The Shaughnessy Report: Design Takes Center Stage at IPC APEX EXPOLatest Articles
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
This week, the IPC APEX EXPO event has cast a long shadow across the news feeds. No, that’s not the right metaphor. No, not a shadow; shadows are dark. It would be more accurate to say IPC APEX EXPO cast a beam of illumination upon the news feeds for the electronics manufacturing industry. To that end, the APEX EXPO news makes a prominent appearance in this week’s editor’s picks.
Advanced Packaging Means Advanced Routing Issues
In today’s ever-shrinking world of electronics designs, the use of BGA parts with very fine pitch features is becoming more prevalent. As these fine-pitch BGAs continue to increase in complexity and user I/O (number of balls), the difficulty of finding escape routes and fan-out patterns increases. Additionally, with the shrinking of silicon geometry leading to both smaller channel length and increased signal integrity issues, some of the traditional BGA escape routing techniques will require a revisit and/or adjustment to allow for not only successful fan-out, but also successful functioning of the circuitry of the BGA design.
Scaling Beyond Silicon
Technology has always invoked radical changes, but unlike today, there used to be one major revolutionizing technology trend at a time. The world is becoming increasingly connected, more automated and more intelligent, driven by generational drivers—hyperscale computing, 5G, artificial intelligence and machine learning (AI/ML), industrial IoT (IIoT), and autonomous vehicles—which are invoking disruptive technological forces on vertical markets, unfolding varied levels of microelectronics and digital transformation across the globe. The increasing demand for miniaturization and higher speed is changing the dynamics of the semiconductor components needed to store and process data.
Bright Lights, Big City: STEM Event Kicks Off
The San Diego sun was warm and bright on Wednesday afternoon, but it didn’t stop the crowds from filling the aisles at IPC APEX EXPO 2023 for the trade show’s second official day. Technical conferences, professional development courses, and a keynote from IPC President and CEO John W. Mitchell kept attendees busy. But the real highlight of the day was upstairs where approximately 300 high school students from the local San Diego area rode buses to the San Diego Convention Center for a day full of activities meant especially for them.
IPC APEX EXPO 2023: Face-to-Face Not Mask-to-Mask
It was a bright, sunny California day as IPC APEX EXPO officially opened its doors on Tuesday, Jan. 24 at the San Diego Convention Center. The Technical Conference began on the same day, while the program of standards meetings and professional development courses had been in progress since Saturday, Jan. 21. During the hustle and bustle of the show build-up over the weekend, it was clear to see that so many exhibitors had the confidence to bring so much major equipment and to invest in such spectacular booths to display it.
A Challenge Facing Aerospace Designers In 2023
As the aerospace industry has been tasked with fitting increasingly complex electronics in existing airframes the demands on PCB substrates have begun to overtask the existing state of the art in PCB fabrication. Recently, I was called in to troubleshoot some reliability problems with a very dense PCB that had components on both sides and required the use of stacked blind vias and buried vias. The usual name for this kind of design is “build-up fabrication,” requiring many trips through the lamination, drilling, and plating operations at a fabricator.
Monday Recap: Optimism and Economics at IPC APEX EXPO
It was a packed house for two large events at IPC APEX EXPO 2023 on Monday, Jan. 23, as the EMS Leadership Summit was wrapped in the pale veil of caution, meanwhile hundreds more gathered to hear from IPC’s chief economist, Shawn DuBravac. At the EMS summit, the morning presenters from IPC all shared silver linings they saw inside the fading clouds of uncertainty.
