has been a resurgence of interest in the use of low melting point alloys for SMT applications. Typically, the compositions are around the eutectic bismuth-tin alloy, perhaps with additions of other elements to increase the robustness of certain alloy properties. Now, there are several new products on the market and numerous ongoing reliability projects in industry consortia.
Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 1)
Since 2006 and the implementation of the RoHS directive, the interest in bismuth-tin solder alloys—whose melting point around 140°C is very desirable because it allows for the use of lower temperature laminate materials and reduces thermal stress on sensitive components—has only increased as the industry has searched for Pb-free alternatives to the chosen standard, SAC305, which melts at considerably higher temperatures than the incumbent tin-lead alloys.
Surface Treatment Enabling Low-Temperature Soldering to Aluminum
An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low-cost LED lighting, and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits.
Failures and Reliability in Soldering
The definition of failure is "the lack of success in doing or achieving something, especially in relation to a particular activity." If the activity is concerning a soldering process, such a failure can have a downstream impact far beyond the actual solder joint. In this regard, it is first necessary to understand what constitutes a good solder joint because appearance is too often deemed a success.
Digitalization: Key to the Future of Electronics Manufacturing?
Electronics manufacturers have long relied on automation to streamline their production processes. The concept of the smart factory takes this one step further with artificial intelligence (AI), robotics, analytics, big data, and the Internet of Things (IoT) promising an even greater level of autonomy, agility, and connectivity.
Saying Yes to Opportunities: IPC’s Emerging Engineer Program Offers Career Growth for Electronics Industry Newcomers
What makes the IPC Emerging Engineer Program a premier networking and career enriching program? IPC staff spoke to Emerging Engineer Kate Stees, materials and process engineer, Lockheed Martin, about her experience in the program and why she recommends it to other engineers.
IPC SummerCom Highlights: A Government Relations Perspective
Last week, IPC hosted SummerCom, our semi-annual standards development committee meetings, in Raleigh, North Carolina. The event brought together thousands of technical experts from around the world to shape the product, manufacturing, and supply-chain standards that guide our industry.
Data: Key to Automating Right the First Time
Michael Ford, senior director of emerging industry strategy, reflects on his first two years with Aegis Software Corporation and looks to the future of the data-driven manufacturing environment. Michael shares how the CFX and data collection model can play an important role in the streamlining processes, including Industry 4.0 and the supply chain.
The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.
What Electronics Companies Need to Know About Environmental Product Requirements
The task of monitoring and complying with environmental, health and safety (EHS) rules that affect electronics companies and their products requires a watchful eye on all levels of government: local, state, national, and international.
Laserssel Brings High-speed Soldering to New Application Areas
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.
Synergy Between Smart Manufacturing and the Secure Supply Chain (Part 2)
With the trend of shortening lead-times within the material ordering process, and the frequency with which urgent orders for materials from the grey market are made, there is increased opportunity for the ingress of counterfeit materials. The situation is made far worse when a genuine shortage of materials in the supply chain occurs. The consequences of not being able to eliminate the risk of defects getting through into the market will be disastrous for individuals as well as for the company brand image, not to mention the associated costs of recovery. It is only a matter of time, unless something very significant changes.
Smart Factory Transitions Are Attainable—With a Plan
In a white paper, Zac Elliott, technical marketing engineer at Mentor, a Siemens company, outlines a structured organization for smart factory implementation. While there can be one set of challenges to overcome when building a smart factory on a greenfield site, firms restricted to pre-existing facilities face a different set of hurdles. In this interview, Elliott discusses how things have proceeded since the paper was published, and talks about strategies for smaller firms and brownfield companies.
Streamlining, but Streamlining What?
Electronics continue to grow in application areas, capabilities, and complexities. With such growth in the raw number of circuit boards being produced globally, the pressure is on to build more faster with higher quality and greater reliability. But this isn't new. What is new is the thinking and problem-solving that will need to happen at the manufacturing floor level to deliver on this coming need.
Synergy Between Smart Manufacturing and the Secure Supply Chain (Part 1)
As MRP and ERP functions follow computing trends and start to migrate into the cloud, a fundamental question is being raised as to whether these are still the right tools to use in today’s modern Industry 4.0 driven factory, or whether these need to evolve, be enhanced, or even replaced in order to meet the more extreme requirements of operational flexibility, as well as cope with volatile material availability in the market.
4 Ways Electronics Manufacturers are Growing Their Businesses in 2019
At a time when many manufacturers are struggling to remain profitable, and with the uncertainty of the Brexit negotiations still looming large, finding new ways to nurture and grow your electronics manufacturing business has never been more crucial. Yet, despite the current challenges, some EMS providers are bucking the trend with reports of sustained growth. Here is their secret.
