Taylor Guitars Protected with Analog, RF Circuitry


Reading time ( words)

For over 30 years, Taylor Guitars has been building some of the best acoustic guitars around. From their entry-level models through their high-end custom models that will set you back five figures, one thing is certain: These are fine musical instruments.

Taylor, based on El Cajon, California, knows that their customers want to protect their investment.  So they developed TaylorSense, a device that fits inside your guitar and signals an app on your phone when the guitar is too hot or cold, or too dry.

taylorsense-installation.jpgTrenton Blizzard is an electrical engineer on the team that developed TaylorSense. During the NAMM Show, Trenton spoke with me, along with Editors Dick Crowe and Dan Feinberg, about this new device, and what it’s like being an electrical engineer for a “woodworking shop.”  
 

Andy Shaughnessy:  I’m speaking with Trenton Blizzard from Taylor Guitars. Trenton, I understand that you are the electrical engineer who helped design the new TaylorSense.

Trenton Blizzard: Yes, I am part of the team who is developing the TaylorSense battery box.

Shaughnessy: Tell us about the TaylorSense and the process behind designing that.

Blizzard: TaylorSense will allow Taylor owners to monitor the temperature, relative humidity, battery life and impacts of their guitars. What's really cool is the device records this data, and then uploads it to your phone once you connect to it using the Taylor APP. The Taylor APP sends you alerts if your guitars conditions are undesirable. Let’s say you forgot your guitar in your car and it's hot outside and super dry, as long as you are within Bluetooth LE range you will get an alert that lets you know your guitar is at risk of getting too hot and drying out.

TaylorSense is a very cool tool that not only helps protect guitars, but also helps educate guitar players regarding the environmental conditions surrounding their instruments. This is not only important for acoustic guitars, but for all “hygroscopic” (water absorbing) investments such as pianos, acoustic basses, violins, wood flooring, as well solid wood furniture.

It’s fairly common to see a guitar set-up misdiagnosed as a “bad neck angle” when in reality the guitar is either too dry or too wet. Again, the value of the environmental information that TaylorSense can present to a player can’t be understated.

One of the biggest challenges in bringing all of this technical information to guitar players is keeping it practical in everyday use. Early on we defined a few guidelines before getting started.  First, the device must be simple to use.  Second, it must communicate data clearly. Third, the information must be applicable to real world conditions. Fourth, the design must not degrade the quality of the guitars amplified tone.

Shaughnessy: How did you get started on this? How did you settle on the design?

Blizzard: Since I’m involved in all electronic development projects at Taylor, I’ve been involved since the beginning of development. As far as “settle” goes, we looked at the most common problems of acoustic guitar care: Temperature, humidity and damage due to impacts and drops. There are many other features we could have included in TaylorSense, but in our goal to keep it simple we decided to only add a battery life indicator.

Shaughnessy: What's your background?

Namm-2016.jpg

Blizzard: My background is in analog and mixed signal design. I’ve been designing all of the electronics at Taylor since 2003. The TaylorSense design is almost all 100% digital. One of my responsibilities is to help ensure the digital circuits don’t corrupt our analog signal lines. My secondary responsibilities are to ensure that contract manufacturing operates smoothly.

Dick Crowe: Where is Bluestream located?

Blizzard: Bluestream is located in Boston. Robert Bean, Michael Audi, and Michael Gordon are the three that are heading up the hardware and framework side of the design.

Shaughnessy: So this is like a multi-pronged team: You've got to develop the app, develop the hardware, the circuit board and so on.

Blizzard: We're always pushing ourselves beyond our comfort zones. We play guitars, we build guitars, we love wood, and everybody at the factory is very comfortable with that. But, now all of a sudden we say, “We need an app developer.”  Sonoma Wire Works is doing the app work for us. The Taylor team is headed up by Tim O’Brien, Scott Reinhardt, Patrick Healy and I.   

Shaughnessy: You're a woodworking company at heart, but now you're dealing with RF issues.

Blizzard: Thankfully I’m no stranger to dealing with radio frequency interference issues. Many of our designs use switching power supplies so I have spent plenty of hours at local RF test labs. However, for this design, Bluestream is handling the FCC certification and Bluetooth SIG compliance.

Dan Feinberg: Is the output on this digital or analog?

Blizzard: The guitar’s preamplifier output signal is 100% analog. Only the data is digital, via Bluetooth LE.

Feinberg: In the cases where some people prefer analog, can you do that?

Blizzard: Preserving the analog signal path was one of our original requirements. The guitar signal is purely analog.

Feinberg: So, do you have a digital/analog converter?

Blizzard: Absolutely not. It’s very important to us that we preserve the amplified sound of the guitars. With TaylorSense your guitar tone is 100% analog. No audio is processed digitally.

Feinberg: And everybody buys that? I mean, I believe you [laughs].

Blizzard: TaylorSense users can rest easy knowing their guitar tone is 100% analog. I verified it myself.

Feinberg: Because analog is a religion to some people. It isn't to me, but it is to some people.

Blizzard: Yes, we believe that as well. The analog preamplifier signals are not being digitized in any way.

Namm-DCrowe2016.jpgCrowe: I would be proud of it; it’s such a nice tool.

Shaughnessy:  Is there anything else you want to add, Trenton?

Blizzard: This whole design has been a huge learning curve for us, but like all things at Taylor, we're not afraid to take on new challenges or ideas. Doing this type of work you get beat down a lot, but it’s what you end up with in the end that makes it worth the effort. It’s also nice working with such a great team.    I encourage you to visit Taylorsense.com to find out more.

Shaughnessy: Thanks, Trenton, I appreciate it.

Blizzard: Thanks, guys.

 

 

 

Share


Suggested Items

Cannonballs, eBooks, and Signal Integrity

12/04/2017 | Andy Shaughnessy and Pete Starkey, I-Connect007
I-Connect007 editors Andy Shaughnessy and Pete Starkey recently met with Polar Instruments Managing Director Martyn Gaudion at productronica. They discussed the success of "The Printed Circuit Designer’s Guide to…Secrets of High-Speed PCBs," the ongoing challenge of facilitating communication between designers and fabricators, and the influence of chemical bond-enhancement processes on insertion loss.

Insulectro Teams with Isola to Address Signal Integrity Needs

11/06/2017 | Andy Shaughnessy, PCB Design007
Insulectro and Isola recently shared a combined booth during PCB West 2017. Insulectro has distributed Isola materials for years, and the companies wanted to focus on Isola’s line-up of high-speed, low-loss material sets. Insulectro’s Chris Hunrath, VP of Technology, and Norm Berry, Director of Laminates and OEM Marketing, sat down with me to discuss the challenges facing signal integrity engineers today, and some of the Isola low-loss, low-Dk materials that can help with their signal integrity requirements. You might find Chris and Norm speaking to a group of PCB designers near you.

SiSoft Preparing for DDR5 Simulation Next Year

11/01/2017 | Andy Shaughnessy, PCB Design007
DDR5 is expected to double the memory bandwidth and density of DDR4. Andy Shaughnessy recently spoke with SiSoft CTO Walter Katz about his company’s efforts to hit the market with this game-changing technology in 2018.



Copyright © 2017 I-Connect007. All rights reserved.