Classes and Meetings Under Way at IPC APEX EXPO
IPC APEX EXPO 2023 doesn’t officially kick off until Tuesday, but there’s plenty of action going on here at the San Diego Convention Center. Booths are sprouting up on the show floor, and exhibitors are starting to arrive. Upstairs, committee meetings have been taking place all weekend; the IPC-J-STD-001 and IPC-A-610 Joint Task Group, and IPC-A-600 and IPC-6012 Joint Task Group meetings, were abuzz with activity. The Professional Development classes began on Sunday, covering everything from design through assembly processes, flex and rigid-flex, and technologies of the future.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
We’re in the middle of show season, and it certainly “shows.” Thank you very much. I’m here all week. Don’t forget to tip your wait staff. This week, we published a variety of articles, columns, and news items, and much of it centered on trade shows. Technical Editor Dan Feinberg brings us a report from CES 2023. IPC announced the winners of the Best Technical Paper awards for IPC APEX EXPO 2023. And we have an interview with Altium’s Rea Callender about the company’s educational efforts at APEX and around the globe.
It’s Here: The Launch of IPC Community Magazine
IPC Community Magazine launches today at IPC APEX EXPO 2023, both in digital and print form. It is now widely available for download at no cost. This magazine helps tell the stories of IPC, particularly for IPC members who use and interact with the trade organization. IPC worked closely with I-Connect007 (IPC Publishing Group) to develop the concept for the publication, and asked John W. Mitchell, president and CEO of IPC, to share a few thoughts as he looked at the magazine for the first time in print.
Setting Expectations for IPC APEX EXPO's Women in Electronics Reception
Emily Calandrelli, IPC APEX EXPO’s opening keynote speaker and featured speaker of our Women in Electronics Reception, is an MIT-engineer turned Emmy-nominated science TV host. She’s the host and co-executive producer of “Emily’s Wonder Lab” on Netflix, she's featured as a correspondent on Netflix’s “Bill Nye Saves the World” and an executive producer and host of FOX's “Xploration Outer Space.”
Altium Focuses on Design Education
Altium keeps its eyes on the designers of the future. The company has been working with colleges and universities for years, providing free seats of Altium Designer for the next generation of PCB designers and design engineers. At IPC APEX EXPO 2023, Altium will be providing software for the finalists in the IPC Design Competition just as it did last year. They offer a variety of other educational programs as well, including Upverter classes and a design competition that aims to address environmental change. Here, Rea Callender, Altium’s VP of education, discusses its educational programs and plans for the week of the show.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
“New year, new you.” That tagline seems to be everywhere right now. All five must-reads this week reflect this theme. Does this apply to you and your company? We have quite a duke’s mixture of articles. We’ve got AT&S outlining their market position on advanced packaging, and Auburn University doing research on smart manufacturing processes. Keysight is coordinating practical 6G research in Europe, Technica shares where they see the market growing, and SEMI adds new members to a key board responsible for market guidance. These five stories drew a lot of reader attention this week.
The Battle of the Boards
Last year, IPC held its first-ever design competition at IPC APEX EXPO in San Diego. PCB designers from around the world competed in a series of heats during the months before the show, culminating in a showdown on the show floor between the top three finalists. Rafal Przeslawski, now with AMD, took home the top prize last year. This year, the competition is back for its sophomore year. I asked Patrick Crawford, manager of design standards and related programs for IPC, to “layout” the details on the design contest, including lessons learned in 2022 and what’s new for the 2023 competition.
Shawn Dubravac: What’s New in Tech
As the world grapples with issues like climate change, consumers and manufacturers are increasingly looking for ways to reduce environmental impact. This has led to a focus on fostering innovation in sustainable materials, renewable energy sources, and recyclable components. One example is CarbonX, a new carbon material composed of nano-sized carbon filaments that could help tire makers meet the increasing demand for sustainability. Technology will play a pivotal role in this transformation and one sector set to see tremendous change is the auto industry.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The youngsters are back in school, and we’re all back to work. The water is back on for most of us in Atlanta; when temps dropped down to 8 degrees Fahrenheit, our pipes started bursting left and right. After a Christmas dinner with no water, I have a new appreciation for H2O. It’s been a busy week, and we published a variety of articles, columns, and news items. In this week’s top five, we have news about the market in Southeast Asia, a look at what the CHIPS Act really entails, a deep dive into CMMC, and a peek at how printed electronics developers are using flexible circuit concepts to facilitate PEC. We also say goodbye to a Top Gun PCB designer who left us way too soon.