Whizz Systems on Knowing Your Strengths and Building Customer Relationships
Located in the heart of the Silicon Valley, Whizz Systems Inc. provides electronics product design, development and manufacturing services. Muhammed Irfan, president of the company, speaks with Nolan Johnson about knowing your strengths, engaging start-ups, and building strong customer relationships through education and preparation.
Co-owner Philip Kazmierowicz on New Role as KIC President
KIC is one of the leaders in reflow and thermal process control and smart oven technologies. On March 25, 2019, KIC announced that Philip Kazmierowicz, company co-owner, would take on the position of president. Nolan Johnson took that opportunity to sit down with Kazmierowicz in his Oregon-based R&D lab to discuss KIC's history and his plans for the future of the company.
Communication and Information: Two Keys to Success
Nolan Johnson and Duane Benson, an I-Connect007 columnist and a representative from Milwaukee Electronics, discuss how assemblers can help their customers through submitting and maintaining accurate information, and engaging in open communication early and often about the highly important bill of materials.
From DataED’s NPI Center to the Manufacturing Floor
The I-Connecct007 team recently spoke with a team of technologists and managers at Data Electronic Devices (DataED). Jeff Hamlett, director of sales and marketing; Lori Giglio, general manager at the NPI Engineering Center; Vic Giglio, president and CEO; and Ron Sprizza, VP of quality for DataED, provided an overview of the importance of company culture and making your customers the first priority.
Incoming CEO Steve Pudles on the Acquisition of Zentech
Nolan Johnson talks to Steve Pudles about the recent acquisition of Zentech Manufacturing Inc. by BlackBern Partners LLC and Zentech management. Steve, also an investor in Zentech, steps in as the incoming CEO of the new organization and discusses the deal, his new role, changes to management, and the company's plans post-sale.
Five Key Questions Your EMS Partner Should Be Asking in the Supplier Selection Process
As we've continued to observe the impact of the ongoing global electronics components shortage, any challenge to the supply chain has the potential to cause major disruption. Whether you currently manage your own end-to-end electronics manufacturing, or you have opted to outsource to an EMS provider, there are five essential issues (and potential risks) to bear in mind when assessing the value and reliability of any proposed new supplier.
Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 2)
In the first part of this two-part article, Greg Smith talks about a study wherein a test vehicle was created to show transfer efficiency over a wide array of area ratios. Part 2 discusses the results of the experiment, including discussions of the different SEM results featuring the paste transfer efficiencies of each material, to better understand how the aperture wall surface smoothness compares to SMT stencil performance.
Catching up With Darrel Yarbrough of YES
Yarbrough Electronic Sales (YES) is one of the fastest growing contract manufacturers in the Southwest. As people get to know them better, they are becoming the go-to company in their area. In this interview, long-time industry veteran Darrel Yarbrough, owner of YES, provides a background about the company, its capabilities, and his outlook for the industry.
Zentech's Mission-critical Tips for Program Success
Nolan Johnson and John Vaughan, I-Connect007 columnist and VP of sales and marketing at Zentech Manufacturing, discuss how to make customer programs successful through early communication, complete design packages, and more from a company servicing mission- and life-critical industries, including military, aerospace, and medical.
IPC Asia President Phil Carmichael on China Trends
At the productronica China 2019 show in Shanghai, Barry Matties joined Phil Carmichael, president of IPC Asia, to discuss the continued growth of IPC in Asia, including the increasing emphasis on training. IPC China has grown from hosting two technical conferences five years ago to 32 in the past year. Phil also addresses current trends he’s seeing as well as trade tensions between China and the U.S.
How Electronics Manufacturers Can Reduce Their Environmental Impact
With OEMs demanding ever greater value for money from their suppliers, EMS providers can find themselves facing increasing pressure on every front. To remain competitive, there's a growing recognition of the need to continually improve, adapt, and evolve the manufacturing process.
Cadence Design Systems Takes Tensilica to CES Show Floor
While roaming the aisles of CES, I happened across a suite hosted by Cadence Design Systems. It wasn’t a booth—just a quiet presence behind walls with demonstration hardware inside. Vic Markarian, senior group director for worldwide IP licensing and sales, explains why Cadence was at CES.
Rising Stars at Rising Stars
One key takeaway at the IEEE Rising Stars Conference was the pace of the event: fast, high-energy, and whirling—just as you’d expect from young people somewhere in the transition from teenager to adult. If their individual excitement about attending was like a photon of light energy, then over the course of the weekend, those photons aligned and collimated just as they would inside a laser chamber, resulting in a unified power and energy in the conference as everyone fell into phase with each other.
Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 1)
As innovation and demand continue to drive miniaturization in electronics, manufacturers face the constant challenge of assembling smaller and smaller components with repeatable processes and high yields. Stencil printing is the first step in the PWB assembly process, and improvements to the SMT stencil can significantly improve yields, especially for more challenging miniaturized products.
