-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Roles of the Designer and the Design Engineer
May 25, 2016 | Steve Hageman, Analog HomeEstimated reading time: 2 minutes
Steve Hageman has been designing electronics since elementary school. An engineer by trade, he has decades of experience performing PCB design and layout. He spent years at HP, Agilent and Calex before hanging out a shingle for his engineering company, Analog Home. As someone who wears engineer and designer hats, Steve was a natural for this month’s issue. I asked Steve to give us his opinion about the divide between some PCB designers and their engineers, and what can be done to solve this problem.
Andy Shaughnessy: Steve, tell us a little bit about your company and how you operate.
Steve Hageman: I have experience working for companies of 50 people, to working for a company with 10,000 employees, to working as an individual contributor solving my specific customers’ problems. As most engineers will agree, solving specific customers’ problems is perhaps the most rewarding.
Shaughnessy: A recent survey of our PCB designer readers found that there’s often friction between PCB designers and engineers. Some designers say their EEs are their biggest challenge. Why do you think there’s such disconnect?
Hageman: I remember a quote by David Packard: “Follow the advice that Abraham Lincoln gave himself: ‘If I don’t like this man, I have to get to known him better.’” I have found that to be very true. Mr. Packard also knew that to get along with others you had to understand what they face as challenges. Taking the time to see the other person’s point of view is very hard today with the crush of schedules that we all have.
I think the biggest disconnect is the schedule compression that happens. We all know how this goes: The design takes longer than expected, so the PCB start date is pushed out, but the PCB delivery date is not changed, hence the poor guy that is last on the schedule has his schedule compressed beyond belief. By then, everything is rushed and things fall through the cracks. And what falls through the cracks typically is the EE design constraints.
The PCB folks are also pushed by manufacturing and these manufacturing rules are oftentimes only vaguely known by the EEs, hence they don't know what to allow for.
At very large companies there is a third entity pushing the PCB layout: the EMC/safety folks. Again, more constraints and rules that the EE may only vaguely know about. All of this comes together with schedule compression and causes the PCB folks to have to redo portions of the design to meet all the known and unknown design constraints.
Redoing work is never fun for anyone, especially when the time demands are so great. The only solution that I know of is to learn from the uncovered serious problems and with the team decide a path forward to try to prevent these from happening again in the future. And then try to stick to the plan.
To read this entire article, which appeared in the April 2016 issue of The PCB Design Magazine, click here.
Suggested Items
SMTA’s Conducts First UHDI Symposium
03/29/2024 | Marcy LaRont, PCB007 MagazineSMTA’s first UHDI Symposium in Peoria, Arizona, on Tuesday, March 26 featured a standout full-day technical program with 11 separate presentations on what will be required for our companies to move to ultra HDI manufacturing. The event was the brainchild of Tara Dunn, SMTA director of training and education. It included a compelling and collaborative presentation by David Haboud of Altium, John Johnson of American Standards Circuits, and Chrys Shea of Shea Engineering, who had spent the past several weeks creating and building an appropriate SMT test board vehicle for UHDI, something that was passed around for all conference goers to see and touch.
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.