Where Exactly is the Signal?
When I first got involved in printed circuit board design in the early 1990s, fast rise/fall times were just starting to become an issue. Prior to that we had been pretty much a “connect-the-dots” kind of technology. But as rise times got faster, it became necessary to worry about (electromagnetic) fields. One manifestation of that was EMI, and the increasing need to pass FTC compliance testing.
ICAPE: Solutions With No Limits
Over the past five years, ICAPE Group has strongly focused on analyzing the complex needs of the market to provide worldwide solutions for customers whose needs range from simple to very complex technologies. The services provider has done this by putting offices in key strategic locations—particularly China—with staff that understand the nuances of language and culture. These types of decisions make an important difference when it comes to getting customers exactly what, and when, they need it. Yann Duigou, CMO, and Bingling Li Sellam, VP of Northern Europe, share their secrets for success.
'Happy New Year' Celebrations Around the World
New Year’s Eve is tomorrow, and 2023 is around the corner. Where did the time go? That’s the $64,000 question. We celebrate New Year’s Day, in part, to help us mark the passage of time—sort of a shared experience for the human race. Humans have been celebrating New Year’s Day for thousands of years, but the party really took off in 45 BC, after Julius Caesar revamped the Roman calendar. From that point until the middle of the 18th century, New Year’s Day in Europe fell on a variety of days, including Dec. 25, March 1, and March 25. Andy Shaughnessy gives us the details.
Happy Holden on Gerry Partida’s ‘Significant’ Microvia Reliabilty Paper
Gerry Partida, vice president of technology at Summit Interconnect, authored a technical paper, “Next Progression in Microvia Reliability Validation—Reflow Simulation of a PCB Design Attributes and Material Structural Properties During the PCB Design Process,” at IPC APEX EXPO 2022, and it’s worth revisiting. This significant paper on microvia reliability validation provides a summary of what’s been happening in the microvia fabrication arena, especially regarding the issue of latent defects in stacked microvias.
I-Connect007 Editor's Choice: Five Must-Reads for the Week
Just because it’s a holiday week doesn’t mean the news is slow. Okay, maybe a little bit slower than normal, but “slower” can also be the same as “fast, just less fast.” We’re going a bit deeper into the list for our must-reads looking for high-impact hard news. I mean, you’ve all read the curated stuff already, no sense rehashing that. In fact, I’ll even throw in a bonus news item just because there was some good stuff this week. Have a great New Year’s weekend.
DFM 101: Final Finishes ImmSn
One of the biggest challenges facing PCB designers is understanding the many cost drivers in the PCB manufacturing process. This article is the latest in a series that will discuss these cost drivers (from the PCB manufacturer’s perspective) and the design decisions that will impact product reliability.
A Sneak Peak with Jim van den Hogen
Jim van den Hogen has been teaching PCB designers and design engineers about fabrication processes for decades. Twenty years ago, I had the opportunity to see a class of his at PCB West; even back then, the room was jammed with designers eager to learn more about DFM techniques. Now Jim is bringing his teaching expertise to IPC APEX EXPO 2023 this January with a similar class directed at PCB designers. I asked Jim to give us a sneak peek into his curriculum and to share what he hopes attendees will take away from his class, as well as his thoughts on how to best bridge the gap between design and fabrication.
Designing a Sustainable Future
While it may be traditionally considered a PCB fab and assembly show, IPC APEX EXPO is quickly becoming a destination for PCB designers and design engineers. Flipping through this year’s schedule, I counted 15 Professional Development and Technical Conference classes that focus on PCB design, as well as several fabrication classes that many of you should probably take. I checked in with Carlos Plaza, IPC’s senior director of educational development, to discuss the organization’s drive to present more PCB design curriculum at the upcoming show and how the show can give designers the tools they need to overcome the many challenges currently facing the industry.