Lionrock Delivers Bendable, Industrial-grade Battery Tech
David Yeung, co-founder and CEO of Lionrock Batteries, discusses previous projects—including smartwatch straps—and his collaboration with the Nano and Advanced Materials Institute (NAMI) in Hong Kong on wearable, flexible battery technology at CES 2019.
Eileen Hibbler and Jason Emes on Improving the West Penn SMTA Chapter
At the recent West Penn SMTA Expo, Eileen Hibbler, a chapter support specialist at SMTA, and Jason Emes, the current president of the West Penn SMTA Chapter, discuss ways to improve meeting attendance and develop a new slate of chapter officers.
A Working Definition of Automation
Automation in a working context means more than just automatic machinery. Machinery implies mechanization. Automation also means the system information directs and controls people, materials, and machines. This concept is also known as systemization. Therefore, automation is made up of two components: mechanization (material flow) and systemization (information flow). Find out more.
A Young Engineer’s Perspective
Jeffrey Diament, a recent Princeton University graduate and an engineering associate from sensor manufacturer Instrumems, talks about the company’s nanowire sensing platform that can measure velocity, temperature, and humidity. Being his first career job out of college, Diament discusses his experience on the hardware and manufacturing side of things and offers advice to other young professionals.
Building a Smart Factory Supply Line
I-Connect007 recently toured Victory Giant Technology (VGT) Co. Ltd. in Huizhou, China—one of China’s largest PCB producers. Currently, VGT generates about US$500 million in annual sales, and have plans to reach $1.5 billion in the coming years. Read more to find out VGT's expansion plans and strategies for growth.
IEEE Rising Stars Conference Founder: Empowering Young Professionals
Held each year in Las Vegas on the weekend preceding CES, the IEEE Rising Stars Conference is rapidly establishing itself as a model program for developing leadership, networking, and aptitude in navigating an organizational structure in technical students and young professionals. Michael Andrews, an IEEE Senior Life member, serial entrepreneur, and founder of the IEEE Rising Stars Conference, tells us more.
Industrial Cybersecurity Needs to Be in Front of Regulators
Chris Humphreys, principal at Anfield Group, a cybersecurity firm consulting with numerous industrial and infrastructure clients, discusses cybersecurity, the dynamics of regulation, and the responsibilities that manufacturers have to the greater good above and beyond simply adhering to regulation.
Top 10 Most-Read SMT007 Articles for March
Starting this month, we will take a look back at the most popular SMT007 news, articles, interviews, and columns over the past 30 days. For the month of March, these are the top 10 most-read SMT007 articles. Check them out.
Jennie Hwang: Get Ready for Disruptive Technologies
At IPC APEX EXPO 2019, Dr. Jennie S. Hwang, a columnist, author, and all-around an expert in PCB assembly, discusses some of the changes she has seen since joining the industry, and disruptive technologies that technologists we are going to have to face in the near future. Are you ready for the future?
Tom Lavoie on Career Planning and Professional Development
In this interview at the IEEE Rising Stars Conference, Tom Lavoie, a former HP D-level executive and now president of Consensia IT Partners and a certified Focal Point business coach, discusses how to help entry-level technical stars get their careers started with a plan, and experienced executives enhance their professional skills.
Smart Factories: A Shift in Thinking
The components that make up the smart factory foundation are not new, at least not at a basic technological level. Factory automation still uses PLCs, sensors, robotics, etc. But two things are quite different today: governments and key industry players across the globe are striving for cleaner, greener factories for the sake of the environment; and the 21st century allows for interconnected, multifaceted use of the data available through all these sensors and robotics.
SMTA Europe Electronics in Harsh Environments Conference 2019: A Preview
As a prelude to this year's Electronics in Harsh Environments conference, which will be held on April 2–4, 2019 in Amsterdam, Netherlands, SMTA Europe chairman Keith Bryant, supported by technical specialist Bob Willis, showcased the challenges and key issues faced by design and process engineers worldwide, in a webinar entitled "Harsh Environment Failures—Causes & Cures."
IPC Validation Services: New Programs and Updates
At the recent IPC APEX EXPO 2019 show, Randy Cherry, director of IPC Validation Services, gives Judy Warner an overview of a new IPC-1791 QML program focused on prime contractors and OEMs, and provides updates on existing programs.
2019 IPC EMS Management Meeting Wrap-up
At the recent EMS Management Meeting during IPC APEX EXPO 2019, EMS leaders gathered to discuss issues critical to EMS providers today, including supply chain issues, customer contracts, labor optimization and talent shortages. The highlight of the day was a supply chain challenges panel and discussion featuring supplier, distributor, and end-user perspectives on addressing component supply and lead time challenges.
Industry Outlook from IPC's Sharon Starr
Sharon Starr, IPC's director of market research, provides updates on the EMS and PCB industry outlook, benefits of IPC membership and participation, plans to expand the EMS statistical program, and new studies being published.
