Quest for Reliability: Voices Carry

The title of my column this month is “Voices Carry,” so not only is it a great chance to revisit the wonderfully written, top-10 hit song by ‘Til Tuesday/Aimee Mann, but it is also a good opportunity to think back to the voices I have heard in the electronics industry, and the voices they heard, and even the ones they heard. I am referring to what I consider to be the voices of modern electronics and electronic assembly processes.

To me, this starts around 1943 with the advent of the PCB. Certainly, many other crucial inventions and advancements were made before that, which paved the way for the PCB to be necessary. But when I think about modern electronics, that includes the bare board as a basis for almost everything we do in this industry. The actual date, according to our friend Google, is 1936 when Paul Eisler developed the PCB while working on a radio set, but it was 1943 when the USA started to further develop and use this technology on a large scale for use in proximity fuses during WWII.

As with a lot of technology we have today, PCB and PCBA advancements were driven by war. It’s a shame that the same type of technology can’t be driven by tacos, but I digress. In 1958, a Texas Instruments employee by the name of Jack Kilby developed the hybrid integrated circuit, which really opened the flood gates of technology. Fun fact: Kilby also led the development of the handheld calculator, which would eventually be put on our wrists, making it very easy to spot the cool kids in a crowd.

To read this entire column, which appeared in the November 2019 issue of SMT007 Magazine, click here.

Back

2019

Quest for Reliability: Voices Carry

12-06-2019

The title of my column this month is “Voices Carry,” so not only is it a great chance to revisit the wonderfully written, top-10 hit song by ‘Til Tuesday/Aimee Mann, but it is also a good opportunity to think back to the voices I have heard in the electronics industry, and the voices they heard, and even the ones they heard. I am referring to what I consider to be the voices of modern electronics and electronic assembly processes.

View Story

Quest for Reliability: Artificial Reliability Over Intelligence

11-26-2019

As the industry begins to shift from standard design tools to artificial intelligence (AI), reliability might be overlooked in an effort to build “smarter.” Over the last few years, the desire to manufacture anything and everything for less has included removing humans from as many positions as possible. There are a couple of viewpoints, and I can see positives in both.

View Story

Quest for Reliability: Reliability by the Book

11-04-2019

Having been in electronics for just shy of 20 years, I can say that the next time we work on a Class I failure analysis project, it will pretty much be the first. Class I electronics serve a different purpose in life, and if they fail, it’s normally not a big deal; instead, it’s mainly a minor inconvenience. In this month’s column, I’ll speak to specifications for Class I, II, and III products per IPC definitions as well as the IPC standards process.

View Story

Quest for Reliability: SMTAI 2019 Thoughts

10-16-2019

Before I headed to Rosemont, I was a little skeptical if it would be worth it for me, considering the lack of task groups that had become my SMTAI/IPC APEX EXPO focus. But after three days of sessions (and a somewhat impressive third-place showing at the SMTA trivia night), I was reminded of why I went to SMTAI in the first place: to learn about the newest technology and how to address age-old problems that are ever-evolving in this era of miniaturization.

View Story

Sealing Your Fate

08-16-2019

Coating does not always prevent failures; it is just as important to look at your cleanliness levels just as you would with an assembly that is not bound for coating. If you have a dirty assembly, you might be buying a little time, but ultimately, you've sealed your own fate.

View Story

Quest for Reliability: The F Word

07-19-2019

The word "failure" is as nasty as it gets in our world. It goes against everything we thought we knew. All contract manufacturing facilities strive to build a reliable product, or at least they all should. The problem is too many companies hope they are building reliable products without doing the work required to ensure they are.

View Story

Quest for Reliability: These Darn Kids/Back in My Day

04-24-2019

This month’s topic is focused on youth, both in terms of humans and technologies. I think these two topics go together since they rely on each other to a large degree. The latter has more than likely shaped or even invented by the former.

View Story

How Smart Is Your Factory?

04-03-2019

When you plan a production facility with the mindset that connectivity and optimization will be key aspects of your operation, it will pay dividends in the form of lower production cost, better traceability, and higher reliability.

View Story

The Cost of Quality and the Higher Cost of Failure

03-13-2019

If you are shopping a new product around to multiple contract manufacturers (CMs), and if all other things in two separate CMs are equal including price and delivery times but one offers a more comprehensive ongoing quality monitoring system, why wouldn't you go with that one? You usually pay some type of premium for the CM that has an overall quality monitoring system that goes beyond just ICT or bench level testing. Definitely, most CMs will give you some sort of assurance that the product is working as it leaves the facility, but if one has a mindset that more than basic testing is required to show reliability, you will more than likely have fewer field failures.

View Story

The Effect of Thermal Profiles on Cleanliness and Electrical Performance

02-21-2019

The process of thermal profiling is one of the most important considerations when setting assembly parameters in reflow soldering. Knowing how to effectively profile includes choosing the proper equipment, understanding the results and being able to adjust as necessary.

View Story
Back

2018

Does Medical Device Reliability Worry You Sick?

12-06-2018

When you are manufacturing high-reliability assemblies related to medical industry, it is critical to take a very close look at the assembly process and all other processes that can influence the end-use reliability—even seemingly unrelated processes, such as post-installation cleaning—as it really could be a matter of life or death.

View Story

Are You Connected to Reliability?

10-30-2018

The need for communication between every operator on the manufacturing floor can be a critical difference between a reliable piece of hardware and one that presents some level of unexpected performance. This column highlights a few things happening in the shop floor, such as as touch-up soldering and third shift issue, not commonly communicated, which can cause performance issues.

View Story

Are Megatrends Putting Your Product at Megarisk?

10-03-2018

It took 38 years for radio to get 50 million users, television made it in 13 years, Internet in four, iPod in three, and Facebook in only two years. What these numbers mean to our industry is the need to create electronics at blazing speeds that we haven’t seen before. But how will it affect reliability? Read on.

View Story

Cleaning a No-clean Flux: The Worst Decision You’ve Ever Made?

09-04-2018

There are a few reasons to choose to clean a no-clean flux, such as when the PCB assembly requires conformal coating, or when probes are required for testing. Other than that, there seems to be no need to clean a no-clean flux. This column tells you more.

View Story

Contamination: The Enemy of Electronics

07-18-2018

Welcome to the first installation of “Quest for Reliability.” The goal behind this column is to use my experience at an independent laboratory for over 18 years to help readers understand PCBA reliability issues, and more importantly, prevent suspect conditions in the first place. The laboratory I work in has served every sector of the electronics industry, from oil and gas equipment designed to function miles below the surface of the earth, to aerospace companies and everywhere in between.

View Story
Copyright © 2019 I-Connect007. All rights reserved.