PADS Webinar: Simulate and Optimize Analog, Mixed-Signal Circuit Design


Reading time ( words)

Taking a product design from concept to creation can be a complicated process of decisions and tradeoffs. Attention to every detail is required, particularly for the analog, mixed-signal portions of your design.

This webinar will introduce designers to the PADS AMS Design Suite, a complete design capture solution and analog, mixed-signal (AMS) virtual prototyping environment. With this suite, you will be able to create electronic product designs faster and easier while ensuring design intent, performance, and reliability.

What Attendees Will Learn

  • Types of circuit simulation and analysis for behavioral verification, scenario exploration, and component optimization
  • The power and flexibility of VHDL-AMS and SPICE-based simulation and modeling to accurately represent both a circuit’s electronic and electromechanical elements
  • How to balance component costs with tight tolerances against their impact on circuit and manufacturing performance
  • How to use a waveform analysis tool and expression calculator for in-depth analysis, measurement, and transformation of simulation data
  • The use of the PADS AMS Design Suite for design, simulation, and analysis of analog, mixed-signal (AMS) circuits

About the Presenter

Josh Moore is a business development and product manager for Mentor Graphics specializing in new business development. He is responsible for strategic partnerships to establish and develop new market opportunities as well as product management for the PADS circuit simulation solutions.

To view this on-demand webinar, click here.

Share

Print


Suggested Items

John Watson Discusses His Favorite Career Moments

12/25/2020 | I-Connect007 Editorial Team
As we celebrate the holidays after a tumultuous year, it’s important to remember all of the good things in our lives. In this short video, Altium’s John Watson discusses a few of the moments that really stand out in his career: earning his IPC Certified Interconnect Designer credentials and designing his very first circuit board.

Flexible Circuit Technology Workshop #5 Tackles Structures, Applications, Materials, and Manufacturing Processes: Think and Plan in Three Dimensions!

10/01/2020 | I-Connect007 Editorial Team
In just 15 minutes, flex expert Joe Fjelstad will teach you about implementing this useful technology into your manufacturing operation. Joe suggests you start with defining your end-product requirements and understanding cost and product life cycle expectations, as well as end-user needs. He further addresses the many considerations with adopting this useful technology.

Book Excerpt: Power Integrity By Example, Chapter 5

07/16/2020 | Fadi Deek, Mentor, a Siemens Business
The following is an excerpt from The Printed Circuit Designer's Guide to... Power Integrity by Example, written by Fadi Deek of Mentor, a Siemens Business. In this free eBook, Deek addresses problematic issues within electronic transmissions, and presents a variety of simulations and analyses in every chapter.



Copyright © 2021 I-Connect007. All rights reserved.