What Do You Know About Automation?
Test what you know in this 10-question automation quiz! Hint: It helps to download and read I-Connect007’s free eBook Automation and Advanced Procedures in PCB Fabrication, which provides an in-depth look at automation, computer-integrated and computer-aided manufacturing, mechanization, and chemical monitoring and control.
RTW IPC APEX EXPO 2019: Standards Updates—IPC-7093 & IPC-7530
Ray Prasad, IPC Hall of Famer and chairman for multiple committees, gives Guest Editor Joe Fjelstad an update on two IPC standards: IPC-7093 on bottom-termination components (BTCs), and IPC-7530 progress with reflow characterization. Prasad talks about the many challenges in dealing with BTCs, including circuit/board design, manufacturing, voiding, connections (or lack thereof), warpage, and reliability. He also addresses no-clean flux and its challenges.
Nate Ramanathan on Choosing a Prototype Partner and Production Supplier
AEye, a developer of perception systems for autonomous vehicles, has transitioned from initial engineering development into the final design for production and manufacturing of very large quantities. In an interview with I-Connect007, Nate Ramanathan, VP of operations at AEye, speaks about the criteria and his perspective on selecting vendors.
RTW IPC APEX EXPO 2019: Reducing Voiding in Reflow Soldering
Chris Nash, product manager for PCB assembly solder paste at Indium Corporation, speaks with Kelly Dack and highlights Indium’s take on three important aspects of reliability: thermal, mechanical, and electrical. He talks about challenges of all three aspects, which include solder voiding, and how Indium helps the industry address these issues through its solder paste formulations.
Two Full CFX Demo Lines at IPC APEX EXPO 2019
During IPC APEX EXPO, Editor Dan Feinberg spoke with David Bergman, IPC VP of standards and technology, about CFX, IPC’s Connected Factory Exchange software for machine-to-machine communication. With more than companies now supporting CFX, IPC set up two full lines for demonstration at the show.
RTW IPC APEX EXPO 2019: MIRTEC Discusses Automation, CFX, and Sales Success
MIRTEC President Brian D'Amico speaks with I-Connect007 Guest Editor Dan Beaulieu about automation, the Connected Factory Exchange (CFX) standard, and their banner year last year. He speaks about Industry 4.0, automating the inspection process, and collecting more data to help refine the manufacturing process.
RTW IPC APEX EXPO 2019: Advanced 3D Solder Paste Inspection Technology
Olivier Pirou, managing director of Vi TECHNOLOGY, provides Joe Fjelstad with an overview of the company's advanced 3D solder paste inspection technology, featuring the ability to make corrections in real time. Pirou also talks about their efforts in strengthening their inspection systems.
RTW IPC APEX EXPO 2019: BTU Discusses New Solder Flux Reclamation Solutions
Bob Bouchard, corporate marketing manager at BTU International Inc., updates I-Connect007 Managing Editor Nolan Johnson on new solder flux reclamation solutions and details the new aqueous scrub methodologies, their increased ROI and efficiencies, and reduced maintenance.
Executive Forum on Advancing Automotive Electronics
Presented by IPC Hall of Fame Council, the Executive Form on Advancing Automotive Electronics, which aims to provide information on the complete supply chain for automotive electronics, featured 10 presentations on all facets of automotive electronics from materials, fabrication, and reliability testing to market information and future needs.
RTW IPC APEX EXPO 2019: Making Components Count
VJ Electronix is filling the void in pre-build component count verification challenges. Don Naugler, president and general manager, sits down with Guest Editor Kelly Dack to explain details of the machine, how it works, and who benefits from it.
RTW IPC APEX EXPO 2019: LPKF on Benefits of Laser Depaneling
Laser technology marches on, and marching along with it is LPKF's new line of laser depaneling equipment. Stephan Schmidt, president, talks with I-Connect007 Guest Editor Kelly Dack about the many benefits of using lasers including cleanliness and higher yields through increased array density.
RTW IPC APEX EXPO 2019: Lenthor Discusses Facility Expansion and New Equipment
Rich Clemente, general manager of Lenthor Engineering, discusses with Dan Feinberg, I-Connect007 Guest Editor, the company’s expansion and new facility and equipment. He also talks about his outlook for the electronics manufacturing industry in North America.
RTW IPC APEX EXPO 2019: MacDermid Alpha Highlights Solutions to Combat Voids in Solder
Joe Fjelstad speaks with Paul Salerno, global portfolio manager at MacDermid Alpha Electronics Solutions, about their latest product and process solutions to combat voids in solder including modifications in pastes, preforms, and vacuum assist soldering.
RTW IPC APEX EXPO 2019: Comet Group's Lab One Facility in Silicon Valley
Joe Fjelstad speaks with Ken Burden, senior director of North American field service, and Craig Arcuri, business development, about Comet Group’s Silicon Valley-based Lab One customer center, which is a key resource for a variety of testing and inspection services, and also offers opportunities to collaborate with Comet Group's industry experts.