The Five Most-read Design007 News of 2022
Each December, we like to look back at the most popular articles of the past 12 months. You never know which article is going to blow up like a Harry Styles album. So, grab some leftover ham and hang out with us for a while. For your holiday enjoyment, here’s a blast from the past: the top five most-read Design007 articles of 2022.
The Five Most-read Design007 Articles of 2022
Each December, we like to look back at the most popular articles of the past 12 months. You never know which article is going to blow up like a Blake Shelton album. So, put on your ugliest holiday sweater and prop up that iPad. For your holiday enjoyment, here’s a blast from the past: the top five most-read Design007 articles of 2022.
The Most-read I-Connect007 Articles of 2022
Each December, we like to look back at the most popular articles of the past 12 months. You never know which article is going to blow up like an Avril Lavigne album. So, grab a cup of eggnog and curl up by the fire! For your holiday enjoyment, here’s a blast from the past: the top five most-read I-Connect007 articles of 2022.
I-Connect007 Editor's Choice: Five Must-Reads for the Week
In this week leading up to Christmas, we have a little bit of everything. Pete Starkey has a review of the most recent EIPC Technical Snapshot, while Tom Kastner discusses the dwindling number of PCB companies in North America. Are we really down to 170 companies? IPC reports that North American PCB sales up 26.1% in November YOY, and the book-to-bill is dead-on at 1.00. Cybord CEO Zeev Efrat explains how his company can provide 100% component inspection. And I have an interview with a student I ran into at PCB Carolina who is working toward his “dream job” on being a technician. As Alex Barile says, he’d hate to work at a desk all day; he likes to install equipment.
Workflow Challenges in Fabrication
Paul Cooke, the senior director of business development for Ventec International Group, is presenting a class at IPC APEX EXPO 2023 that looks at workflow challenges in fabrication, and the myriad drivers that can affect yield, reliability, and cost. Here he discusses the details of this Professional Development course, what he hopes attendees will take away, and why designers and design engineers would benefit from this class.
PCB Carolina: Alex Barile Studying for His Dream Job
Visitors jammed the aisles at PCB Carolina, but I noticed someone who stood out from the crowd: Alex Barile, a student at Wake Tech, a community college in North Carolina. Alex loves the physical and mechanical aspects of machinery, but learned pretty quickly he doesn’t want to be sitting behind a desk all day. He’s found a major that fits both his personality type and professional interests.
Tim Haag Celebrates 10 Years as a Columnist
I ran into columnist Tim Haag at PCB West, who was visiting the show with co-workers from the technical writing company First Page Sage. We discussed Tim’s years as a Design007 Magazine columnist, and some of the drivers affecting the technical writing market, such as the retirement of many PCB subject matter experts who were also go-to writers within their companies.
The First India Pavilion
For the first time, IPC APEX EXPO will host an “India Pavilion,” showcasing 16 Indian companies promoting India’s electronics manufacturing capabilities. The initiative was undertaken by the Ministry of Commerce & Industry, Government of India, and implemented by the Indian government agency, Electronics and Computer Software Export Promotion Council (ESC) India.
Taiyo: Reopening Europe for Solder Mask
Nolan Johnson and Stuart Down discuss Taiyo’s partnership with Ventec and how both companies are leveraging their expertise to blaze a trail into the European PCB market. Stuart shares his outlook on the market and the unique challenges posed by global political instability and supply chain constraints, as well as how Europe’s evolving chemical regulations have impacted solder mask formulation. With their sights set on ramping up manufacturing capabilities, Taiyo sees a secure path forward to establishing a sizeable market presence in this promising region.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The holiday season is in full swing for most of us; no matter which holiday you choose to recognize here in the second half of December, it’s almost certain that your routine has some level of interruption to it right now. Chances are, you might not be consuming as much of your usual diet of industry news and information, what with all the holiday treats and traditional meals to be consumed instead. That, gentle reader, is why we bring you this week’s Top 5 editor’s picks–your slimmed down version of the news, leaving you more time for the other delights of the season. So without further ado, we bring you the five news items you really should make room for this week.