Award-winning Koh Young Process Optimizer
Joel Scutchfield, sales director with Koh Young America, discusses the company's outlook and new product offerings for 2019, including their Koh Young Process Optimizer (KPO), which won an award at IPC APEX EXPO 2019 for the process control software category.
RTW IPC APEX EXPO 2019: Panasonic Highlights New Products, IPC STEM Student Outreach Program
Sean M. Murray, GM of North American Sales EAG Group for Panasonic, and Nolan Johnson, I-Connect007 Managing Editor, discuss two new product announcements at the show—PanaCIM process tracker software and MPM-WX—and being a sponsor for the IPC STEM Student Outreach Program.
Super Dry Storage Options to Manage Intermetallic Growth
Guest Editor Kelly Dack speaks with Richard Heimsch, director of Super Dry, about some of the differences between storing components and other materials for assembly floor storage versus long-term storage, and how Super Dry can help combat intermetallic growth.
RTW IPC APEX EXPO: Zentech on the Fourth Pillar of DoD Acquisitions, and NIST
Steve Williams speaks with John Vaughan, VP of sales and marketing for Zentech, about their dominance in the military/aerospace market sector, the new "fourth pillar of DoD acquisitions," and how companies that do not take the NIST initiative seriously will be quickly left behind.
Supply Chain in Crisis
In a traditional design flow, the project team tends to use the parts they already know and have footprints for—maybe a little long in the tooth, but known quantities, after all. Except these are not traditional times. Component supplies, prices, and lead times are in a great deal of turmoil. The automotive, IoT, and telecommunications sectors are vacuuming components out of the supply chain at a record pace, exerting influences like early obsolescence of older components and more.
RTW IPC APEX EXPO 2019: KYZEN Intros New Aquanox Aqueous Cleaner
In an interview with I-Connect007 Technical Editor Pete Starkey, KYZEN Executive VP Thomas M. Forsythe introduces the latest member of the Aquanox family of aqueous cleaners and comments on issues of compatibility, rinsability, and consistency of operation.
RTW IPC APEX EXPO 2019: KIC Speaks on Data, Voiding and Traceability
Bjorn Dahle, president of KIC, talks with I-Connect007 Technical Editor Pete Starkey about how the industry has shifted its focus from the machine to data; the issue on voiding and how manufacturers can address this process challenge; and traceability.
RTW IPC APEX EXPO: OK International Soldering Robot Integrates CV Technology
Bryan Gass, vice president at OK International, talks with I-Connect007 Managing Editor Nolan Johnson about their new soldering robot that integrates their Connection Validation (CV) technology. Launched at the IPC APEX EXPO last year, the CV technology provided the company a springboard to have a good start into 2018, and to achieve growth throughout the year.
Day One, Nothing but Fun: The Show Warms Up
The first official day of the IPC APEX EXPO 2019 was full of excitement, activity and business getting done. From the exuberant crowd at the ribbon cutting ceremony, to the closing moments of day number one, the show floor was bustling. Spirits were high from both attendees and exhibitors, sending the signal that optimism and business strength are still the industry mood.
RTW IPC APEX EXPO 2019: MacDermid Alpha Discusses New Materials to Improve Void Issues
Traian Cucu, Ph.D., G.A.T.E Group Leader at MacDermid Alpha Electronics Solutions, discusses with I-Connect007 Managing Editor Nolan Johnson some of the methods to reduce, or eliminate, the solder voiding issue, especially with the continuing trend towards lower-pitch, high-density components.
IPC Conferences Set the Tone for Innovation During IPC APEX EXPO 2019
Monday's docket of sessions at IPC APEX EXPO 2019 presented a wide-ranging array of topics, including the Automotive Executive Forum, the Connected Factory Initiative Workgroup mapping out the future of CFX, the DFX committee celebrating the release of the IPC 2231 Guidelines document, and the Critical Components Traceability Workgroup addressing the creation of a secure supply chain.
Mark Friedman on IPC Membership
Mark Friedman, a member success advocate at IPC, recently spoke with I-Connect007's Barry Matties about the current status of IPC's membership programs, the recent growth they've seen, and some hidden benefits of IPC membership that potential members might not be considering.
STEM: The Future of Our Industry
Facing a growing shortage of talented labor with which to fill the employment positions in America, IPC is working to help solve this problem. Colette Buscemi, senior director of IPC’s education programs, is encouraging IPC members to better engage pre-college and post-secondary college students at the local level. Barry Matties spoke with Colette about the educational programs IPC has put in place to invest in future generations, including the STEM program at this year’s IPC APEX EXPO.
Mentor and Seica Partner for Data Prep and Testing Big Boards
Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.
The Future of the Customer Experience in Mobility
Based on the protocol stack that starts with 5G, moves up to AI, and continues to layer integrations and user interfaces and experiences on top of those lower-level technologies, how does this all apply to the current mobile experience? A panel on the future of mobility with representatives from several major companies covered this and more at CES.
Dispatches from CES 2019: The Future in the Kickoff
Press kickoff briefings at the Consumer Electronics Show (CES) are no stranger to big claims and hyperboles. At the “CES 2019 Trends to Watch” presentation on Monday morning, Steve Koenig, Consumer Technology Association’s (CTA’s) VP of market research, made some pretty big claims about what we should expect to see at the show, but those claims don't seem at all to be hyperbolized.
Who’s the Best of the Best in Hand Soldering?
IPC APEX EXPO 2019 will include the new IPC World Championship Hand Soldering and Rework Competition on the expo floor on January 29 and 30. Twelve competitors from Britain, China, France, Germany, India, Indonesia, Japan, South Korea, and Thailand will compete for the crown and the title of the first-ever IPC World Hand Soldering and Rework Champion.
More Than Inspection: It’s Process Improvement
Barry Matties speaks with Brian D’Amico, president of MIRTEC, about the current state of machine-to-machine communication in the industry, and how the inspection company is interfacing with the different manufacturing languages currently available to gather predictive data and feedback from every inspection step to eliminate future defects.
Welcome to the BIG Show!
This month, we celebrate the impact and reach of the IPC APEX EXPO slated for January 26--31, 2019, in San Diego, California. Have something truly new? It needs to be seen here at IPC APEX EXPO with long-standing products and evolutionary advances from industry stalwarts will grow their installed base here, too. There are other industry shows, but the must-go show for our industry is IPC APEX EXPO.
Top 10 Most-Read SMT007 Articles of 2018
Every year, we like to take a look back at the most popular SMT007 news, articles, interviews, and columns. These are the top 10 most-read SMT007 articles from the past year. Check them out.
What Electronics Manufacturers Need to Know About RoHS 3 Compliance
On July 22, 2019, the latest incarnation of RoHS will come into full effect across the European Union. So, what’s changed? And what exactly are the implications for UK electronics manufacturers? This article provides a recap of what RoHS is, why it matters, and the steps that OEMs will need to take to ensure compliance.
A Look at Medical Electronics Design and Assembly Challenges
We recently spoke with Dr. Despina Moschou, lecturer at the University of Bath, as well as Kaspars Fricbergs, VP of global quality, and Tom Reilly, director of marketing and sales operations, of EMS firm Vexos Corp., to learn more about the challenges and opportunities in medical electronics design and assembly, as well as the relevant regulatory and supply chain issues.
Defense Speak Interpreted: PERM—Pb-free Electronics Risk Management
In this column, we explore PERM—the Pb-free Electronics Risk Management Consortium. No, the group members do not all have curly hair! The name was chosen around 2008 by a group of engineers from aerospace, defense, and harsh environment (ADHE) organizations.
Internet of Body: The Next Big Thing for Medical
Titu Botos, Ph.D., the VP of engineering at NeuronicWorks, discusses with I-Connect007 Managing Editor Nolan Johnson the next big thing to come after the Internet of Things (IoT)—the Internet of Body (IoB), which could include implantables and ingestible medical devices to monitor your body better.
AOI Programs with a Magic Click
Production runs of 10–1,000 assemblies are everyday life for an EMS provider. But what if important staff are on vacation, and component deliveries are very much delayed? And then the customer is determined to have AOI, but the layout of the assembly is highly customized, making it virtually impossible to use complete library entries. Here's how AOI programs can help you in these scenarios.
What is ESD and Why Should We Worry About It?
The realities of ESD, how static charges are generated, how they can be transferred to electronic components and the damage they can do, and what practical controls are required to protect components, assemblies and equipment from damage—these topics were explored and clearly explained in a webinar presented by SMTA Europe Technical Committee members Dr. Jeremy Smallwood of Electrostatic Solutions and Charles Cawthorne of MBDA.
Greg Vance on SMTA Ohio Chapter Updates
This summer, Patty Goldman interviewed Greg Vance, senior project engineer at Rockwell Automation and president of the Ohio chapter, at the SMTA Ohio Valley Expo and Tech Forum in Independence, Ohio. Vance discusses the show, young professionals in the industry, and other events, such as solder paste roundtables.
Is This a Golden Age for Medical Devices?
Just as the telecommunications golden age launched 30 years ago—which led to wireless phones, electronic data terminals, and technology that allows us to watch our favorite shows on our own time and not the TV stations' schedule—it seems that medical device technology is gearing up to do something similar. The Internet of Things (IoT), Internet of the Body (IoB), and printed electronics technologies are emerging, and they're converging with medical devices in a big way.