NCAB Creating a New Culture of Success
NCAB has been one of the most active companies in the industry when it comes to growth through acquisition, building an extensive global network over time. During the electronica show in Munich recently, Nolan Johnson met up with Greg Nicol and David Grant, both managing directors with NCAB’s UK organization. Greg and David had number of interesting insights on NCAB to share.
A New Gathering Place for Designers
IPC APEX EXPO started out as a show for the PCB manufacturing community, but it’s grown beyond that. This year, there’s more design curriculum at the show in San Diego than ever before. IPC instructor Kris Moyer has been instrumental in leading the organization’s efforts around PCB design and design engineering curriculum. So, I asked him the million-dollar question.
Industry Innovation Starts Here
If it isn’t clear already, your money, time, and effort will be well spent attending IPC APEX EXPO in January. Here, we’ve outlined the top six reasons that this event will be the highlight of your year. We’ve done all we can to make the event not only memorable, but a show that allows you to connect with industry peers, learn how to enhance your skills, help advance the industry, and discover new insights on products and strategies from industry innovators.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
We’re into December, and the new year is around the corner. Things are looking pretty good for our industry. Trade show attendance is back up to pre-COVID levels, and a lot of companies are having banner years. Has the virtual trade show gone the way of the dodo bird? Let’s hope! This week, our must-reads include articles and news items on the decline of R&D, STEM education for kids, why vias do not heat up, the need for more DFT, and the lack of movement toward intelligent data transfer. Designers just love their Gerbers, but Dana Korf has a few ideas about how to make Gerbers obsolete.
Physics, Electrical Engineering, and PCB Design
When I was a sophomore in college, I had an amazing professor for Physics II: Electricity and Magnetism. He made a series of complex topics fun to learn, and his personality and way of teaching were almost tailor-made for the way I like to learn. He explained new concepts through practical examples, and always kept students engaged throughout the class, making sure everyone understood the lectures. Physics II was an engineering prerequisite, and I didn’t mind taking the class since I really enjoyed the material. However, I did find myself wondering a few times, “Will I ever use any physics in real life?” It turns out that the answer to the question was yes.
Polar Instruments: Simulating PCB Potentialities
Nolan Johnson checks in with Polar’s Martyn Gaudion on the evolving needs of global PCB manufacturing markets in a post-pandemic world, where generating accurate PCB specification documentation is essential to successfully navigating today's rampant supply chain constraints. Polar has positioned itself to meet these needs through agile software product developments that allow OEMs and fabricators to simulate material interactions and end-product specifications, including in-demand features like a comprehensive "structure view" that allows users to visualize all the transmission lines on a given a PCB. Though keeping pace with the demands of a rapidly growing industry has been challenging, Polar's commitment to innovation has kept its software suite ahead of the curve.
The Test Connection: Spreading the Word About DFT
As signal speeds continue to increase and feature sizes decrease, PCB designers are beginning to pay greater attention to test and design for test (DFT) strategies. Bert Horner, president of The Test Connection in Hunt Valley, Maryland, is spearheading this drive to show designers the benefits of a solid DFT plan, as well as the downside of not having a test strategy. I met with Bert at PCB Carolina, where he was exhibiting and presenting a paper during the conference. We discussed his presentation, as well as why designers need to understand test and DFT issues, and why we need to see the PCB as one small—but very important—part of the entire system.
Electronics vs. Physics: Why Vias Don’t Get Hot
Most of are aware that when we pass an electrical current through a trace (conductor), the trace will heat up. This temperature increase is caused by the I2R power loss dissipated in the resistance of the trace. The resistance of a copper trace is mostly determined by its geometry (cross-sectional area), and there are lots of studies trying to look at the relationship between the current down a trace (of known size) and the resulting temperature of the trace. But the situation is much more complicated than this. There are physical properties that exist that result in helping to cool the trace. These properties are usually a combination of conduction of the heat away from the trace through the material, convection of the heat away from the trace through the air, and radiation of the heat away from the trace.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Normally, the holiday season is a slow(ish) news time, but this year just feels different. My opinion is that the technology industry banked up a whole bunch of innovations and new products during the pandemic disruptions, which are coming to market as quickly as possible. The November/December news is full of technology discussion, as my selections this week clearly demonstrate.