Understanding the Benefits of CFX
In an interview with SMT007 Magazine, David Fenton, group customer support manager for Blakell Europlacer, discusses the technical challenges and the impact of the IPC Connected Factory Exchange (CFX) initiative on the PCB assembly industry, and what manufacturers can expect from this electronics assembly connectivity standard.
Tempo Automation's Open House Raises the Curtain in San Francisco
Based in San Francisco, Tempo Automation specializes in rapid PCB assembly and on low volume production for a wide range of board complexities. It recently held an open house at its brand-new facility in the South of Market (SoMa) district—which is normally restricted under customer non-disclosure agreements as well as International Traffic in Arms Regulations (ITAR) regulations—to customers, vendors, local designers, and government officials.
RTW SMTAI: Inventec Discusses the 'Green Way'
At SMTA International 2018, Dan Walker, North American sales manager at Inventec Performance Chemicals USA, provides Editor Nolan Johnson an overview and update on Inventec’s environment-friendly cleaning, soldering and coatings products. He also discusses how they are addressing the latest manufacturing issues, including solder voiding.
Christine Pearsall on Tempo Automation and PCB West
Christine Pearsall, senior director of marketing for Tempo Automation, discusses with Consulting Technical Editor Tim Haag what services Tempo Automation provides, what attracts engineers and designers most to the company, and what events they plan to attend in the upcoming year.
RTW SMTAI: KIC's MB Allen on Smart Factory, CFX
Marybeth (MB) Allen, product manager at KIC, speaks with I-Connect007 Managing Editor Nolan Johnson about the smart factory, KIC's new RPI i4.0 software release, and as well as her company's leadership in IPC's Connected Factory Exchange (CFX) initiative.
Investigation on the Assembly Process for m03015 and a Brief Look at m0201 Components
Components continue to shrink in the SMT world, and the next evolution of passive components includes m03015 (009005) and m0201 (008004). The m03015 and the m0201 components will see primary adoption in products that require further miniaturization, which would be SiPs. These modules would then be assembled into products through attachment, another assembly, or via other interconnect methods. This article explores the development of an assembly process (SMT only) for the m03015 component.
Green Circuits' Joe O'Neil and Joe Garcia on the Best Kept Secret
Joe O'Neil, CEO, and Joe Garcia, VP of sales and marketing, at Green Circuits discuss with I-Connect007 Managing Editor Nolan Johnson about recruiting new employees, new training and certification requirements, tariffs, and more.
Challenges and Opportunities with CFX
Larry Chen, global marketing supervisor at Taiwan-based Test Research Inc. (TRI), speaks about how the company is supporting IPC’s Connected Factory Exchange (CFX) initiative, the user interest on the standard, the challenges, and his outlook for CFX.
4 Questions OEMs Typically Ask When Outsourcing
The decision to transfer your electronics manufacturing to an EMS company is a complex process, with the potential to impact your business, your staff, your customers and your suppliers in a multitude of ways. This article highlights four questions OEMs typically ask prospective contract manufacturing partners when they first start engaging with them—and our take on the answers.
I-Connect007 Survey Sees Bright Prospects for Low-Temperature Soldering
There has been an increasing amount of discussion on low-temperature soldering, and solder pastes. And why not? There are several advantages of using low temperature solders—from a technical standpoint and economic perspectives. A recent survey by I-Connect007 saw majority, or 67%, of the respondents saying they will consider using low-temperature solders in their assembly process.
Alpha Assembly Solutions on Training, Education, and Low-Temperature Soldering
In this interview, Jason Fullerton of Alpha Assembly Solutions discusses the benefits and challenges of low-temperature soldering. He also highlights the biggest concerns he’s currently seeing in the industry, including young engineers lacking hands-on manufacturing experience and training, voiding and head-in-pillow issues, and low-temperature soldering demands.
CFX: Building the Foundation for Industry 4.0
IPC has been showcasing the Connected Factory Exchange (CFX) initiative in action at the many industry events this year, providing a technical demonstration operating in real time with standardized machine data delivered from participating exhibitors through the cloud and onto visitors' cellphones. In this interview, Dave Bergman, VP for international relations at IPC, discusses the latest developments with IPC’s CFX standard, including key highlights, impact in the electronics assembly industry, and what’s next.
Pros and Cons of Dual Sourcing
Now, more than ever, there's a need for responsive and flexible supply chains. For OEMs, one solution to mitigate the risk of supply chain disruption is to maintain relationships with more than one supplier through dual sourcing—the practice of purchasing a chosen raw material, product, or service from two (or sometimes multiple) sources. Here are it's pros and cons.
Meet Goepel electronic's New Managing Director, Alice Göpel
In August 2018, Alice Göpel took over the managing director position of Goepel electronic, replacing her father Holger Göpel who had managed the company since 1991. In this interview with SMT007, Alice discusses her career, what inspires her, and her outlook for the industry.