Randy Faucette Discusses PCB Carolina’s Explosive Growth
One of the fastest-growing tabletop shows is PCB Carolina, which is held at NC State University in Raleigh. Each year, the show draws more exhibitors than the venue hall can hold, pushing some exhibitors out into the lobby. And this year, the number of registered attendees broke the 1,000 mark for the first time. At PCB Carolina, I spoke with Randy Faucette, the founder of the Research Triangle Park design bureau Better Boards, which organizes this annual tradeshow and conference, and I asked him to share the secret to this show’s expansion.
The Growing Need for UHDI
Jan Pedersen of NCAB Group is deeply involved in IPC standards development surrounding ultra HDI and keeps his finger on the pulse of the industry surrounding this type of fabrication. With Asia still dominating this area, Jan sees the need for U.S. and European PCB fabricators to make the investment if they want to stay competitive.
An Opportunity to Give Thanks
I-Connect007 wants to take this opportunity to give thanks to so many people that make "the magic" happen day in and day out. Thanksgiving is a time, of course, to give thanks for the bounty that we enjoy, and that couldn't be truer each day for the support we receive in editorial, advertising, and marketing of our daily, weekly, and monthly publications. It's a pleasure to contribute to the industry—and to receive contributions. Read our Thanksgiving message and then enjoy your turkey day.
My Experience With Maxwell
I was first introduced to James Maxwell in 1967 as a college student. I had to decide whether I would take the Maxwell fields course or the switching and coding course. Being a chemical engineering major with a co-major in control theory, I had heard about the trials and tribulations of the infamous Maxwell fields course.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
We’re heading into the holiday season, and tradeshow season is in full swing. Managing Editor Nolan Johnson and technical editor Pete Starkey have spent the week in Munich covering electronica, and apparently the attendance was wunderbar. COVID still persists, but everyone is ready to return to some normalcy. There’s a lot going on in our industry. In this week’s roundup, we have articles on everything from rigid-flex to the supply chain, as well as a primer on the role of physics in PCB design. As we move into the new year, you should check out this Top 10 list of tech trends for 2023, courtesy of Gartner.
The Physics of PCB Design
In this wide-ranging interview, Dr. Eric Bogatin discusses the relationship between physics and electrical theory, and why it’s critical for designers and design engineers to understand the laws of physics. As he points out, the math is important, but designers shouldn’t let the principles of physics “hide behind the math.” Eric discusses some points of physics that designers need to understand, the physics resources available, and why it’s so important to have some understanding of Maxwell’s equations, even if you don’t have a strong math background.
DownStream Flexes in Rigid-Flex
During PCB West, I caught up with DownStream Technologies co-founder Joe Clark and Senior Product Marketing Manager Mark Gallant. We discussed some of their latest tool updates, including a greater focus on bringing post-processing functionality, such as inter-layer analysis capability, to rigid-flex circuits. Joe also offered a look at global design trends going into 2023, as more engineers take on PCB designer roles while senior designers are retiring.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The industry news cycle seems to be picking up speed lately. Of course, 30 days into the quarter is about when public companies announce their results, and in the midst of this worldwide financial situation, we’ve got all eyes on anything coming out from our counterparts in the industry. I’ve noticed that global corporate results (Nan Ya PCB and TTM, in particular) do seem to be on everyone’s radar. In addition to financial news, trade shows are popping back up around the world—Europe, India, and a special report from editor Andy Shaughnessy, who took his own road trip to Raleigh, reporting on PCB Carolina, which had its own heyday this year.