RTW SMTAI: Steve Greathouse Discusses Award, Highlights Need for New Engineers
Steve Greathouse, senior staff engineer at Plexus Corp., and recipient of SMTA’s Excellence in Leadership Award this year, speaks about the magic of the SMTA as a collaborative and supportive professional organization. He also discusses the need for “new blood” to join the manufacturing workforce as more senior engineers leave the industry.
RTW SMTAI: PalPilot on Adding Value to Design and Assembly
Tim Sullivan, vice president of sales at PalPilot International Corp., speaks with I-Connect007 Managing Editor Nolan Johnson about their services, and how they add value to their customers from design to assembly/manufacturing. He also talks about their online platform called FootPrintKu, which help designers when it comes to footprints of their design.
RTW SMTAI: Libra's Rod Howell Discusses Tariffs Issue
Rod Howell, CEO of EMS firm Libra Industries, speaks with I-Connect007 Managing Editor Nolan Johnson about the ongoing tariffs issue, how it impacts the global electronics manufacturing supply chain, and their strategic response to address the issue.
RTW SMTAI: KYZEN's Forsythe Discusses Gap in Cleaning Knowledge
Tom Forsythe, executive vice president of KYZEN Corp., busts myths around "how-clean-is-clean." He discusses the increasing cleaning challenges as devices get more dense and form factors become even smaller, and how these trends are driving the need for cleaning and causing a gap in cleaning knowledge. He also speaks about their new products in data collection and monitoring software for cleaning equipment.
RTW SMTAI: Harold Sneath Highlights Alpha’s Reclaims Business
Reclamation can be a profit center, not a cost of doing business. At the recent SMTA International 2018 conference and exhibition, Harold Sneath, Eastern Regional Reclaim Manager at Alpha Assembly Solutions, lays out the reclamation services available through Alpha.
SMTAI 2018 Closes on a High Note
SMTA International 2018, which took place in Rosemont, Illinois is now in the history books. This multi-day event, held October 14-18, at the Donald E. Stephens Convention Center, was packed with keynotes, conferences, lively discussions, committee meetings and a two-day exhibition.
IoT: Driving Change in Manufacturing
In the manufacturing world, the Internet of Things (IoT) can be seen as an element of Industry 4.0. The idea behind it is that factories would evolve to become smarter, to become a lot more flexible—to be able to make the products that customers want, basically at any time that they need.
How CIM and IoT Can Make Your Factory Smart
As business needs challenge the electronics assembly industry to support increased flexibility, lower overhead, and stricter quality standards, the industry is rapidly adopting improvements in automation and analytics to meet the challenge. This article explores the changes in culture between the past, where data was simply sent point to point, and today’s multi-layered IoT technology-based solutions, as well as the effects and opportunities that are here now for the taking.
Tips to Improve Soldering Tip Life and Reduce Cost
Whether in production, or repair and rework, the cost of soldering iron tips can be easily overlooked, but with today’s requirement for higher temperatures in lead-free solder applications, the consumption of tips has dramatically increased. This fact, combined with changes in tip design to meet the higher thermal load requirements, has also resulted in escalating tip costs, making tip care a high priority.
The Smart Robot Revolution is Here
The distance between imagination and reality has reduced considerably. Thanks to advanced technologies such as artificial intelligence (AI), data processing, and machine vision, the science fiction writers' vision of smarter robots is becoming a reality. These more intelligent machines are also making a big impact in manufacturing.
Indium on Voiding and Auto Electronics Test Standard
In this interview with I-Connect007, Indium Corporation Technical Manager Jonas Sjoberg discusses voiding and other key challenges in soldering, as well as an automotive electronics testing standard based out of South Korea that is seeing increased utilization all over Asia. He also talks about the increasing trend in manufacturers moving to Type 5 and Type 6 solder powders, and how this is causing its own set of challenges in printing.
Electronic Components Market Update
Unfortunately, there is still no end in sight to the electronic component shortage, and some lead-times are being quoted with 2019 and even 2020 delivery dates! So if you are working with an EMS provider, it remains vital that you communicate and share forecast information with them. You may also want to start looking at the option of fitting, or designing in, smaller components to your PCB assemblies.
RTW NEPCON South China: SEHO Discusses New Production Facility in South Korea
Andreas Reinhardt, R&D director at SEHO Systems GmbH, speaks about their new production facility in South Korea, which aims to address the growing lead times in their supply chain. He also talks about how emerging technologies such as more and more sensors and connections, big data, and cloud computing are impacting the electronics assembly industry.
XR Update: Emerging Realities
The rate of advance in the use of XR—the term now being used to cover AR (augmented reality), VR (virtual reality), and MR (mixed reality)—in many areas, along with advances in the hardware and network capability supporting the use of XR, is accelerating. And because things are moving so quickly, here's a quick review and an update on recent developments in this field.