PCB Carolina Breaks Attendance Record
PCB Carolina has been growing consistently for the past decade, and this year the show reached a milestone: more than 1,000 attendees. Yesterday, the show was the busiest I’ve ever seen it; I almost had to park off the NC State University campus. Fortunately, I’m an expert at “the parking lot game.” I waited until a guy was leaving and then I sniped his spot. Bam!
IPC to Unveil New Member Magazine, ‘IPC Community’ at IPC APEX EXPO 2023
IPC, in partnership with IPC Publishing Group (I-Connect007) will unveil an exciting new publication, "IPC Community," at IPC APEX EXPO 2023, as a continuation of its commitment to better serve the electronics industry and provide additional value for IPC members.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
We’re officially in show season and Managing Editor Nolan Johnson just got back from SMTA International. As he says in his review, the show drew a sizeable crowd this year. With the pandemic in the rear-view window, let’s hope our trade shows are getting back to normal.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Halloween is next Monday and parties will be taking place over the weekend, I’m sure. Here in the United States, at least, the “any-holiday-is-an-excuse-for-a-party” crowd has integrated Halloween, along with Valentine’s Day, St. Patrick’s Day, and Cinco de Mayo into wide-ranging opportunities for themed revelry. The news this week has been a bit crazy as well, though certainly not alcohol-fueled. There was a lot of important news and narrowing it down to just five was thought-provoking yet ultimately rewarding. Here then, are the five top pieces of news you shouldn’t miss this week.
The Printed Electronics Roundtable, Part 3
We recently conducted a roundtable with a team of printed electronic circuit experts from companies that run the gamut: John Lee and Kevin Miller of Insulectro, Mike Wagner of Butler Technologies, Tom Bianchi of Eastprint, and John Voultos of Sheldahl Flexible Technologies.
In this third and final installment of the roundtable, these experts discuss some of the differences and similarities between PEC and traditional PCB processes, the future of printed electronic circuits, and why the best way to learn about this technology is through networking with veterans of this segment who are eager to share their expertise with the next generation.
Sunstone’s Matt Stevenson Shares Insights From New PCB Design Book
There’s designing the “perfect” circuit board and then there’s designing a board that is “perfect for manufacturing.” While seasoned designers and design engineers understand many of the nuances, PCB fabricator Sunstone Circuits has just published a new book specifically for new designers who have the knowledge of design but are still learning what it means to get the board manufactured. Sunstone’s Matt Stevenson takes the reader through a series of situations that should help clarify what’s happening in the fabrication process and how to adjust a board design to be better suited for manufacturing.
HDI, A-SAP and mSAP: A Designer’s Point of View
HDI—high-density interconnect—designs require some different thinking on the part of the designer. One of the first things to consider is whether you need HDI, and if so, how much. The HDI option comes into play as soon as you purchase any components with 0.5 mm pin pitch. The number of these components and other specifications of your design will determine the amount of HDI you will need. Here’s a quick list of HDI options.
Forming Standards for Ultra HDI
To get the latest news about ultra high-density interconnections (UHDI), we checked in with Jan Pedersen, NCAB Group’s director of technology. Jan is co-chair of IPC D-33AP, and a great source of overall DFM expertise as well. We asked him to give us a snapshot of UHDI in the industry, where we’re headed, and what this means to PCB designers.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Where did the year go? I can’t believe we’re planning our January and February issues now. It was 84 degrees most of last week in Atlanta, and now it’s 31. I guess I should take my Hawaiian shirts out of rotation! This week we have quite a variety of articles for you. It’s officially show time and the industry is back in business in a major way. We have some news coming out of last week’s advanced packaging event in Washington, D.C., and an article about navigating SMTA International, which opens on Halloween this year in Minneapolis. We have a great column on avoiding EMI with good routing strategies, and an article on electrically conductive inks. To top it off, I-Connect007 has published a new book, written by Matt Stevenson of Sunstone Circuits, that posits a new “design for”: Designing for Reality. If you’re a designer, isn’t designing for reality what it’s all about?
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in